☆ 4.4 Article

Accuracy of Computerized Optical Impression Making in Fabrication of Removable Dentures for Partially Edentulous Jaws: An In Vivo Feasibility Study

JOURNAL OF FUNCTIONAL BIOMATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Dentistry, Oral Surgery & Medicine

Fit of zirconia fixed partial dentures fabricated from conventional impressions and digital scans: A systematic review and meta-analysis

Noha Morsy et al.

Summary: This systematic review and meta-analysis aimed to compare the fit accuracy of zirconia fixed partial dentures fabricated from conventional impressions and digital scans. The results showed that digital scans provided significantly better marginal and intaglio fit compared to conventional impressions. These findings provide important evidence, but further clinical studies are needed to support these results.

JOURNAL OF PROSTHETIC DENTISTRY (2023)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

In vitro accuracy of digital and conventional impressions in the partially edentulous maxilla

Moritz Waldecker et al.

Summary: This in vitro study compared the dimensional accuracy of conventional impressions with that of digital impressions in a partially edentulous maxilla. Digital impressions showed better accuracy in shorter scan distances, while conventional impressions performed better in longer scan distances. The vertical and tooth axis deviations were significantly smaller for conventional impressions than for digital impressions.

CLINICAL ORAL INVESTIGATIONS (2022)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Do cut out-rescan procedures have an impact on the accuracy of intraoral digital scans?

Sven Reich et al.

Summary: The purpose of the study was to determine whether cut out-rescan procedures change the accuracy of a 3D cast. Significant differences were found among the scanners, but cut out-rescan procedures did not affect the accuracy within each scanning system.

JOURNAL OF PROSTHETIC DENTISTRY (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of intraoral scanning in completely and partially edentulous maxillary and mandibular jaws: an in vitro analysis

Martin Schimmel et al.

Summary: The study evaluated the accuracy of intraoral scanning in partially and completely edentulous arch models, finding high accuracy in vitro. Operator experience had minimal influence on the accuracy of the scans, with differences in trueness and precision seen among different models and operators.

CLINICAL ORAL INVESTIGATIONS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of complete-arch intraoral scans based on confocal microscopy versus optical triangulation: A comparative in vitro study

Moritz Waldecker et al.

Summary: This study compared the accuracy of two intraoral scanners, showing that the TR scanner had better accuracy and precision than the OC scanner, making it suitable for the fabrication of inlays and short-span fixed partial dentures. Complete-arch scans had discrepancies that made them unsuitable for long-span fixed partial dentures.

JOURNAL OF PROSTHETIC DENTISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inlay-Retained Dental Bridges-A Finite Element Analysis

Monica Tatarciuc et al.

Summary: The study evaluated the stability and stress on supporting teeth of inlay-retained dental bridges using the finite element method (FEM) under masticatory forces. The analysis revealed that the stress from loading force does not cause damage to the prosthetic device or abutment teeth.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Use of measuring gauges for in vivo accuracy analysis of intraoral scanners: a pilot study

Mikel Iturrate et al.

Summary: This study aimed to evaluate the accuracy of intraoral scanners (IOS) used in vivo, proposing a specific methodology for measurement and comparison of accuracy. The results showed that accuracy worsened as the scanning area increased.

JOURNAL OF ADVANCED PROSTHODONTICS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Full-arch accuracy of five intraoral scanners: In vivo analysis of trueness and precision

Miran Kwon et al.

Summary: This study evaluated the trueness and precision of full-arch scans acquired using five intraoral scanners and found that the type of scanner and the measured linear distances significantly affected the accuracy of the intraoral scan data. Errors in trueness and precision were observed with different scanners, with Omnicam showing greater errors in certain measurements compared to other scanners. The differences in dimensional accuracy of intraoral scan data based on scanner type were clinically significant.

KOREAN JOURNAL OF ORTHODONTICS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effects of Training on the Execution of Complete-Arch Scans. Part 2: Scanning Accuracy

Moritz Waldecker et al.

Summary: This study found that specific training is highly recommended for achieving the best accuracy in complete arch scans, while nonspecific training also leads to an improvement in initial scanning accuracy for first-time users.

INTERNATIONAL JOURNAL OF PROSTHODONTICS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of full-arch digital impressions: an in vitro and in vivo comparison

Christine Keul et al.

CLINICAL ORAL INVESTIGATIONS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Full arch precision of six intraoral scanners in vitro

C. A. Osnes et al.

JOURNAL OF PROSTHODONTIC RESEARCH (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of virtual interocclusal records for partially edentulous patients

Shuxin Ren et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

添加到收藏夹

Article Medicine, General & Internal

Accuracy of Digital and Conventional Full-Arch Impressions in Patients: An Update

Alexander Schmidt et al.

JOURNAL OF CLINICAL MEDICINE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Trueness and precision of intraoral scanners in the maxillary dental arch: an in vivo analysis

Jonas Winkler et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Computerized optical impression making of edentulous jaws - An in vivo feasibility study

Gary Hack et al.

JOURNAL OF PROSTHODONTIC RESEARCH (2020)

添加到收藏夹

Review Chemistry, Physical

3D Digital Impression Systems Compared with Traditional Techniques in Dentistry: A Recent Data Systematic Review

Marco Cicciu et al.

MATERIALS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of saliva isolation and intraoral light levels on performance of intraoral scanners

Hasan Camc et al.

AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2020)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Marginal Adaptation of CAD/CAM All-Ceramic Crowns Made by Different Impression Methods: A Literature Review

Yeganeh Memari et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)

添加到收藏夹

Article Medicine, General & Internal

Repeatability of Intraoral Scanners for Complete Arch Scan of Partially Edentulous Dentitions: An In Vitro Study

Jae-Hyun Lee et al.

JOURNAL OF CLINICAL MEDICINE (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Trueness of CAD/CAM digitization with a desktop scanner - an in vitro study

G. Joos-Kovacs et al.

BMC ORAL HEALTH (2019)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Digital versus conventional impressions for full-coverage restorations A systematic review and meta-analysis

Sanket R. Nagarkar et al.

JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Trueness and precision of digital impressions obtained using an intraoral scanner with different head size in the partially edentulous mandible

Hironari Hayama et al.

JOURNAL OF PROSTHODONTIC RESEARCH (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Fully digital workflow, integrating dental scan, smile design and CAD-CAM: case report

Miguel Stanley et al.

BMC ORAL HEALTH (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Time efficiency, difficulty, and operator's preference comparing digital and conventional implant impressions: a randomized controlled trial

Tim Joda et al.

CLINICAL ORAL IMPLANTS RESEARCH (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Feasibility and Accuracy of Digitizing Edentulous Maxillectomy Defects: A Comparative Study

Mahmoud E. Elbashti et al.

INTERNATIONAL JOURNAL OF PROSTHODONTICS (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Influence of material surface on the scanning error of a powder-free 3D measuring system

Michael Kurz et al.

CLINICAL ORAL INVESTIGATIONS (2015)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of Optical Dental Digitizers: An In Vitro Study

Stefan Vandeweghe et al.

INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY (2015)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Intraoral Digital Impression Technique: A Review

Su Ting-shu et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2015)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Accuracy of computer-aided design/computer-aided manufacturing-generated dental casts based on intraoral scanner data

Sebastian B. M. Patzelt et al.

JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2014)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Assessing the feasibility and accuracy of digitizing edentulous jaws

Sebastian B. M. Patzelt et al.

JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.