☆ 3.9 Article

On the design of a solar heat storage tank at 120°C

INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

A novel cascade latent heat thermal energy storage system consisting of erythritol and paraffin wax for deep recovery of medium-temperature industrial waste heat

Sheng Yang et al.

Summary: Recovering medium-temperature industrial waste heat through latent heat thermal energy storage (LHTES) can significantly reduce fossil fuel consumption. A cascade LHTES system combining erythritol and paraffin wax units was proposed to recover waste heat during charging and increase heat supply temperature during discharging. Prototype testing showed that the cascade system improved waste heat recovery efficiency from 15.8% to 63.4% and increased the average heat supply temperature from 37°C to 53.6°C. This highly efficient cascade LHTES system has great potential for decarbonized space heating.

ENERGY (2023)

添加到收藏夹

Article Thermodynamics

Genetic algorithm optimization for double pipe heat exchanger PCM storage system during charging and discharging processes

Javid Zamani et al.

Summary: Nowadays, the world is facing an energy crisis, with residential buildings in developed countries accounting for a significant portion of global energy demand. To achieve sustainable energy systems, it is crucial to reduce energy consumption in this sector. The use of phase change materials (PCMs) in energy systems is identified as one of the feasible solutions. This study focuses on investigating the application of PCMs in a dual-pipe latent heat exchanger system for thermal energy storage, with the aim of optimizing the charging and discharging operations to enhance energy efficiency and minimize exergy destruction.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2023)

添加到收藏夹

Article Energy & Fuels

A comprehensive evaluation on the cycling stability of sugar alcohols for medium-temperature latent heat storage

Xue-Feng Shao et al.

Summary: This study investigated the cycling stability of four pure and three mixture sugar alcohols and evaluated their phase change behaviors and stability. It was found that the latent heats of fusion/crystallization degrade upon consecutive melting-crystallization cycles, and a higher degree of superheat leads to a faster degradation. Introducing protective nitrogen gas could suppress oxidation and improve cycling stability.

JOURNAL OF ENERGY STORAGE (2023)

添加到收藏夹

Article Thermodynamics

Enhancing PCMs thermal conductivity: A comparison among porous metal foams, nanoparticles and finned surfaces in triplex tube heat exchangers

Abolfazl NematpourKeshteli et al.

Summary: The influence of different methods on the melting process of phase change materials in a triple-tube heat exchanger was studied. The results showed that adding metal foams and nanoparticles can reduce the melting time, which is important for increasing the efficiency of latent heat thermal energy storage systems.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Experimental comparative analysis of finned-tube PCM-heat exchangers? performance

Florent Herbinger et al.

Summary: This paper presents a series of controlled experiments on a specific PCM-heat exchanger, investigating the impact of different heat exchange configurations and operating conditions on power. By determining and applying two comparative metrics, it takes the first step towards finding design theory and rules for PCM-HX.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Integration of a parabolic-trough solar field with solid-solid latent storage in an industrial process with different temperature levels

Mario Biencinto et al.

Summary: The study aims to analyze the integration of solar industrial heat with novel latent heat storage systems through a case study, demonstrating the potential of increasing the proportion of solar energy in heat supply through the use of innovative thermal storage systems.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Effects of fin parameters on performance of latent heat thermal energy storage systems: A comprehensive review

M. Eslami et al.

Summary: This paper provides a comprehensive review of various fin designs proposed for latent heat thermal energy storage systems, discussing the effects of different geometrical parameters. The study shows that an optimum number of fins, spacing, and length can be found in each case, while some parameters such as fin thickness are less important.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

添加到收藏夹

Review Energy & Fuels

A review on container geometry and orientations of phase change materials for solar thermal systems

Banumathi Munuswamy Swami Punniakodi et al.

Summary: PCM melting and solidification processes are influenced by container geometry and orientation, as well as by the addition of fins, nanoparticles, container geometry, and orientation. Operating parameters such as heat transfer fluid temperature, flow rate, and initial temperature of storage material play a dominant role in PCM melting.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

Latent thermal energy storage for solar process heat applications at medium-high temperatures - A review

Alicia Crespo et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Analysis of thermal deposition of MgCl2.6H20 hydrated salt in the sieveplate reactor for heat storage

Wei Chen et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Astronomy & Astrophysics

Storage of thermal solar energy

Benoit Stutz et al.

COMPTES RENDUS PHYSIQUE (2017)

添加到收藏夹

Article Chemistry, Physical

Thermophysical Characterization of MgCl2•6H2O, Xylitol and Erythritol as Phase Change Materials (PCM) for Latent Heat Thermal Energy Storage (LHTES)

Stephan Hoehlein et al.

MATERIALS (2017)

添加到收藏夹

Review Energy & Fuels

Thermal energy storage for low and medium temperature applications using phase change materials - A review

Jose Pereira da Cunha et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Impact of phase change materials types and positioning on hot water tank thermal performance: Using measured water demand profile

Dan Nchelatebe Nkwetta et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Phase change materials for thermal energy storage

Kinga Pielichowska et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Review Construction & Building Technology

Use of phase change materials for thermal energy storage in concrete: An overview

Tung-Chai Ling et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermal stability of phase change materials used in latent heat energy storage systems: A review

Manish K. Rathod et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

添加到收藏夹

Article Thermodynamics

One thousand thermal cycles of magnesium chloride hexahydrate as a promising PCM for indoor solar cooking

A. A. El-Sebaii et al.

ENERGY CONVERSION AND MANAGEMENT (2011)

添加到收藏夹

Article Thermodynamics

Heat transfer efficient thermal energy storage for steam generation

R. Adinberg et al.

ENERGY CONVERSION AND MANAGEMENT (2010)

添加到收藏夹

Article Thermodynamics

Fast thermal cycling of acetanilide and magnesium chloride hexahydrate for indoor solar cooking

A. A. El-Sebaii et al.

ENERGY CONVERSION AND MANAGEMENT (2009)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal energy storage with phase change materials and applications

Atul Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermal cycling test of few selected inorganic and organic phase change materials

Anant Shukla et al.

RENEWABLE ENERGY (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.