4.1 Article

An experimental and computational framework to investigate the thermal cycling approach for strengthening low SFE FeMnNi medium entropy alloy

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

On the dual-stage partial recrystallization and the corresponding mechanical response of the Cantor alloy

Wentian Chen et al.

Summary: In this study, we systematically characterized the microstructural evolution of the Cantor alloy, FeCoNiCrMn, during recrystallization at a typical mid-temperature, 700, and linked it carefully with the mechanical responses. We observed a two-stage strength-ductility variation, which has not been reported before for high-entropy alloys. This dual-stage transition may be associated with the initial inhomogeneity caused by cold-rolling and the different pathways for the evolution of such inhomogeneous microstructure during heating.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Nanoscience & Nanotechnology

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Baoqi Guo et al.

Summary: This study investigates the static recrystallization and texture development in a cold-rolled CoCrFeMnNi high entropy alloy. Evidence from quasi in-situ electron backscatter diffraction shows that the deformation texture is preserved after recrystallization but weakened. Shear bands act as preferential nucleation sites for recrystallization. In-situ observations using transmission electron microscope reveal that subgrains form through dislocation rearrangement and boundary migration, serving as viable nuclei for recrystallized grains.

SCRIPTA MATERIALIA (2022)

Article Materials Science, Multidisciplinary

Novel Alloy Design Concepts Enabling Enhanced Mechanical Properties of High Entropy Alloys

Jitesh Kumar et al.

Summary: The emergence of High Entropy Alloys (HEAs) has shifted the alloy design strategy to multi-principal elements, allowing the development of advanced materials with unique properties. With the help of high throughput experiments, computational tools, and artificial intelligence, it is possible to develop multi-principal element alloys with tailored solid solution strengthening, stacking fault energy, and microstructure.

FRONTIERS IN MATERIALS (2022)

Article Materials Science, Multidisciplinary

Critical Evaluation of Spherical Indentation Stress-Strain Protocols for the Estimation of the Yield Strengths of Steels

S. Mohan et al.

Summary: This paper critically evaluates the quantitative relationships between standard tensile tests and spherical indentation stress-strain protocols for a broad range of steels, finding that the spherical indentation protocols can accurately predict tensile yield strengths with lower error compared to conventional hardness measurements.

EXPERIMENTAL MECHANICS (2021)

Article Nanoscience & Nanotechnology

Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design

Guodong Li et al.

Summary: The harmonic structure design of high-entropy alloy samples with tunable shell fractions showed enhanced strength and ductility synergy, particularly when the shell fraction was around 70%. These samples were successfully prepared via controlled mechanical milling and subsequent sintering.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Lightweight Medium Entropy Magnesium Alloy with Exceptional Compressive Strength and Ductility Combination

Khin Sandar Tun et al.

Summary: The study successfully developed a magnesium-based medium entropy alloy with good plasticity, demonstrating improved compressive properties and plasticity in extruded alloy compared to cast alloy. The simple microstructure of the alloy contributes to enhanced mechanical properties.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Article Nanoscience & Nanotechnology

A mechanistic perspective on the kinetics of plastic deformation in FCC High Entropy Alloys: Effect of strain, strain rate and temperature

Abheepsit Raturi et al.

Summary: The plastic deformation behavior of novel high entropy alloys is determined by the strain rate sensitivity, activation volume, and strain hardening response. Further research is needed to establish theoretical understanding of solid solution strengthening and dislocation activation in 100 percent solute high entropy alloys, and to develop combined experimental and computational approaches for the mechanistic design of new FCC HEAs.

SCRIPTA MATERIALIA (2021)

Article Engineering, Mechanical

Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy

M. Schneider et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

Strengthening of an Al0.45CoCrFeNi high-entropy alloy via in situ fabricated duplex-structured composites

Jinxiong Hou et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

Heavily twinned CoCrNi medium-entropy alloy with superior strength and crack resistance

Xiaobin Feng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Nanoscience & Nanotechnology

High entropy alloys: Key issues under passionate debate

Krishanu Biswas et al.

SCRIPTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Estimating mechanical properties from spherical indentation using Bayesian approaches

Patxi Fernandez-Zelaia et al.

MATERIALS & DESIGN (2018)

Article Materials Science, Multidisciplinary

Modeling and Simulation of the Static Recrystallization of 5754 Aluminium Alloy by Cellular Automaton

Changqing Huang et al.

METALS (2018)

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

Article Nanoscience & Nanotechnology

Deciphering micro-mechanisms of plastic deformation in a novel single phase fcc-based MnFeCoNiCu high entropy alloy using crystallographic texture

Tazuddin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Review Materials Science, Multidisciplinary

Spherical nanoindentation stress-strain curves

Siddhartha Pathak et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)

Article Materials Science, Multidisciplinary

Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel

B. Ravi Kumar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Article Materials Science, Multidisciplinary

Determination of the effective zero-point and the extraction of spherical nanoindentation stress-strain curves

Surya R. Kalidindi et al.

ACTA MATERIALIA (2008)

Article Materials Science, Multidisciplinary

Microstructure prediction of the austenite recrystallization during multi-pass steel strip hot rolling: A cellular automaton modeling

Chengwu Zheng et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Article Materials Science, Multidisciplinary

Grain growth as a stochastic and curvature-driven process

Y. G. Zheng et al.

PHILOSOPHICAL MAGAZINE LETTERS (2006)

Article Physics, Applied

Modeling the accelerated cyclic annealing kinetics

Karthik Krishnan et al.

JOURNAL OF APPLIED PHYSICS (2006)

Article Nanoscience & Nanotechnology

Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials

XY Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Article Materials Science, Multidisciplinary

Computational modeling of the forward and reverse problems in instrumented sharp indentation

M Dao et al.

ACTA MATERIALIA (2001)