☆ 4.6 Article

Thermal management of electronic components based on hierarchical microchannels and nanofluids

THERMAL SCIENCE AND ENGINEERING PROGRESS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Two-phase mixture simulation of the performance of a grooved helical microchannel heat sink filled with biologically prepared water-silver nanofluid: Hydrothermal characteristics and irreversibility behavior

Mahan Hasani et al.

Summary: This study investigates the influence of using staggered and parallel grooved channel geometries on the hydrothermal performance of a helical microchannel heat sink, finding that the staggered grooved configuration demonstrates the highest performance.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids

Jin Wang et al.

Summary: This paper presents a comparative analysis of pin fins and vortex generators to determine their optimal cross-section shape and parameters. A novel combined structure is proposed to enhance the thermal performance of an integrated microchannel heat sink. The effects of nanoparticle diameter and volume fraction are investigated using Al2O3 nanofluid and DI-water. The results show that oval pin fins and the optimal vortex generator significantly improve the heat transfer and hydraulic performance of the heat sink.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Machine learning regression-CFD models for the nanofluid heat transfer of a microchannel heat sink with double synthetic jets

Javad Mohammadpour et al.

Summary: The study investigated the impact of geometrical and operational parameters on nanofluid heat transfer in a microchannel heat sink with double synthetic jets using a combination of computational fluid dynamics and machine learning algorithms. The addition of nanoparticles and staggered dimples in active jet scenarios significantly reduced the maximum temperature, while the k-nearest neighbor regression model showed more accurate predictions than other machine learning algorithms. In cases of in-phase actuation, the conductive heat transfer rate was maximized by 53.99%.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Thermohydraulic assessment of a novel hybrid nanofluid containing cobalt oxide-decorated reduced graphene oxide nanocomposite in a microchannel heat sink with sinusoidal cavities and rectangular ribs

Mohammad Jamshidmofid et al.

Summary: The merit of utilizing an innovative water-based nanofluid containing the reduced graphene oxide-cobalt oxide hybrid nanocomposite in a microchannel heat sink equipped with rectangular ribs and sinusoidal cavities is assessed in this article. The numerical simulation shows that even though the nanofluid reduces the vortices, the thermal features improve significantly due to enhanced thermal conductivity, resulting in increased convective heat transfer coefficient, solid temperature, temperature uniformity, and thermal resistance.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Chemistry, Physical

The computational study of microchannel thickness effects on H2O/CuO nanofluid flow with molecular dynamics simulations

Yanpeng Shang et al.

Summary: This paper describes the atomic behavior of H2O-CuO nanofluid inside a Pt microchannel using Molecular Dynamics simulation. The simulation results show that the thickness of the microchannel is an important parameter for the flow of nanofluid, affecting the aggregation time and energy of nanoparticles. Furthermore, the simulations indicate that increasing the microchannel thickness increases the adsorption force between Pt atoms and nanofluid particles.

JOURNAL OF MOLECULAR LIQUIDS (2022)

添加到收藏夹

Article Energy & Fuels

Simulation of hybrid nanofluid flow within a microchannel heat sink considering porous media analyzing CPU stability

Jinyuan Wang et al.

Summary: The article numerically investigated and compared forced convection in three different configurations of a 3D heat sink. By utilizing different porous material models and nanofluid coolant, the study evaluated the effects of material composition on the cooling performance of the heat sink.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Natural convection in F-shaped cavity filled with Ag-water non-Newtonian nanofluid saturated with a porous medium and subjected to a horizontal periodic magnetic field

Ahmed Kadhim Hussein et al.

Summary: Natural convection in an F-shaped cavity containing Ag-water non-Newtonian nanofluid saturated with a porous medium is numerically investigated. The study finds that the average Nusselt number increases with increasing solid volume fraction, Darcy number, and Rayleigh number, while it decreases with increasing power law index and Hartmann number. Furthermore, the relationship between the average Nusselt number and the periodic shape parameter depends on the values of the Rayleigh number and power law index.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

Thermal-hydraulic performance of a nanofluid in a shell-and-tube heat exchanger equipped with new trapezoidal inclined baffles: Nanoparticle shape effect

Mehdi Bahiraei et al.

Summary: The study analyzed the influences of diverse shapes of nanoparticles on the thermal-hydraulic efficacy of a nanofluid containing boehmite nanoparticles in a shell and tube heat exchanger. Different particle shapes had varying effects on the heat transfer performance, with the nanofluid with platelet particles demonstrating the highest overall heat transfer coefficient. Additionally, the nanofluid with Os nanoparticles exhibited the greatest effectiveness compared to other nanoparticle suspensions with different shapes.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Cooling of a lithium-ion battery using microchannel heatsink with wavy microtubes in the presence of nanofluid

Akram Jahanbakhshi et al.

Summary: This study investigates the utilization of wavy microchannels and microtubes in a cooling system for lithium-ion batteries, using silver-water/ethylene glycol nanofluid as the working fluid. The results demonstrate that counter flow in microchannels and microtubes creates a more uniform temperature profile on the battery surface, while the use of nanofluid ensures the battery temperature stays within a safe operating range.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of solar system equipped with innovative turbulator and hybrid nanofluid

M. Sheikholeslami

Summary: This article investigates the use of horseshoe-shaped fins and perforated tape in a solar system to improve productivity and mixing efficiency. The selected modeling techniques were found to be suitable for turbulent flow based on the comparison with empirical data. The study shows that dispersing hybrid nano-powders can enhance heat absorption and thermal efficiency, but at the cost of increased pumping power.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Thermodynamics

Experimental study of the effect of simultaneous application of the air- and water-cooled flow on efficiency in a Photovoltaic thermal solar collector with porous plates

Saeed Aghakhani et al.

Summary: This paper examines the effect of simultaneous use of air-and water-cooled flow on the efficiency of a solar photovoltaic thermal (PVT) panel. The results show that increasing the volumetric flow rate of water enhances the electrical efficiency of PVT, while increasing the number of fans and volumetric flow rate of water improves the thermal efficiency and total efficiency of PVT.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Nanofluid heat transfer in a microchannel heat sink with multiple synthetic jets and protrusions

Javad Mohammadpour et al.

Summary: This study focuses on the innovative integration of different cooling techniques to maximize the thermal performance in a 3D microchannel heat sink (MCHS). The effect of particle concentration, orifice spacing, orifice height, oscillation frequency, membrane amplitude, and phase actuation on convective and conductive heat transfer is analyzed. In terms of thermal performance, 180 out-of-phase cases show a higher figure of merit (FOM) than in-phase SJs. Increasing the frequency and amplitude enhances the heat transfer.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Chemical

Two-phase simulation of irreversibilities for Ag-water nanofluid flow inside an elliptical pin-fin heat sink: Entropy generation and exergy considerations

Mehdi Bahiraei et al.

Summary: This paper examines the second law phenomena of a nanofluid within an elliptical pin-fin heat sink, providing design insights for high-performance heat sinks. The study reveals the impact of fin density and nanoparticles on thermal irreversibility.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Numerical analysis of solar energy storage within a double pipe utilizing nanoparticles for expedition of melting

M. Sheikholeslami

Summary: This study proposes the combination of thermal storage and solar concentrating systems, and suggests the use of new fins and dispersed ZnO nano-powders to improve the low conduction mode of pure paraffin. The numerical procedure has been verified and the simulation results demonstrate the effectiveness of the proposed configurations.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the hydrothermal aspects of water-Fe3O4 nanofluid inside a twisted tube

Mohammadreza Niknejadi et al.

Summary: This experimental investigation focuses on analyzing the laminar forced convection of water-based nanofluid (NF) containing Fe3O4 nanoparticles inside a twisted tube. The study examines the impacts of NF concentration, Reynolds number, and twist pitch on the average Nusselt number, friction factor, and overall hydrothermal performance indicator. The results show that the overall hydrothermal performance of NF in the twisted tube is superior to that of water in the plain tube, with the best performance occurring at NF concentration of 2% and twist pitch of 10 mm.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Diminishing vortex intensity and improving heat transfer by applying magnetic field on an injectable slip microchannel containing FMWNT/water nanofluid

Aliakbar Karimipour et al.

Summary: The study revealed that utilizing injection technique in the presence of a magnetic field in a microchannel containing FMWNT/water nanofluids can enhance heat transfer efficiency and reduce entropy generation; higher nanoparticle volume fraction and Reynolds number contribute to the amplification of the magnetic field effect.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Numerical analysis on the thermal performance of microchannel heat sinks with Al2O3 nanofluid and various fins

Abdullah Masoud Ali et al.

Summary: The study investigates the hydraulic and thermal performance of microchannel heat sink configurations for high performance electronic cooling applications using numerical modelling. Results show that inserting zig-zag fins and using 3% Al2O3 nanofluid coolant in the ducts significantly improve heat transfer efficiency and reduce contact temperature.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Effect of PCM and porous media/nanofluid on the thermal efficiency of microchannel heat sinks

Somayeh Davoodabadi Farahani et al.

Summary: This study aims to enhance the thermal behavior and hydraulic performance of a conventional microchannel heat sink (MCHS) through the use of porous material, phase change material (PCM), and nanofluid. The findings show that for a critical thickness of the porous substrate, the thermal performance reaches a minimum point. Increasing values of Darcy number, porosity coefficient, nanoparticle diameter, and PCM thickness lead to a decrease in the thermal performance of MCHS. A square geometry MCHS demonstrates superior thermal performance compared to other geometries, and the use of porous material, nanofluid, and PCM results in improved thermal behavior compared to a conventional microchannel.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic performance of a circular microchannel heat sink using swirl flow and nanofluid

Abdullah Masoud Ali et al.

Summary: The study investigates the hydraulic and heat transport performance of a silicon heat sink under different conditions, showing that the microchannel heat sink with swirl flow using Al2O3 nanofluid as coolant provides the lowest thermal resistance and contact temperature.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network

Lei Shi et al.

Summary: This study utilizes a neural network model to predict the thermophysical properties of magnetic nanofluids, demonstrating its accuracy compared to previous theoretical models and providing a theoretical basis for heat transfer.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Energy & Fuels

Preparation and photothermal conversion performance of carbon-silica nanocomposite films for spectrally selective solar absorbers

Zi Ding et al.

Summary: A one-step sol-gel method for preparing carbon and dielectric composites with a skeleton-skin structure was proposed in this study. The composite films exhibited excellent adjustable electrical and optical properties, making them potential candidates for conductive coatings. Analysis showed that the material consisted of a skeleton-skin structure.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Thermodynamics

Flow and heat transfer behavior of hybrid nanofluid through microchannel with two different channels

R. Vinoth et al.

Summary: The study compared the heat transfer performance of pentagonal and triangular channel oblique finned microchannel heat sinks using different nanofluids, with results showing that the pentagonal channel heat sink performed better in heat transfer and increased pressure drop when using hybrid nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Chemical

Hybrid nanofluids with temperature-dependent properties for use in double-layered microchannel heat sink; hydrothermal investigation

Sajjad Sarvar-Ardeh et al.

Summary: The study simulated forced convection heat transfer through a double-layered microchannel heat sink using the finite volume method, comparing the cooling capacities of different hybrid nanofluids under constant Reynolds number and flow rate conditions. The results showed that Al2O3-SiO2/water nanofluid has better cooling capacity, lower thermal resistance, but higher pumping power consumption compared to Al2O3-Cu/water nanofluid. Increasing the volumetric concentration of both nanofluids decreases thermal resistance and increases pumping power consumption.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Thermodynamics

Entropy generation of graphene-platinum hybrid nanofluid flow through a wavy cylindrical microchannel solar receiver by using neural networks

Raouf Khosravi et al.

Summary: This study analyzes the performance of graphene-platinum/water hybrid nanofluid flow in a cylindrical microchannel heat sink using the second law of thermodynamics. Increasing factors such as wave amplitude, nanoparticle concentration, and Reynolds number leads to a decrease in thermal entropy generation rate while frictional entropy increases. The Bejan number was found to be greater than 0.98 in all cases, indicating that irreversibility mainly results from thermal entropy generation. Evidently, increasing input variables reduces the thermal entropy generation rate. Additionally, an artificial neural network model was developed to predict entropy generation based on factors like wave amplitude, nanofluid concentration, and Reynolds number.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation of heat transfer enhancement using ionic liquid-Al2O3 hybrid nanofluid in a cylindrical microchannel heat sink

Amir Heidarshenas et al.

Summary: Recent research focuses on the preparation and application of nanofluids with specific requirements, such as durability, stable suspension of particles, and negligible agglomeration. A novel nanofluid containing ionic liquid-alumina nanohybrids was studied for its thermal performance and stability in miniature heat transfer devices. The hybrid nanofluid showed improved thermal performance compared to alumina nanofluid, especially at smaller particle sizes, making it a promising option for small scale heat transfer applications.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Computational study of rib shape and configuration for heat transfer and fluid flow characteristics of microchannel heat sinks with fan-shaped cavities

Qifeng Zhu et al.

Summary: The combination of cavities and ribs significantly affects the performance and efficiency of microchannel heat sink systems. Optimizing the shape and position of ribs is crucial for minimizing pressure drop and maximizing heat removal efficiency. Different shapes and dimensions of ribs have a noticeable impact on the overall system performance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Effects of surfactant and nanofluid on the performance and optimization of a microchannel heat sink

Hielfarith Suffri Shamsuddin et al.

Summary: This study investigates the influence of surfactant Triton X-100 on boron nitride nanotubes nanofluid in microchannel heat sink, showing that the surfactant can improve thermal performance at 30 degrees Celsius and reduce pressure drop at 50 degrees Celsius. Optimized MCHS dimensions given by MOPSO technique result in improved overall performance for MCHS systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Optimization of nanofluid heat transfer in a microchannel heat sink with multiple synthetic jets based on CFD-DPM and MLA

Javad Mohammadpour et al.

Summary: This study combines CFD and machine learning algorithms to optimize the cooling performance of Al2O3water nanofluids, finding that increasing membrane length improves heat transfer and the best heat transfer is achieved at a particle volume fraction of 5%.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Chemistry, Physical

Molecular dynamics simulation of water-based Ferro-nanofluid flow in the microchannel and nanochannel: Effects of number of layers and material of walls

Xiao-Yong Shen et al.

Summary: This paper investigates the effect of Fe3O4 nanoparticles on the behavior of water-based fluid by using molecular dynamics simulation, and explores the influence of channel wall material and number of layers on fluid flow. Increasing the number of wall layers can enhance interactions between fluid particles and walls, leading to an accumulation of fluid particles near channel walls and an increase in density.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Thermodynamics

Experimental study of temperature and mass fraction effects on thermal conductivity and dynamic viscosity of SiO2-oleic acid/liquid paraffin nanofluid

Zhixiong Li et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Natural convection of a hybrid nanofluid affected by an inclined periodic magnetic field within a porous medium

Mohsen Izadi et al.

CHINESE JOURNAL OF PHYSICS (2020)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Inclined Lorentz force impact on convective-radiative heat exchange of micropolar nanofluid inside a porous enclosure with tilted elliptical heater

Shu-Rong Yan et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Mechanical

Natural convection of a magnetizable hybrid nanofluid inside a porous enclosure subjected to two variable magnetic fields

Mohsen Izadi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Thermodynamics

Two phase natural convection and thermal radiation of Non-Newtonian nanofluid in a porous cavity considering inclined cavity and size of inside cylinders

Pouya Barnoon et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Impact of variable fluid properties on forced convection of Fe3O4/CNT/water hybrid nanofluid in a double-pipe mini-channel heat exchanger

Amin Shahsavar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Engineering, Chemical

Effects of SiO2 nanoparticles on pool boiling heat transfer characteristics of water based nanofluids in a cylindrical vessel

Yanwei Hu et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Thermodynamics

Two-phase lattice Boltzmann simulation of the effects of base fluid and nanoparticle size on natural convection heat transfer of nanofluid

Cong Qi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Experimental and numerical research on the flow and heat transfer characteristics of TiO2-water nanofluids in a corrugated tube

Cong Qi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Chemistry, Physical

Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger

Omid Mahian et al.

NANO ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Efficacy of a novel liquid block working with a nanofluid containing graphene nanoplatelets decorated with silver nanoparticles compared with conventional CPU coolers

Mehdi Bahiraei et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Study on the flow and heat transfer of liquid metal based nanofluid with different nanoparticle radiuses using two-phase lattice Boltzmann method

Cong Qi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Developing the laminar MHD forced convection flow of water/FMWNT carbon nanotubes in a microchannel imposed the uniform heat flux

Arash Karimipour et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.