☆ 4.5 Article

Investigation of the performance of needle-punched nonwoven fabrics using Triumfetta cordifolia and thermoplastic fibers, compared to other commercial bast fibers used in preformed biosourced composites

HELIYON (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Effect of stacking sequence on mechanical, water absorption, and biodegradable properties of novel hybrid composites for structural applications

Tamilselvan Manickam et al.

Summary: This study fabricated tri-layer hybrid composites using snake grass fiber and jute fiber. The mechanical characterization showed that the J/S/J composite had the highest tensile and flexural strength, while the S/J/S composite had better impact strength. Water absorption studies revealed that the S/J/S composite absorbed more moisture. Additionally, the S/J/S composite exhibited greater biodegradability.

INTERNATIONAL POLYMER PROCESSING (2023)

添加到收藏夹

Article Materials Science, Composites

Manufacture and Characterization of Cola Lepidota Reinforcements for Composite Applications

Remy Legrand Ndoumou et al.

Summary: This study presents the first works on manufacturing reinforcements for composite applications using a tropical fiber extracted from the bast of the Cola Lepidota (CL) plant. Different products, including yarns and fabrics, were produced and characterized for their textile and mechanical properties. The results showed that CL yarns have higher tenacity compared to similar products based on flax fibers, and the quasi-unidirectional fabric architecture exhibited promising tensile properties. The study also demonstrated that composites based on CL fibers achieved comparable tensile properties to those based on natural fibers.

JOURNAL OF COMPOSITES SCIENCE (2023)

添加到收藏夹

Article Agricultural Engineering

Exploiting synchrotron X-ray tomography for a novel insight into flax-fibre defects ultrastructure

Delphine Quereilhac et al.

Summary: Flax fibres are valuable reinforcements for composites, but defects called kink-bands might affect their properties. This study investigates the pores within the kink-band using X-ray microtomography, revealing their organization and correlation with the fiber's ultrastructure. Local increase in porosity was found in severe defect zones along the fiber.

INDUSTRIAL CROPS AND PRODUCTS (2023)

添加到收藏夹

Article Materials Science, Textiles

Physico-Chemical and Mechanical Characterization of Triumfetta Pentandra Bast Fiber from the Equatorial Region of Cameroon as a Potential Reinforcement of Polymer Composites

Azemafac Desmond Nkapleweh et al.

Summary: This study characterized Triumfetta Pentandra (TP) bast fibers from Cameroon and found that these fibers have the potential to be used as a strengthening agent in polymer composites due to their composition and mechanical properties.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Economics

How can current German and EU policies be improved to enhance the reduction of CO2 emissions of road transport? Revising policies on electric vehicles informed by stakeholder and technical assessments

Leopold Peiseler et al.

Summary: This paper analyzes the shortcomings of electric vehicle policies in the EU and Germany and proposes improvement measures. Through interviews with stakeholders, it is found that differentiating between different types of electric vehicles and reforming the existing taxation system are the most promising and likely to be adopted measures to reduce emissions.

ENERGY POLICY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigation on jute/snake grass/kenaf fiber reinforced novel hybrid composites with annona reticulata seed filler addition

R. Prem Kumar et al.

Summary: This study investigated the mechanical properties and wear behavior of natural fiber reinforced hybrid composites with varying fiber volumes and the use of Annona reticulata seed powder as a filler material. The results showed that the sample with an equal proportion of snake grass and kenaf fibers (12.5% each) without filler exhibited excellent mechanical strengths. Additionally, the sample with 5% filler demonstrated a lower wear rate compared to the other samples.

MATERIALS RESEARCH EXPRESS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

A needle-punched nonwoven experiment using cotton and polyester scraps to wrap preserved fruit

Sujira Khojitmate et al.

Summary: This study investigates the use of cotton and polyester scraps to produce nonwoven fabrics for packaging to preserve fruit. Perforated cotton was found to be the best option for preserving Kimju guava and tomatoes.

HELIYON (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of the Fibre Orientation Distribution on the Mechanical and Preforming Behaviour of Nonwoven Preform Made of Recycled Carbon Fibres

Jean Ivars et al.

Summary: This paper evaluates the mechanical and preforming behavior of a nonwoven material used for recycling carbon fiber, and finds that fiber orientation has a significant impact on both forming and tensile behavior. The tensile behavior of the nonwoven material is influenced by inter-fiber cohesion, with low cohesion leading to poor resistance to tearing. Increasing the number of layers in the nonwoven material reduces the impact of nonwoven anisotropy behavior under compaction load.

FIBERS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Damping analysis of nonwoven natural fibre-reinforced polypropylene composites used in automotive interior parts

Hajer Hadiji et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Textiles

Mechanical behavior of flax/polypropylene commingled nonwoven at dry scale: Influence of process parameters

Imen Gnaba et al.

TEXTILE RESEARCH JOURNAL (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Understanding the effect of moisture variation on the hygromechanical properties of porosity-controlled nonwoven biocomposites

Victor Gager et al.

POLYMER TESTING (2019)

添加到收藏夹

Review Engineering, Manufacturing

Specific features of flax fibres used to manufacture composite materials

Christophe Baley et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physico-Mechanical, Thermal and Biodegradation Performance of Random Flax/Polylactic Acid and Unidirectional Flax/Polylactic Acid Biocomposites

Mahmudul Akonda et al.

FIBERS (2018)

添加到收藏夹

Article Materials Science, Paper & Wood

Triumfetta cordifolia: A Valuable (African) Source for Biocomposites

Peter Grosser et al.

BIORESOURCES (2018)

添加到收藏夹

Article Polymer Science

Exploring two innovative recycling ways for poly-(propylene)-flax non wovens wastes

Nicolas Renouard et al.

POLYMER DEGRADATION AND STABILITY (2017)

添加到收藏夹

Review Thermodynamics

Fuel consumption and CO2 emissions from passenger cars in Europe Laboratory versus real-world emissions

Georgios Fontaras et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Analysis of the deformability of flax-fibre nonwoven fabrics during manufacturing

Fatma Omrani et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Paper & Wood

Almost Forgotten Resources – Biomechanical Properties of Traditionally Used Bast Fibers from Northern Angola

Christian Senwitz et al.

BioResources (2016)

添加到收藏夹

Article Agricultural Engineering

Evaluation of the potential of three non-woven flax fiber reinforcements: Spunlaced, needlepunched and paper process mats

Nicolas Martin et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical and acoustic behaviour of porosity controlled randomly dispersed flax/PP biocomposite

Justin Merotte et al.

POLYMER TESTING (2016)

添加到收藏夹

Article Materials Science, Textiles

A Review of Flax Nonwovens: Manufacturing, Properties, and Applications

Subhankar Maity et al.

JOURNAL OF NATURAL FIBERS (2014)

添加到收藏夹

Article Engineering, Environmental

Preliminary Study of Non-woven Composite: Effect of Needle Punching and Kenaf Fiber Loadings on Non-woven Thermoplastic Composites Prepared From Kenaf and Polypropylene Fiber

H. D. Rozman et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2013)

添加到收藏夹

Article Materials Science, Composites

Nonwoven Polylactic Acid and Flax Biocomposites

Shah Alimuzzaman et al.

POLYMER COMPOSITES (2013)

添加到收藏夹

Article Materials Science, Composites

Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites

Igor Maria De Rosa et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Textiles

Development of Natural Fiber Nonwovens for Application as Car Interiors for Noise Control

G. Thilagavathi et al.

JOURNAL OF INDUSTRIAL TEXTILES (2010)

添加到收藏夹

Article Materials Science, Composites

Bio-composites of kenaf fibers in polylactide: Role of improved interfacial adhesion in the carding process

Byoung-Ho Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Textiles

An experimental study of the needled nonwoven process - Part III: Fiber damage due to needling

MH Miao et al.

TEXTILE RESEARCH JOURNAL (2004)

添加到收藏夹

Article Materials Science, Textiles

Thermoformable automotive composites containing kenaf and other cellulosic fibers

DV Parikh et al.

TEXTILE RESEARCH JOURNAL (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.