相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of additive manufacturing process and storage condition on the dimensional accuracy and stability of 3D-printed dental casts
Hazem Yousef et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Industry 4.0 and Digitalisation in Healthcare
Vladimir V. Popov et al.
MATERIALS (2022)
A Review of 3D Printed Bone Implants
Zhaolong Li et al.
MICROMACHINES (2022)
3D bioprinting: Materials, processes, and applications
Paulo Bartolo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2022)
Industry 5.0 technology capabilities in Trauma and Orthopaedics
Karthikeyan P. Iyengar et al.
JOURNAL OF ORTHOPAEDICS (2022)
The potential of spring distraction to dynamically correct complex spinal deformities in the growing child
Sebastiaan P. J. Wijdicks et al.
EUROPEAN SPINE JOURNAL (2021)
Complicated Postoperative Flat Back Deformity Correction With the Aid of Virtual and 3D Printed Anatomical Models: Case Report
Jennifer Fayad et al.
FRONTIERS IN SURGERY (2021)
Progress in the Application of 3D Printing Technology in Spine Surgery
Xiaojiang Sun et al.
Journal of Shanghai Jiaotong University (Science) (2021)
Three-Dimensional Printed Anatomic Modeling for Surgical Planning and Real-Time Operative Guidance in Complex Primary Spinal Column Tumors: Single-Center Experience and Case Series
Owen P. Leary et al.
WORLD NEUROSURGERY (2021)
Application of 3D-Printed Model in the Cervical Spine Osteochondroma Surgery: A Case Report
Jyun-Yi Liao et al.
ENT-EAR NOSE & THROAT JOURNAL (2021)
Systemic toxicity eliciting metal ion levels from metallic implants and orthopedic devices - A mini review
Ravindra V. Badhe et al.
TOXICOLOGY LETTERS (2021)
Three-dimensional-printed individualized porous implants: A new implant-bone interface fusion concept for large bone defect treatment
Teng Zhang et al.
BIOACTIVE MATERIALS (2021)
A state-of-the-art review on energy consumption and quality characteristics in metal additive manufacturing processes
Arfan Majeed et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Complete Osseointegration of a Retrieved 3-D Printed Porous Titanium Cervical Cage
Wimar van den Brink et al.
FRONTIERS IN SURGERY (2020)
Three-dimensional printing for the accurate orthopedics: clinical cases analysis
Xie-Ping Dong et al.
BIO-DESIGN AND MANUFACTURING (2020)
Three-Dimensional Printing-Assisted Cervical Anterior Bilateral Pedicle Screw Fixation of Artificial Vertebral Body for Cervical Tuberculosis
Yuan-Wei Zhang et al.
WORLD NEUROSURGERY (2019)
Three-Dimensional-Printed Individualized Guiding Templates for Surgical Correction of Severe Kyphoscoliosis Secondary to Ankylosing Spondylitis: Outcomes of 9 Cases
Qiang Tu et al.
WORLD NEUROSURGERY (2019)
Feasibility of mixed reality-based intraoperative three-dimensional image-guided navigation for atlanto-axial pedicle screw placement
Xinghuo Wu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2019)
Anterior Lumbar Interbody Fusion Using a Personalized Approach: Is Custom the Future of Implants for Anterior Lumbar Interbody Fusion Surgery?
Ralph J. Mobbs et al.
WORLD NEUROSURGERY (2019)
Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview
Abid Haleem et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)
Designing patient-specific 3D printed devices for posterior atlantoaxial transarticular fixation surgery
Ganesha K. Thayaparan et al.
JOURNAL OF CLINICAL NEUROSCIENCE (2018)
Custom-Made Titanium 3-Dimensional Printed Interbody Cages for Treatment of Osteoporotic Fracture-Related Spinal Deformity
Timothy L. Siu et al.
WORLD NEUROSURGERY (2018)
Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application
Philipp Honigmann et al.
BIOMED RESEARCH INTERNATIONAL (2018)
Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors: Preliminary results on a case-series of 13 patients
Marco Girolami et al.
EUROPEAN SPINE JOURNAL (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
Design and additive manufacturing of patient-specific cranial and pelvic bone implants from computed tomography data
Yashwant Kumar Modi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Printing the Future-Updates in 3D Printing for Surgical Applications
Dekel Shilo et al.
RAMBAM MAIMONIDES MEDICAL JOURNAL (2018)
Preliminary application of a multi-level 3D printing drill guide template for pedicle screw placement in severe and rigid scoliosis
Kun Liu et al.
EUROPEAN SPINE JOURNAL (2017)
Applications of 3D printing in the management of severe spinal conditions
Elena Provaggi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2017)
The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report
Ralph J. Mobbs et al.
JOURNAL OF NEUROSURGERY-SPINE (2017)
Deviation analysis for C1/2 pedicle screw placement using a three-dimensional printed drilling guide
Xinghuo Wu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2017)
Multilevel 3D Printing Implant for Reconstructing Cervical Spine With Metastatic Papillary Thyroid Carcinoma
Xiucan Li et al.
SPINE (2017)
Accurate and Simple Screw Insertion Procedure With Patient-Specific Screw Guide Templates for Posterior C1-C2 Fixation
Taku Sugawara et al.
SPINE (2017)
Reconstruction of Thoracic Spine Using a Personalized 3D-Printed Vertebral Body in Adolescent with T9 Primary Bone Tumor
Wen Jie Choy et al.
WORLD NEUROSURGERY (2017)
A New Navigational Tool for Pedicle Screw Placement in Patients With Severe Scoliosis A Pilot Study to Prove Feasibility, Accuracy, and Identify Operative Challenges
Michael Putzier et al.
CLINICAL SPINE SURGERY (2017)
Individualized 3D printing navigation template for pedicle screw fixation in upper cervical spine
Fei Guo et al.
PLOS ONE (2017)
Fortifying the Bone-Implant Interface Part 1: An In Vitro Evaluation of 3D-Printed and TPS Porous Surfaces
Regina F. MacBarb et al.
INTERNATIONAL JOURNAL OF SPINE SURGERY (2017)
Additive-manufactured patient-specific titanium templates for thoracic pedicle screw placement: novel design with reduced contact area
Mitsuru Takemoto et al.
EUROPEAN SPINE JOURNAL (2016)
Biomechanical investigation into the structural design of porous additive manufactured cages using numerical and experimental approaches
Pei-I Tsai et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2016)
Utility of a custom screw insertion guide and a full-scale, color-coded 3D plaster model for guiding safe surgical exposure and screw insertion during spine revision surgery
Bungo Otsuki et al.
JOURNAL OF NEUROSURGERY-SPINE (2016)
Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma
Nanfang Xu et al.
SPINE (2016)
Thoracic Pedicle Screw Placement Guide Plate Produced by Three-Dimensional (3-D) Laser Printing
Hongliang Chen et al.
MEDICAL SCIENCE MONITOR (2016)
Clinical application of three-dimensional printing in the personalized treatment of complex spinal disorders
Yi-Tian Wang et al.
CHINESE JOURNAL OF TRAUMATOLOGY (2016)
Clinical Use of 3D Printing Guide Plate in Posterior Lumbar Pedicle Screw Fixation
Hongliang Chen et al.
MEDICAL SCIENCE MONITOR (2015)
A review on 3D printed bioimplants
Chee Meng Benjamin Ho et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
A novel screw guiding method with a screw guide template system for posterior C-2 fixation
Shuichi Kaneyama et al.
JOURNAL OF NEUROSURGERY-SPINE (2014)
Clinical Application of Computer-aided Design-rapid Prototyping in C1-C2 Operation Techniques for Complex Atlantoaxial Instability
Jin-Cheng Yang et al.
JOURNAL OF SPINAL DISORDERS & TECHNIQUES (2014)
A multi-level rapid prototyping drill guide template reduces the perforation risk of pedicle screw placement in the lumbar and sacral spine
Matjaz Merc et al.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2013)
Efficacy and accuracy of a novel rapid prototyping drill template for cervical pedicle screw placement
Sheng Lu et al.
COMPUTER AIDED SURGERY (2011)
Personalised modified osteotomy using computer-aided design-rapid prototyping to correct thoracic deformities
Jin Cheng Yang et al.
INTERNATIONAL ORTHOPAEDICS (2011)
A novel computer-assisted drill guide template for lumbar pedicle screw placement: a cadaveric and clinical study
Sheng Lu et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2009)
Stereolithography in spine pathology: a 2-case report
Ignacio Madrazo et al.
SURGICAL NEUROLOGY (2009)
Application of full-scale three-dimensional models in patients with rheumatoid cervical spine
Jun Mizutani et al.
EUROPEAN SPINE JOURNAL (2008)
The use of physical biomodelling in complex spinal surgery
Maree T. Izatt et al.
EUROPEAN SPINE JOURNAL (2007)
Biomodeling as an aid to spinal instrumentation
PS D'Urso et al.
SPINE (2005)