4.5 Review

An introductory review on advanced multifunctional materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

MOFTextile: Metal-organic frameworks nanosheets incorporated cotton textile for selective vapochromic sensing and capture of pyridine

Hani Nasser Abdelhamid

Summary: Metal-organic frameworks (MOFs) have shown great potential for industrial applications but current synthesis processes limit their use due to the powder form. A solvothermal method was used to grow copper-based MOFs onto a cotton textile, creating a material called CuBDC@Textile. CuBDC@Textile demonstrated excellent vapor sensing properties and high adsorption capacity for pyridine. This dual-functional material holds promise for further research on MOFs in textile applications.

APPLIED ORGANOMETALLIC CHEMISTRY (2023)

Article Materials Science, Ceramics

ZnO-based nanocomposites for hydrogen generation via hydrolysis of Borohydride

Numa A. A. Althubiti et al.

Summary: The use of solid-state materials such as sodium borohydride for hydrogen storage and release can meet the requirements of the "Hydrogen Economy". This study investigated ZnO-based materials as catalysts for hydrogen release through the hydrolysis of NaBH4. The synthesis method produced nanocomposites consisting of ZnO-xTiO(2) and ZnO-xCeO(2) (x = 5 wt.% or 10 wt.%). Characterization techniques confirmed the phase purity and optical properties of the materials. The materials exhibited a high hydrogen generation rate and different activation energies.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2023)

Article Multidisciplinary Sciences

Repair of critical-sized bone defects in rabbit femurs using graphitic carbon nitride (g-C3N4) and graphene oxide (GO) nanomaterials

Ahmed Abdelrahiem Sadek et al.

Summary: The study investigated the regenerative capacity of g-C3N4 and GO nanomaterials to stimulate critical-sized bone defect regeneration. It was found that both materials promoted bone cell growth and osteogenesis, demonstrating their potential for bone defect treatment.

SCIENTIFIC REPORTS (2023)

Article Chemistry, Applied

Antifungal and Nanozyme Activities of Metal-Organic Framework-derived CuO@C

Hani Nasser Abdelhamid et al.

Summary: In this study, copper-based metal-organic frameworks (MOFs) were used to synthesize copper oxide (CuO) embedded into carbon (CuO@C), which displayed high antifungal activity against four economic postharvest plant pathogens. The CuO@C nanoparticles inhibited the growth of the fungal species and decreased their enzyme activity, reducing the potentiality of fruit disease. The successful formation of CuO@C nanoparticles was confirmed using various characterization techniques.

APPLIED ORGANOMETALLIC CHEMISTRY (2023)

Article Chemistry, Inorganic & Nuclear

Dye encapsulation and one-pot synthesis of microporous-mesoporous zeolitic imidazolate frameworks for CO2 sorption and adenosine triphosphate biosensing

Hani Nasser Abdelhamid

Summary: One-pot co-precipitation method for synthesizing microporous-mesoporous zeolitic imidazolate frameworks-8 (ZIF-8) crystals, using organic dyes as target molecules, was reported. The crystal growth involves an intermediate phase of zinc hydroxyl nitrate nanosheets, allowing the adsorption of the dyes. The materials showed potential for CO2 adsorption and ATP biosensing.

DALTON TRANSACTIONS (2023)

Article Engineering, Environmental

Binder-free Three-dimensional (3D) printing of Cellulose-ZIF8 (CelloZIF-8) for water treatment and carbon dioxide (CO2) adsorption

Hani Nasser Abdelhamid et al.

Summary: This study developed a method for 3D printing of cellulose-metal organic frameworks (CelloMOFs), which exhibited high loading capacity and good adsorption performance. These materials can efficiently remove carbon dioxide, dyes, and heavy metal ions, as well as act as catalysts for water pollutant degradation.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Inorganic & Nuclear

3D printing of cellulose/leaf-like zeolitic imidazolate frameworks (CelloZIF-L) for adsorption of carbon dioxide (CO2) and heavy metal ions

Hani Nasser Abdelhamid et al.

Summary: 3D printing of cellulose/leaf-like zeolitic imidazolate frameworks (CelloZIF-L) allows for the creation of structures with high adsorption efficiency, capable of adsorbing carbon dioxide and heavy metals.

DALTON TRANSACTIONS (2023)

Review Chemistry, Applied

Bacterial cellulose-based biomaterials: From fabrication to application

Chuntao Chen et al.

Summary: This article provides a review of the research advancement and applications of BC-based biomaterials in the field of biomedicine. It includes the modifications and generation of BC-based composites using nanotechnology. The preparation methods and potential applications of these materials are summarized and discussed in detail, with a focus on important factors such as degradation and pore structure characteristic. Furthermore, the challenges and potential advances in future development are also discussed.

CARBOHYDRATE POLYMERS (2022)

Review Chemistry, Multidisciplinary

Magnetic Soft Materials and Robots

Yoonho Kim et al.

Summary: This review discusses recent progress in the design and fabrication, modeling and simulation, and actuation and control of magnetic soft materials and robots. Design guidelines for optimal actuation performance are provided, as well as potential biomedical applications and perspectives on next-generation magnetic soft robots.

CHEMICAL REVIEWS (2022)

Review Chemistry, Inorganic & Nuclear

Cellulose-metal organic frameworks (CelloMOFs) hybrid materials and their multifaceted Applications: A review

Hani Nasser Abdelhamid et al.

Summary: Cellulose-MOFs (CelloMOFs) are hybrid materials that combine cellulosic materials with metal-organic frameworks, offering a range of properties for applications in water remediation, air purification, gas storage, sensing/biosensing, and biomedicine. Their potential includes efficient adsorption for removing contaminants in water, catalytic applications for organic pollutants, air purification by removing greenhouse gases, and biomedical applications such as antibacterial and drug delivery. This review provides a synthesis, characterization, and overview of the applications of CelloMOFs materials, highlighting challenges and future prospects for researchers and scientists.

COORDINATION CHEMISTRY REVIEWS (2022)

Article Engineering, Chemical

Redox-active metal-organic frameworks for the removal of contaminants of emerging concern

Chizoba I. I. Ezugwu et al.

Summary: The pollution caused by contaminants of emerging concern (CECs) is a significant problem that poses a serious threat to human health and ecosystem functions. Metal-organic frameworks (MOFs) have emerged as a potential candidate for water and wastewater treatment. This review explores the application of MOFs for the removal of CECs, focusing on their redox-active properties and their use in advanced oxidation processes. The study also discusses the photocatalytic use of MOFs for removing dissolved emerging pollutants and provides an overview of future research directions.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Review Chemistry, Applied

Cellulose nanocrystals: Fundamentals and biomedical applications

Prajakta Mali et al.

Summary: Cellulose nanocrystals, a type of bio-based nanomaterial, have garnered attention for their excellent properties and diverse applications. Research has shown their potential in various biomedical applications due to their high strength, surface area, and rigidity.

CARBOHYDRATE POLYMERS (2022)

Review Chemistry, Applied

Removal of carbon dioxide using zeolitic imidazolate frameworks: Adsorption and conversion via catalysis

Hani Nasser Abdelhamid

Summary: In this article, the authors review the application of ZIF-based materials for CO2 removal via adsorption and catalysis. Various reaction types and recent membrane technologies are highlighted. The prospects for industrial applications and commercialization of ZIF-based materials are also briefly discussed.

APPLIED ORGANOMETALLIC CHEMISTRY (2022)

Review Biochemistry & Molecular Biology

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

Hani Nasser Abdelhamid et al.

Summary: This article reviews the applications of cellulose in the field of biomedicine, including antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. Cellulose-based materials possess customizable chemical, mechanical, and physical properties, making them suitable for biomedical applications.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Review Multidisciplinary Sciences

Progress and prospects in magnetic topological materials

B. Andrei Bernevig et al.

Summary: Magnetic topological materials have unique properties influenced by the topology of their electronic wave functions and magnetic spin configuration. In this review, we summarize the theoretical and experimental progress in this field and provide an outlook for future research.

NATURE (2022)

Article Veterinary Sciences

Enhancement of critical-sized bone defect regeneration using UiO-66 nanomaterial in rabbit femurs

Ahmed Abdelrahiem Sadek et al.

Summary: The UiO-66 nanomaterial demonstrates excellent cytocompatibility and stimulates osteoblast functions, indicating its potential as a biomaterial for bone tissue engineering. In vivo experiments show enhanced osteogenesis and healing of bone defects, making UiO-66 a promising candidate for bone repair.

BMC VETERINARY RESEARCH (2022)

Review Energy & Fuels

Metal-organic frameworks as heterogeneous catalysts for the chemical conversion of carbon dioxide

Tapan K. Pal et al.

Summary: Gaseous CO2 has attractive properties as a C1 chemical source, but its high concentration in the atmosphere leads to global warming. Fixation of CO2 is important for both environmental concerns and production of valuable chemicals. Metal organic frameworks (MOFs) have shown excellent catalytic performance for CO2 fixation.
Article Chemistry, Applied

Palladium nanocrystals-embedded covalent organic framework as an efficient catalyst for Heck cross-coupling reaction

Ahmed R. Abdellah et al.

Summary: In this study, COFs synthesized via the solvothermal method were used as supports for in-situ growth of Pd NCs, resulting in catalysts with small particle sizes. The materials were characterized using various techniques, and the Pd NCs@COFs exhibited excellent catalytic performance and stability in C-C formation reactions.

MICROPOROUS AND MESOPOROUS MATERIALS (2022)

Article Energy & Fuels

Metal-organic frameworks (MOFs)-derived Co3O4@N-doped carbon as an electrode materials for supercapacitor

Sherief A. Al Kiey et al.

Summary: Co3O4@N-doped C composites were synthesized by pyrolysis of cobalt-based metal-organic frameworks (MOF). The hierarchical porous structure of zeolitic imidazolate frameworks (ZIF-67) was utilized to enhance electron and ion transport, resulting in improved capacitive performance.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

Covalent organic frameworks (COFs)-derived nitrogen-doped carbon/reduced graphene oxide nanocomposite as electrodes materials for supercapacitors

Mervat Ibrahim et al.

Summary: This study presents a method for the synthesis of a triazine covalent organic framework/graphene oxide nanocomposite, which is used to synthesize N-doped carbon/reduced graphene oxide. The in-situ synthesized N-doped carbon/reduced graphene oxide shows superior electrochemical performance and is employed as electrode materials for supercapacitors.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Physical

High-Performance Lithium-Ion Battery and Supercapacitors Using Covalent Organic Frameworks (COFs)/Graphitic Carbon Nitride (g-C3N4)-Derived Hierarchical N-Doped Carbon

Mervat Ibrahim et al.

Summary: This study introduces a method for synthesizing covalent organic frameworks/graphitic carbon nitride nanocomposites and preparing nitrogen-doped carbon and nitrogen-doped carbon/g-C3N4 materials through carbonization reaction. These materials can be used for supercapacitors and lithium-ion batteries, exhibiting high specific capacitance and good energy. The asymmetric supercapacitor device shows high energy and power, and the nitrogen-doped carbon/g-C3N4 electrode also demonstrates high discharge capacity.

ACS APPLIED ENERGY MATERIALS (2022)

Article Engineering, Environmental

ZIF-67 and Cobalt-based@heteroatom-doped carbon nanomaterials for hydrogen production and dyes removal via adsorption and catalytic degradation

Ayat Badry Aly Abdellatif et al.

Summary: This study reported a method of encapsulating thiourea and D-Glucose-6 -phosphate disodium salt dihydrate into zeolitic imidazolate frameworks, and tested their potential applications as catalysts in hydrogen generation and degradation of organic dyes.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Multidisciplinary Sciences

A comparative study of the toxic effect of ZIF-8 and ZIF-L on the colonization and decomposition of shaded outdoor mice carrions by arthropods

Fatma El-Zahraa A. Abd El-Aziz et al.

Summary: This study examined the toxic effect of two Zinc-based metal-organic frameworks (MOFs) on carrions and arthropods found in decomposing carrions. The results showed an increase in zinc content over time. This research provides important biological information that could contribute to understanding the environmental impact of MOF materials' toxic levels.

SCIENTIFIC REPORTS (2022)

Article Engineering, Environmental

Magnetic metal-organic frameworks for efficient removal of cadmium(II), and lead(II) from aqueous solution

Ahmed F. Abdel-Magied et al.

Summary: The study synthesized two magnetic metal-organic frameworks and investigated their adsorption capacities for Cd(II) and Pb(II). The adsorption efficiency is strongly dependent on the pH of the solution, and the process follows a pseudo-second-order model and fits the Langmuir isotherm model.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Hierarchical porous zeolitic imidazolate frameworks (ZIF-8) and ZnO@N-doped carbon for selective adsorption and photocatalytic degradation of organic pollutants

Ahmed I. A. Soliman et al.

Summary: This study reports the use of zeolitic imidazolate framework-8 (ZIF-8) and ZnO@N-doped C as effective adsorbents and photocatalysts for the removal of organic dyes from water. ZnO@N-doped C shows high degradation efficiency under UV exposure.

RSC ADVANCES (2022)

Article Chemistry, Multidisciplinary

Recent Advances on Metal-Organic Frameworks in the Conversion of Carbon Dioxide

Xiongli Liu et al.

Summary: With the challenges of global warming due to greenhouse gas emissions, the use of Metal-Organic Frameworks (MOFs) in converting CO2 to useful compounds shows promising potential. The high surface areas and easily designable functional sites make MOFs a hopeful solution for addressing the greenhouse effect.

CHINESE JOURNAL OF CHEMISTRY (2021)

Review Engineering, Biomedical

Eco-friendly nanocellulose and its biomedical applications: current status and future prospect

Poonam Nehra et al.

Summary: Nanocellulose, as a new generation material, shows great potential in the biomedical field, especially in areas such as healthcare and food industry. Cellulose-based products play important roles in applications like wound healing, drug delivery, and antimicrobial materials.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2021)

Article Dermatology

Bacterial Cellulose: Functional Modification and Wound Healing Applications

Wei He et al.

Summary: Bacterial cellulose (BC) is a natural polymer with good biological activity and unique physical, chemical, and biological properties, suitable for wound dressings. Different methods have been adopted to modify BC for optimizing its biocompatibility and antimicrobial activity, promoting wound healing. BC-based dressings have been applied in various types of wounds with remarkable therapeutic effects.

ADVANCES IN WOUND CARE (2021)

Article Nanoscience & Nanotechnology

Photodynamic Coatings on Polymer Microfibers for Pathogen Inactivation: Effects of Application Method and Composition

Bharadwaja S. T. Peddinti et al.

Summary: The increased risk of hospital-acquired infections has impacted the global healthcare industry, particularly with the rising threat of antibiotic-resistant pathogens. This study developed polymer microfibers coated with a porphyrin photosensitizer to effectively inactivate pathogenic bacteria like Staphylococcus aureus and antibiotic-resistant Escherichia coli, as well as a human common cold coronavirus.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Applied

In-situ growth of zeolitic imidazolate frameworks into a cellulosic filter paper for the reduction of 4-nitrophenol

Hani Nasser Abdelhamid et al.

Summary: Zeolitic imidazolate frameworks (ZIFs) ZIF-8 and ZIF-67 were successfully synthesized on Whatman (R) cellulosic filter paper, demonstrating potential for water treatment applications and new exploration of hybrid materials combining cellulose and ZIFs.

CARBOHYDRATE POLYMERS (2021)

Article Engineering, Environmental

Cellulose-zeolitic imidazolate frameworks (CelloZIFs) for multifunctional environmental remediation: Adsorption and catalytic degradation

Hani Nasser Abdelhamid et al.

Summary: Crystal growth of zeolitic imidazolate frameworks (ZIFs) on biopolymers such as cellulose offers a promising method for obtaining hybrid materials combining natural and synthetic components. By using TEMPO-mediated oxidized nanocellulose (TOCNF) derived from cellulose, the crystal growth of CelloZIF-8 and CelloZIF-L was modulated. These materials demonstrated high selectivity and efficiency in adsorbing CO2, metal ions, and anionic dyes such as methyl blue (MeB), as well as serving as catalysts for dye degradation. The materials can be recycled multiple times without significant loss of performance, and their adsorption and catalysis mechanisms were investigated.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Multidisciplinary

Recent Strategies to Develop Innovative Photosensitizers for Enhanced Photodynamic Therapy

Thanh Chung Pham et al.

Summary: This review presents a robust strategy for designing photosensitizers for different species, highlighting the importance of organic PSs in photodynamic therapy. While previous studies have focused on nanomaterials and traditional PSs, this review sets out to report recent innovative strategies for developing organic photosensitizers for enhanced PDT, providing detailed examples to offer intuitive and specific insights to readers.

CHEMICAL REVIEWS (2021)

Article Biochemistry & Molecular Biology

Potential applications of bacterial cellulose and its composites for cancer treatment

Salman Ul Islam et al.

Summary: Bacterial cellulose (BC) is a promising material in the medical field, particularly for cancer treatment, due to its unique physical, mechanical, and biological features. Its use in developing composites has expanded its applications, with recent focus on 3D printing techniques for treating different cancers.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Review Chemistry, Physical

A review on hydrogen generation from the hydrolysis of sodium borohydride

Hani Nasser Abdelhamid

Summary: This paper discusses the potential of hydrogen as an alternative energy source, as well as the research progress and challenges related to the hydrolysis of sodium borohydride for hydrogen production. The hydrolysis reaction of aqueous NaBH4 is influenced by key parameters, and hydrogen production techniques require further investigation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Materials Science, Multidisciplinary

Ultra-fast covalent molecular printing on cellulose paper by photo-strain-triggered click ligation: UV LED versus laser irradiations

Marie Denis et al.

Summary: Cyclopropenone derivatives are used as latent photo-released strained cyclic alkynes for covalent printing complex patterns on cellulose paper. The use of a simple UV LED allows quick printing at room temperature with good resolution at the micrometer scale and minimal diffusion. The strategy is proven effective through the sequential printing of a QR code and logo on the same paper sheet.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Materials Science, Biomaterials

Porous protoporphyrin IX-embedded cellulose diacetate electrospun microfibers in antimicrobial photodynamic inactivation

Tingting Wang et al.

Summary: The study developed a photodynamic antimicrobial membrane by embedding a photosensitizer into electrospun cellulose diacetate microfibers, achieving high inactivation efficiency against S. aureus and E. coli. The membrane can generate singlet oxygen under visible light illumination and further enhance its antimicrobial efficacy by increasing the addition of potassium iodide.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Article Dermatology

Nanocellulose-based wound dressing for conservative wound management in children with second-degree burns

Annika Resch et al.

Summary: The use of nanocellulose-based dressing in treating burn wounds in children can achieve complete re-epithelialisation in a short period of time, reduce the frequency of dressing changes, and provide a more flexible and acceptable treatment option for patients and their parents.

INTERNATIONAL WOUND JOURNAL (2021)

Article Engineering, Chemical

Influence of Temperature on Cobalt Hydroxide Precipitation for Recovery from Battery Leachates

Neila Djoudi et al.

Summary: Cobalt recovery from Li-ion batteries by precipitation method shows promising results, with optimal conditions at 25 degrees C yielding nearly 100% recovery. Careful temperature selection is necessary to avoid co-precipitation with manganese. This research provides a better understanding of cobalt hydroxide precipitation for complete recovery.

CHEMICAL ENGINEERING & TECHNOLOGY (2021)

Review Chemistry, Analytical

Carbon dots for virus detection and therapy

Jan Belza et al.

Summary: This article discusses the potential of carbon dots in virus detection and antiviral therapy, as well as how their biosensing and antiviral properties can be adjusted. It also summarizes current methods of using carbon dots for virus detection and antiviral treatment, and shares research results on different types of viruses including SARS-CoV-2.

MICROCHIMICA ACTA (2021)

Review Engineering, Biomedical

A review of functionalised bacterial cellulose for targeted biomedical fields

Yunus Emre Oz et al.

Summary: Bacterial cellulose is an ideal biomaterial for tissue engineering and drug delivery systems, with properties such as high purity, biocompatibility, and high mechanical strength. By tuning its properties and incorporating compounds, it can be customized for various biomedical applications.

JOURNAL OF BIOMATERIALS APPLICATIONS (2021)

Article Reproductive Biology

Antimicrobial activity of silver-carbon nanoparticles on the bacterial flora of bull semen

M. S. Yousef et al.

Summary: Silver-carbon nanoparticles (Ag@C NPs) were successfully synthesized as an alternative antibiotic agent for bull semen extender, demonstrating efficient antimicrobial activity and significant spermicidal effects against bacteria in fresh semen samples.

THERIOGENOLOGY (2021)

Article Chemistry, Applied

Enhanced crystallinity and thermal properties of cellulose from rice husk using acid hydrolysis treatment

Halimatun Saadiah Hafid et al.

Summary: Cellulose was extracted from rice husk using an integrated delignification process involving alkaline treatment and acid hydrolysis. HNO3 treatment increased cellulose content and crystallinity, with slightly improved thermal properties. Economic analysis showed chlorine extraction yielded higher cellulose recovery but lower total operation costs compared to HNO3.

CARBOHYDRATE POLYMERS (2021)

Article Chemistry, Inorganic & Nuclear

Dehydrogenation of sodium borohydride using cobalt embedded zeolitic imidazolate frameworks

Hani Nasser Abdelhamid

Summary: Hydrogen has gained attention as an environmentally friendly alternative energy source, with cobalt embedded zeolitic imidazolate frameworks (Co@ZIF-8) showing high catalytic activity and a hierarchical porous structure for chemical synthesis and hydrogen generation applications.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Chemistry, Analytical

Intrinsic catalase-mimicking MOFzyme for sensitive detection of hydrogen peroxide and ferric ions

Hani Nasser Abdelhamid et al.

Summary: Lanthanide metal-organic frameworks exhibit excellent properties, such as high thermal stability and promising enzyme-mimic activity. A new cerium MOFs synthesized via a solvothermal method showed good thermal stability and fluorescence emission signal at a wavelength of 550 nm. It demonstrated peroxidase MOFzyme activity and could detect hydrogen peroxide and ferric ions with good sensitivity and a wide linear range.

MICROCHEMICAL JOURNAL (2021)

Article Chemistry, Multidisciplinary

Heterogeneous Metal Azolate Framework-6 (MAF-6) Catalysts with High Zinc Density for Enhanced Polyethylene Terephthalate (PET) Conversion

Ren-Xuan Yang et al.

Summary: This study demonstrates an effective process to chemically convert PET to BHET using metal azolate framework-6 (MAF-6) as a catalyst, achieving high conversion and yield. The use of MAF-6 opens a new route for postconsumer recycling of PET with remarkable practicality.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Review Chemistry, Multidisciplinary

Chemical Fixation of Carbon Dioxide by Heterogeneous Porous Catalysts

Ipsita Hazra Chowdhury et al.

Summary: The review discussed the significant developments and future research directions of major porous heterogeneous catalysts in carbon dioxide capture and conversion, highlighting their physiochemical properties and efficiency for CO2 capture and conversion.

CHEMNANOMAT (2021)

Article Nanoscience & Nanotechnology

Fabrication of Bacterial Cellulose-Based Dressings for Promoting Infected Wound Healing

Fazli Wahid et al.

Summary: The study showed that BC membranes functionalized with epsilon-polylysine (epsilon-PL) and mussel-inspired polydopamine (PDA) exhibited strong antibacterial properties, potential for promoting infected wound healing, and enhanced thickness and smoothness of newborn skin.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Nanocellulose-Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage

Pengfei Lv et al.

Summary: Nanocellulose has attracted extensive research attention due to its renewable, carbon-neutral nature, superior biocompatibility, tailorable surface chemistry, and optical and mechanical properties. Recent advancements in nanocellulose-derived functional materials and their applications in areas such as chiral photonics, soft actuators, energy storage, and biomedical science have been highlighted in this review. Discussion on the design and synthesis strategies, unique properties, underlying mechanisms, and potential applications of nanocellulose-based functional materials provides insights for the rapid development of interdisciplinary fields.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Applied

Zeolitic imidazolate frameworks (ZIF-8, ZIF-67, and ZIF-L) for hydrogen production

Hani Nasser Abdelhamid

Summary: Hydride materials show good performance for hydrogen storage and release, with the addition of benzoic acid and hexamethylenetetramine modulating the synthesis of porous metal organic frameworks. The materials prepared exhibit increased hydrolysis rate of sodium borohydride, with ZIF-8 and ZIF-67 prepared using benzoic acid showing high catalytic performance in terms of efficiency and reaction time.

APPLIED ORGANOMETALLIC CHEMISTRY (2021)

Article Biochemistry & Molecular Biology

Characterization and Antibacterial Properties of Autoclaved Carboxylated Wood Nanocellulose

Gary Chinga-Carrasco et al.

Summary: Chemical pretreatment and autoclaving altered the characteristics of cellulose nanofibrils (CNFs). In vitro tests revealed the potential application of CNFs in cytotoxicity evaluation and skin irritation assessment.

BIOMACROMOLECULES (2021)

Review Chemistry, Applied

Seaweed-based cellulose: Applications, and future perspectives

Ravi S. Baghel et al.

Summary: This review summarizes and discusses cellulose extracted from various types of seaweeds, including content, extraction strategies, and cellulose-based products. Some seaweed species were found to have significant cellulose content (9-34% dry weight), and the properties of seaweed cellulose-based products were comparable to products prepared from plant-based cellulose.

CARBOHYDRATE POLYMERS (2021)

Article Chemistry, Applied

All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes

Dimitrios Georgouvelas et al.

Summary: A simple method for manufacturing all-cellulose layered membranes with high adsorption and catalytic properties for metal ions and organic dyes has been developed in this study, with a significant increase in hydrogenation efficiency for dyes achieved in the presence of membranes compared to NaBH4 alone. The membranes show great potential for water purification systems due to their water-based processing, abundance of component materials, and multifunctional characteristics.

CARBOHYDRATE POLYMERS (2021)

Article Materials Science, Paper & Wood

Preparation of antibacterial ZnO NP-containing schizophyllan/bacterial cellulose nanocomposite for wound dressing

Sepideh Hamedi et al.

Summary: Nanocomposite hydrogel plays a crucial role in wound healing, with the addition of ZnO nanoparticles and functionalization of bacterial cellulose enhancing its properties and antibacterial effects. It can also stimulate the proliferation of human fibroblast cells.

CELLULOSE (2021)

Review Biochemistry & Molecular Biology

Zeolitic Imidazolate Frameworks (ZIF-8) for Biomedical Applications: A Review

Hani Nasser Abdelhamid

Summary: ZIF-8 is not only an excellent protective material for bioentities, but also has advanced applications in biomedicine, including cancer therapy, antimicrobial, biosensing, and biocatalysis. Its bioinspired design enhances the material's performance in biomedical applications, offering high biomineralization capability and superior biological activity for efficient drug delivery and selectivity.

CURRENT MEDICINAL CHEMISTRY (2021)

Article Energy & Fuels

Solid Acid Zirconium Oxo Sulfate/Carbon-Derived UiO-66 for Hydrogen Production

Hani Nasser Abdelhamid

Summary: This study utilized sulfuric acid-assisted carbonization of Zr-based metal-organic frameworks to produce ZrOSO4/C, which catalyzed the hydrolysis of NaBH4 and resulted in a high hydrogen generation rate. The acidity of ZrOSO4/C played a crucial role in the material's catalytic performance towards hydrogen gas release using hydrides.

ENERGY & FUELS (2021)

Review Biochemistry & Molecular Biology

State-of-art review on preparation, surface functionalization and biomedical applications of cellulose nanocrystals-based materials

Wei Long et al.

Summary: This review summarizes the recent advances and development on the preparation, surface functionalization, and biomedical applications of cellulose nanocrystals (CNCs) based materials, emphasizing their potential in tissue engineering, medical hydrogels, biosensors, fluorescent imaging, and intracellular delivery of biological agents. Current issues and future directions in these aspects are also highlighted, aiming to attract attention from scientists in materials, chemistry, biomedicine, and other disciplines.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Veterinary Sciences

Graphene oxide-cellulose nanocomposite accelerates skin wound healing

Mahmoud Soliman et al.

Summary: The study evaluated the impact of using graphene oxide (GO)-cellulose nanocomposite on skin wound healing through in vitro and in vivo investigations. The nanomaterial showed excellent cytocompatibility, enhanced cell migration, and promoted wound healing in rat skin wounds, suggesting its promising potential application in tissue regeneration.

RESEARCH IN VETERINARY SCIENCE (2021)

Article Chemistry, Multidisciplinary

Modified Hairy Nanocrystalline Cellulose as Photobactericidal Nanofillers for Food Packaging Application

Roya Koshani et al.

Summary: A novel nanofiller, photobactericidal hairy nanocrystalline cellulose, was developed for self-disinfecting food packaging by covalently linking rose bengal to a functionalized version called hairy aminated nanocrystalline cellulose. The antibacterial effect of the resulting conjugate was evaluated against foodborne pathogens, demonstrating high efficacy in inactivating them under light irradiation. The antimicrobial activity was attributed to a combination of photodynamically generated reactive oxygen species by rose bengal and electrostatically induced cell wall disruption by cationic ANCC.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

The influence of piezoelectric effect on the heterogeneous photocatalytic hydrogen production of strontium titanate nanoparticles

Yawei Jiang et al.

Summary: The study examined the influence of piezoelectric effect on the photocatalytic hydrogen production of STO nanoparticles, showing that ultrasound cavitation can inhibit the migration of photo-generated carriers. This finding suggests that combining ultrasound with photocatalysis can significantly impact the efficiency of hydrogen production.

NANO ENERGY (2021)

Review Chemistry, Multidisciplinary

From Residues to Added-Value Bacterial Biopolymers as Nanomaterials for Biomedical Applications

Francisco G. Blanco et al.

Summary: Bacterial biopolymers are naturally occurring materials that can be produced from renewable sources and have diverse chemical structures. They have gained substantial interest in the biomedical field, particularly bacterial cellulose, polyhydroxyalkanoates, and gamma-polyglutamic acid, which are suitable for nanoscale biomedical applications due to their versatility and unique properties. Their production processes can be sustainable and their properties can be further enhanced for biomedical nanomaterial applications through chemical and biotechnological approaches.

NANOMATERIALS (2021)

Review Chemistry, Multidisciplinary

Preparation and Surface Functionalization of Carboxylated Cellulose Nanocrystals

Edmond Lam et al.

Summary: Cellulose nanocrystals (CNCs), including sulfated cellulose nanocrystals (sCNCs) and carboxylated cellulose nanocrystals (cCNCs), have unique functional properties such as high crystallinity, colloidal stability, and uniform nanoscale dimensions. cCNCs show potential advantages in commercialization activities and industrial applications compared to sCNCs, indicating a promising future development.

NANOMATERIALS (2021)

Review Biotechnology & Applied Microbiology

Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling

Hani Nasser Abdelhamid et al.

Summary: Cellulose-based materials play a crucial role in water remediation, offering advantages such as high biocompatibility, rich functional groups, and various derivatives. They can be used to remove a wide range of water pollutants, including heavy metal ions, organic dyes, and microbial species, while also serving as antibacterial agents or membrane materials.

FRONTIERS IN CHEMICAL ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Oxygenated Nanocellulose-A Material Platform for Antibacterial Wound Dressing Devices

Maja Fjellstad Knutsen et al.

Summary: This study developed oxygenated cellulose nanofibrils with high oxidation levels that exhibit strong antibacterial effects, effectively inhibiting the growth of Pseudomonas aeruginosa and Staphylococcus aureus by forming a network surrounding and entrapping the bacteria. Therefore, oxygenated nanocellulose shows promising potential as a material for antibacterial wound dressings.

ACS APPLIED BIO MATERIALS (2021)

Article Chemistry, Multidisciplinary

3D-printed monolithic biofilters based on a polylactic acid (PLA) - hydroxyapatite (HAp) composite for heavy metal removal from an aqueous medium

Natalia Fijol et al.

Summary: High flux, monolithic water purification filters based on PLA functionalised with HAp were prepared by a specific process, showing good adsorption capabilities towards heavy metals. The filters have consistent pore geometry and metal ion adsorption capacity, with adsorption mechanisms mainly involving ion exchange, dissolution and precipitation, surface complexation, etc.

RSC ADVANCES (2021)

Article Engineering, Environmental

Highly selective dehydration of methanol over metal-organic frameworks (MOFs)-derived ZnO@Carbon

Mohamed Nady Goda et al.

Summary: The study demonstrates that ZnO@C catalysts prepared using metal-organic frameworks and zeolitic imidazolate frameworks exhibit excellent catalytic performance in the methanol dehydration process for DME production, showing high conversion rates and selectivity, and can be recycled multiple times with sustained catalytic activity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Photocatalytic hydrogen generation via water splitting using ZIF-67 derived Co3O4@C/TiO2

Haitham M. El-Bery et al.

Summary: Water splitting via photocatalysis using titanium dioxide holds great potential for hydrogen gas generation. In this study, cobalt oxide embedded nitrogen-doped carbon (Co3O4@C) was synthesized using zeolitic imidazolate framework (ZIF-67) as a sacrificial precursor, which showed significant enhancement in photocatalytic performance and hydrogen generation rates when used as a co-catalyst with TiO2. The Co3O4@C/TiO2 system exhibited recyclability for more than four cycles without significant loss of performance, indicating its potential for further exploration in effective photocatalysis.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Chemistry, Analytical

Carbon dots as naked eye sensors

Hafiz Muhammad Junaid et al.

Summary: Optical sensors are attractive to chemists for their selectivity, sensitivity, robustness, and cost-effectiveness, enabling onsite detection without the need for instrumentation. Carbon dots (CDs) have been utilized as colorimetric sensors for selective detection of various ionic and molecular species. The development of CDs with selective sensing properties, achieved through chemical tuning and a variety of synthesis methods, has garnered significant attention for their extremely low detection limits.

ANALYST (2021)

Review Nanoscience & Nanotechnology

Insights and Perspectives Regarding Nanostructured Fluorescent Materials toward Tackling COVID-19 and Future Pandemics

Mohit Saraf et al.

Summary: The COVID-19 pandemic has highlighted global unpreparedness in fighting against unknown infectious pathogens, with a lack of vaccines and reliable detection techniques. Material research, particularly focusing on nanomaterials, plays a crucial role in developing antimicrobial agents and biosensors. Nanostructured fluorescent materials have shown promising potential in combating pandemics like COVID-19.

ACS APPLIED NANO MATERIALS (2021)

Article Chemistry, Multidisciplinary

Charged ultrafiltration membranes based on TEMPO-oxidized cellulose nanofibrils/poly(vinyl alcohol) antifouling coating

Andrea Aguilar-Sanchez et al.

Summary: This study demonstrates the potential of TEMPO-oxidized cellulose nanofibrils (T-CNF)/poly(vinyl alcohol) (PVA) coatings to develop functionalized membranes with outstanding antifouling performance and stability in the ultrafiltration regime. The coated membranes showed nano-textured surface, altered surface charge, and improved mechanical properties compared to the original substrate. Additionally, the coated membranes exhibited charge specific adsorption and rejection driven by electrostatic interaction and size exclusion mechanisms, leading to reduced fouling when exposed to BSA and E. coli.

RSC ADVANCES (2021)

Article Engineering, Environmental

High performance and ultrafast reduction of 4-nitrophenol using metal-organic frameworks

Hani Nasser Abdelhamid

Summary: The synthesis of two-dimensional metal-organic frameworks for reducing 4-nitrophenol demonstrates a simple procedure and high catalytic performance, showcasing potential for further applications in catalysis.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Catalytic reduction of 4-nitrophenol using copper terephthalate frameworks and CuO@C composite

Ahlam Azzam Kassem et al.

Summary: The 2D metal-organic frameworks CuBDC and CuO@C were investigated as catalysts for the reduction of 4-nitrophenol, showing high efficiency and stability in converting 4-NP to 4-AP. These materials have promising applications in organic synthesis through nitro group reduction.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Ultrasmall Ru nanoparticles supported on chitin nanofibers for hydrogen production from NaBH4 hydrolysis

Jiapeng Zhang et al.

CHINESE CHEMICAL LETTERS (2020)

Article Green & Sustainable Science & Technology

Hydrogen storage systems based on solid-state NaBH4/Co composite: Effect of catalyst precursor on hydrogen generation rate

O. V. Netskina et al.

RENEWABLE ENERGY (2020)

Article Nanoscience & Nanotechnology

Zirconium Oxide Sulfate-Carbon (ZrOSO4@C) Derived from Carbonized UiO-66 for Selective Production of Dimethyl Ether

Mohamed N. Goda et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Applied

Self-healing stimuli-responsive cellulose nanocrystal hydrogels

Juntao Tang et al.

CARBOHYDRATE POLYMERS (2020)

Review Polymer Science

Development, processing and applications of bio-sourced cellulose nanocrystal composites

Celine Calvino et al.

PROGRESS IN POLYMER SCIENCE (2020)

Editorial Material Microbiology

Nanocytotoxicity using matrix-assisted laser desorption ionization mass spectrometry

Hani Nasser Abdelhamid

FUTURE MICROBIOLOGY (2020)

Review Polymer Science

Multifaceted applications of cellulosic porous materials in environment, energy, and health

Huan Cheng et al.

PROGRESS IN POLYMER SCIENCE (2020)

Review Engineering, Biomedical

Comprehensive review on nanocellulose: Recent developments, challenges and future prospects

Paul Thomas et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Review Nanoscience & Nanotechnology

A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials

Mandana Tavakolian et al.

NANO-MICRO LETTERS (2020)

Article Chemistry, Applied

Hydrogenation reduction of dyes using metal-organic framework-derived CuO@C

Ahlam Azzam Kassem et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Review Chemistry, Inorganic & Nuclear

Metal-organic framework (MOF)-derived catalysts for fine chemical production

Hannelore Konnerth et al.

COORDINATION CHEMISTRY REVIEWS (2020)

Review Biochemistry & Molecular Biology

Review on Magnetic Natural Polymer Constructed Hydrogels as Vehicles for Drug Delivery

Jing Liao et al.

BIOMACROMOLECULES (2020)

Article Chemistry, Applied

Carbonized chitosan encapsulated hierarchical porous zeolitic imidazolate frameworks nanoparticles for gene delivery

Hani Nasser Abdelhamid et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Article Chemistry, Applied

Gene delivery using cell penetrating peptides-zeolitic imidazolate frameworks

Hani Nasser Abdelhamid et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Review Medicine, Research & Experimental

Natural carbon-based quantum dots and their applications in drug delivery: A review

Akhila Nair et al.

BIOMEDICINE & PHARMACOTHERAPY (2020)

Review Nanoscience & Nanotechnology

Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review

Silvia Tortorella et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)

Review Polymer Science

Nanocellulose in Drug Delivery and Antimicrobially Active Materials

Kaja Kupnik et al.

POLYMERS (2020)

Article Engineering, Environmental

One-pot synthesis of hierarchical porous covalent organic frameworks and two-dimensional nanomaterials for selective removal of anionic dyes

Ahmed R. Abdellah et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Chemistry, Inorganic & Nuclear

UiO-66 as a catalyst for hydrogen production via the hydrolysis of sodium borohydride

Hani Nasser Abdelhamid

DALTON TRANSACTIONS (2020)

Article Materials Science, Biomaterials

A cerium-based MOFzyme with multi-enzyme-like activity for the disruption and inhibition of fungal recolonization

Hani Nasser Abdelhamid et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

Correction Materials Science, Biomaterials

A cerium-based MOFzyme with multi-enzyme-like activity for the disruption and inhibition of fungal recolonization (vol 8, pg 7548, 2020)

Hani Nasser Abdelhamid et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

Article Engineering, Environmental

Dye encapsulated hierarchical porous zeolitic imidazolate frameworks for carbon dioxide adsorption

Hani Nasser Abdelhamid

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Review Chemistry, Physical

Nanostructured semiconductor supported iron catalysts for heterogeneous photo-Fenton oxidation: a review

Xiaoning Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Multidisciplinary

Emerging trends in porous materials for CO2capture and conversion

Gurwinder Singh et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Surface modified cellulose nanomaterials: a source of non-spherical nanoparticles for drug delivery

Yee Yee Khine et al.

MATERIALS HORIZONS (2020)

Article Chemistry, Inorganic & Nuclear

Hierarchical porous ZIF-8 for hydrogen production via the hydrolysis of sodium borohydride

Hani Nasser Abdelhamid

DALTON TRANSACTIONS (2020)

Article Biochemistry & Molecular Biology

Conjugating biomaterials with photosensitizers: advances and perspectives for photodynamic antimicrobial chemotherapy

Nidia Maldonado-Carmona et al.

PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES (2020)

Review Chemistry, Multidisciplinary

Metal organic frameworks for biomass conversion

Ruiqi Fang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Biochemistry & Molecular Biology

Thymol enriched bacterial cellulose hydrogel as effective material for third degree burn wound repair

Swaminathan Jiji et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Article Chemistry, Physical

Effective TiO2 supported Cu-Complex catalyst in NaBH4 hydrolysis reaction to hydrogen generation

Dilek Kilinc et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Chemistry, Physical

Hydrogen production from phototrophic microorganisms: Reality and perspectives

Kenzhegul Bolatkhan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Chemistry, Multidisciplinary

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design

Mohammad Yaser Masoomi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Applied

Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications

Haishun Du et al.

CARBOHYDRATE POLYMERS (2019)

Review Energy & Fuels

Potential of acetone-butanol-ethanol (ABE) as a biofuel

Yuqiang Li et al.

Article Chemistry, Applied

Hierarchical porous zeolitic imidazolate frameworks nanoparticles for efficient adsorption of rare-earth elements

Ahmed F. Abdel-Magied et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Article Chemistry, Applied

Luminescence properties of a family of lanthanide metal-organic frameworks

Hani Nasser Abdelhamid et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Article Chemistry, Applied

Synthesis of CdS-modified chitosan quantum dots for the drug delivery of Sesamol

Hani Nasser Abdelhamid et al.

CARBOHYDRATE POLYMERS (2019)

Review Chemistry, Inorganic & Nuclear

Functional metal-organic frameworks for catalytic applications

Chunping Xu et al.

COORDINATION CHEMISTRY REVIEWS (2019)

Review Biochemistry & Molecular Biology

Nanocrystalline cellulose: Preparation, physicochemical properties, and applications in drug delivery systems

Ansar Karimian et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Review Materials Science, Multidisciplinary

Cellulose Nanocrystals as a Sustainable Raw Material: Cytotoxicity and Applications on Healthcare Technology

Bruna Luiza Pelegrini et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Article Nanoscience & Nanotechnology

Surfactant assisted synthesis of hierarchical porous metal-organic frameworks nanosheets

Hani Nasser Abdelhamid

NANOTECHNOLOGY (2019)

Article Multidisciplinary Sciences

Towards implementing hierarchical porous zeolitic imidazolate frameworks in dye-sensitized solar cells

Hani Nasser Abdelhamid et al.

ROYAL SOCIETY OPEN SCIENCE (2019)

Review Chemistry, Analytical

Nanoparticle-based surface assisted laser desorption ionization mass spectrometry: a review

Hani Nasser Abdelhamid

MICROCHIMICA ACTA (2019)

Article Nanoscience & Nanotechnology

Injectable Biocompatible Hydrogels from Cellulose Nanocrystals for Locally Targeted Sustained Drug Release

Pascal Bertsch et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Applied

Advances in tissue engineering of nanocellulose-based scaffolds: A review

Huize Luo et al.

CARBOHYDRATE POLYMERS (2019)

Article Chemistry, Physical

Metal-organic frameworks (MOFs) and MOFs-derived CuO@C for hydrogen generation from sodium borohydride

Ahlam Azzam Kassem et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Biochemical Research Methods

A New Binary Matrix for Specific Detection of Mercury(II) Using Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

Hani Nasser Abdelhamid et al.

JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY (2019)

Review Biotechnology & Applied Microbiology

Applications of cellulose and chitin/chitosan derivatives and composites as antibacterial materials: current state and perspectives

Shahia Khattak et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2019)

Review Chemistry, Inorganic & Nuclear

Metal-organic frameworks and porous organic polymers for sustainable fixation of carbon dioxide into cyclic carbonates

Jun Liang et al.

COORDINATION CHEMISTRY REVIEWS (2019)

Article Materials Science, Biomaterials

Ultrasonicated graphene oxide enhances bone and skin wound regeneration

Kamal Hany Hussein et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Nanoscience & Nanotechnology

Synergistic Superhydrophobic and Photodynamic Cotton Textiles with Remarkable Antibacterial Activities

Lingjie Song et al.

ACS APPLIED BIO MATERIALS (2019)

Review Chemistry, Multidisciplinary

Carbon capture and conversion using metal-organic frameworks and MOF-based materials

Meili Ding et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Physical

Harnessing MOF materials in photovoltaic devices: recent advances, challenges, and perspectives

Chu-Chen Chueh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Energy & Fuels

Carbon supported bimetallic Ru-Co catalysts for H2 production through NaBH4 and NH3BH3 hydrolysis

R. Fiorenza et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Review Chemistry, Applied

Cellulose nanocrystals as carriers in medicine and their toxicities: A review

Amedea B. Seabra et al.

CARBOHYDRATE POLYMERS (2018)

Review Chemistry, Applied

Self-assembled cellulose materials for biomedicine: A review

Jisheng Yang et al.

CARBOHYDRATE POLYMERS (2018)

Review Chemistry, Multidisciplinary

Catalysis and photocatalysis by metal organic frameworks

Amarajothi Dhakshinamoorthy et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Biochemistry & Molecular Biology

Fabrication and cytotoxicity assessment of cellulose nanofibrils using Bassia eriophora biomass

Jegan Athinarayanan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Article Chemistry, Physical

Synthesis of polymer supported Ni (II)-Schiff Base complex and its usage as a catalyst in sodium borohydride hydrolysis

Dilek Kilinc et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Review Chemistry, Multidisciplinary

Cell penetrating peptides in ocular drug delivery: State of the art

S. Pescina et al.

JOURNAL OF CONTROLLED RELEASE (2018)

Article Biochemistry & Molecular Biology

Photo-antimicrobial efficacy of zinc complexes of porphyrin and phthalocyanine activated by inexpensive consumer LED lamp

Lijo George et al.

JOURNAL OF INORGANIC BIOCHEMISTRY (2018)

Review Chemistry, Analytical

Nanoparticle assisted laser desorption/ionization mass spectrometry for small molecule analytes

Hani Nasser Abdelhamid

MICROCHIMICA ACTA (2018)

Review Green & Sustainable Science & Technology

Synthesis chemistry of metal-organic frameworks for CO2 capture and conversion for sustainable energy future

Abass A. Olajire

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Multidisciplinary Sciences

Ordered macro-microporous metal-organic framework single crystals

Kui Shen et al.

SCIENCE (2018)

Article Spectroscopy

Selective biosensing of Staphylococcus aureus using chitosan quantum dots

Hani Nasser Abdelhamid et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2018)

Article Multidisciplinary Sciences

Synthetic molecular evolution of hybrid cell penetrating peptides

W. Berkeley Kauffman et al.

NATURE COMMUNICATIONS (2018)

Article Engineering, Biomedical

Chitosan enhances gene delivery of oligonucleotide complexes with magnetic nanoparticles-cell-penetrating peptide

Moataz Dowaidar et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2018)

Review Biochemistry & Molecular Biology

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Mariana Q. Mesquita et al.

MOLECULES (2018)

Review Biochemistry & Molecular Biology

Cellulose Nanomaterials-Binding Properties and Applications: A Review

Ali H. Tayeb et al.

MOLECULES (2018)

Article Chemistry, Multidisciplinary

Cellulose-Lignin Biodegradable and Flexible UV Protection Film

Hasan Sadeghifar et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Review Chemistry, Multidisciplinary

Recovery of rare earth elements with ionic liquids

Kaiying Wang et al.

GREEN CHEMISTRY (2017)

Article Metallurgy & Metallurgical Engineering

Recovery of rare earth elements from nitrophosphoric acid solutions

Mahmood Alemrajabi et al.

HYDROMETALLURGY (2017)

Article Chemistry, Physical

Hydrogen generation from alkaline NaBH4 solution using nanostructured Co-Ni-P catalysts

Yan Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Base-metal catalysts based on porous layered double hydroxides for alkaline-free sodium borohydride hydrolysis

Mehdi Mostajeran et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Analytical

Thymine chitosan nanomagnets for specific preconcentration of mercury(II) prior to analysis using SELDI-MS

Hani Nasser Abdelhamid et al.

MICROCHIMICA ACTA (2017)

Article Chemistry, Analytical

A water-stable lanthanide metal-organic framework for fluorimetric detection of ferric ions and tryptophan

Hani Nasser Abdelhamid et al.

MICROCHIMICA ACTA (2017)

Article Chemistry, Multidisciplinary

Rare Earth Ions Adsorption onto Graphene Oxide Nanosheets

Radwa M. Ashour et al.

SOLVENT EXTRACTION AND ION EXCHANGE (2017)

Article Chemistry, Multidisciplinary

Mesoporous Ruthenium Oxide: A Heterogeneous Catalyst for Water Oxidation

M. Naeem Iqbal et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Chemistry, Multidisciplinary

ZIF-8-Based Membranes for Carbon Dioxide Capture and Separation

Xiao Gong et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Materials Science, Biomaterials

2,3-Dialdehyde nanofibrillated cellulose as a potential material for the treatment of MRSA infection

Kaiwen Mou et al.

JOURNAL OF MATERIALS CHEMISTRY B (2017)

Review Chemistry, Multidisciplinary

Metal organic framework based catalysts for CO2 conversion

James W. Maina et al.

MATERIALS HORIZONS (2017)

Review Chemistry, Multidisciplinary

3D network of cellulose-based energy storage devices and related emerging applications

Saikat Dutta et al.

MATERIALS HORIZONS (2017)

Article Chemistry, Inorganic & Nuclear

A new strongly paramagnetic cerium-containing microporous MOF for CO2 fixation under ambient conditions

Sabuj Kanti Das et al.

DALTON TRANSACTIONS (2017)

Article Chemistry, Multidisciplinary

Tuneable nature of metal organic frameworks as heterogeneous solid catalysts for alcohol oxidation

Amarajothi Dhakshinamoorthy et al.

CHEMICAL COMMUNICATIONS (2017)

Article Biochemistry & Molecular Biology

Graphene oxide nanosheets in complex with cell penetrating peptides for oligonucleotides delivery

Moataz Dowaidar et al.

BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS (2017)

Article Biochemical Research Methods

Surface tuning laser desorption/ionization mass spectrometry (STLDI-MS) for the analysis of small molecules using quantum dots

Hani Nasser Abdelhamid et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)

Article Pharmacology & Pharmacy

Bacterial nanocellulose: the future of controlled drug delivery?

Yvette Poetzinger et al.

THERAPEUTIC DELIVERY (2017)

Article Biochemistry & Molecular Biology

Structure and Biocompatibility of Bioabsorbable Nanocomposites of Aliphatic-Aromatic Copolyester and Cellulose Nanocrystals

Shahab Kashani Rahimi et al.

BIOMACROMOLECULES (2017)

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks for Heterogeneous Basic Catalysis

Li Zhu et al.

CHEMICAL REVIEWS (2017)

Review Chemistry, Physical

Review of Hydrogels and Aerogels Containing Nanocellulose

Kevin J. De France et al.

CHEMISTRY OF MATERIALS (2017)

Review Engineering, Biomedical

3D printing of nano-cellulosic biomaterials for medical applications

Sahar Sultan et al.

CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)

Article Chemistry, Applied

Preparation of green and gelatin-free nanocrystalline cellulose capsules

Yapei Zhang et al.

CARBOHYDRATE POLYMERS (2017)

Review Chemistry, Physical

Recent advances in the application of cellulose nanocrystals

Nathan Grishkewich et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2017)

Article Chemistry, Applied

The interaction of wood nanocellulose dressings and the wound pathogen P. aeruginosa

Alison A. Jack et al.

CARBOHYDRATE POLYMERS (2017)

Review Biochemical Research Methods

Gold nanoparticles assisted laser desorption/ionization mass spectrometry and applications: from simple molecules to intact cells

Hani Nasser Abdelhamid et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2016)

Article Chemistry, Physical

The modified nanocrystalline cellulose for hydrophobic drug delivery

Weixia Qing et al.

APPLIED SURFACE SCIENCE (2016)

Article Chemistry, Applied

Producing ultrapure wood cellulose nanofibrils and evaluating the cytotoxicity using human skin cells

Henriette Rogstad Nordli et al.

CARBOHYDRATE POLYMERS (2016)

Review Materials Science, Paper & Wood

Applications of bacterial cellulose in food, cosmetics and drug delivery

Hanif Ullah et al.

CELLULOSE (2016)

Review Biochemical Research Methods

Nanocellulose, a tiny fiber with huge applications

Tiffany Abitbol et al.

CURRENT OPINION IN BIOTECHNOLOGY (2016)

Review Pharmacology & Pharmacy

Cellulose nanocrystals: a versatile nanoplatform for emerging biomedical applications

Rajesh Sunasee et al.

EXPERT OPINION ON DRUG DELIVERY (2016)

Article Chemistry, Physical

Hydrogen generation from hydrolysis of sodium borohydride using nanostructured Ni-B catalysts

Yan Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Hydrogen generation and storage by aqueous sodium borohydride (NaBH4) hydrolysis for small portable fuel cells (H2 - PEMFC)

H. X. Nunes et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Multidisciplinary

Nanofibrillar cellulose wound dressing in skin graft donor site treatment

T. Hakkarainen et al.

JOURNAL OF CONTROLLED RELEASE (2016)

Article Chemistry, Multidisciplinary

One-pot Synthesis of Metal Organic Frameworks with Encapsulated Target Molecules and Their Applications for Controlled Drug Delivery

Haoquan Zheng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Biochemical Research Methods

Effect of surface capping of quantum dots (CdTe) on proteomics

Zhen-Yu Chen et al.

RAPID COMMUNICATIONS IN MASS SPECTROMETRY (2016)

Article Green & Sustainable Science & Technology

Nanostructured cobalt-phosphorous catalysts for hydrogen generation from hydrolysis of sodium borohydride solution

Yan Wang et al.

RENEWABLE ENERGY (2016)

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks for CO2 Chemical Transformations

Hongming He et al.

Review Engineering, Environmental

A review on Fenton-like processes for organic wastewater treatment

Nannan Wang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2016)

Review Materials Science, Multidisciplinary

Laser Assisted Synthesis, Imaging and Cancer Therapy of Magnetic Nanoparticles

Hani Nasser Abdelhamid

MATERIALS FOCUS (2016)

Article Nanoscience & Nanotechnology

Redox-Responsive Polycation-Functionalized Cotton Cellulose Nanocrystals for Effective Cancer Treatment

Hao Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Review Biotechnology & Applied Microbiology

Applications of bacterial cellulose and its composites in biomedicine

J. M. Rajwade et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2015)

Article Biochemistry & Molecular Biology

3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications

Kajsa Markstedt et al.

BIOMACROMOLECULES (2015)

Review Biotechnology & Applied Microbiology

Bacterial cellulose as a material for wound treatment: Properties and modifications. A review

Irina Sulaeva et al.

BIOTECHNOLOGY ADVANCES (2015)

Article Materials Science, Biomaterials

Investigation on artificial blood vessels prepared from bacterial cellulose

Shanshan Zang et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Review Chemistry, Analytical

Proteomics analysis of the mode of antibacterial action of nanoparticles and their interactions with proteins

Hani Nasser Abdelhamid et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Synthesis and multifunctional applications of quantum nanobeads for label-free and selective metal chemosensing

Hani Nasser Abdelhamid et al.

RSC ADVANCES (2015)

Article Materials Science, Biomaterials

Potential of PVA-doped bacterial nano-cellulose tubular composites for artificial blood vessels

Jingyu Tang et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Article Materials Science, Paper & Wood

Cytocompatibility and immunomodulatory properties of wood based nanofibrillated cellulose

Miodrag Colic et al.

CELLULOSE (2015)

Review Polymer Science

Recent advances in nanocellulose for biomedical applications

Mehdi Jorfi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Article Biochemistry & Molecular Biology

Synthesis and Cellular Uptake of Folic Acid-Conjugated Cellulose Nanocrystals for Cancer Targeting

Shuping Dong et al.

BIOMACROMOLECULES (2014)

Review Chemistry, Multidisciplinary

Key advances in the chemical modification of nanocelluloses

Youssef Habibi

CHEMICAL SOCIETY REVIEWS (2014)

Review Chemistry, Multidisciplinary

Adsorptive separation on metal-organic frameworks in the liquid phase

Ben Van de Voorde et al.

CHEMICAL SOCIETY REVIEWS (2014)

Article Biophysics

Polymer dots for quantifying the total hydrophobic pathogenic lysates in a single drop

Hani Nasser Abdelhamid et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2014)

Article Biochemical Research Methods

Ultrasensitive, Rapid, and Selective Detection of Mercury Using Graphene Assisted Laser Desorption/Ionization Mass Spectrometry

Hani Nasser Abdelhamid et al.

JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY (2014)

Review Chemistry, Multidisciplinary

Surface modification of cellulose nanocrystals

Samuel Eyley et al.

NANOSCALE (2014)

Article Materials Science, Biomaterials

Facile synthesis of nano silver ferrite (AgFeO2) modified with chitosan applied for biothiol separation

Hani Nasser Abdelhamid et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

Article Chemistry, Multidisciplinary

Chemical modification of cellulose extracted from sugarcane bagasse: Preparation of hydroxyethyl cellulose

E. S. Abdel-Halim

ARABIAN JOURNAL OF CHEMISTRY (2014)

Article Chemistry, Multidisciplinary

Facile synthesis of P-doped carbon quantum dots with highly efficient photoluminescence

Jin Zhou et al.

RSC ADVANCES (2014)

Article Chemistry, Multidisciplinary

Graphene oxide as a nanocarrier for gramicidin (GOGD) for high antibacterial performance

Hani Nasser Abdelhamid et al.

RSC ADVANCES (2014)

Article Materials Science, Biomaterials

Rapid and direct MALDI-MS identification of pathogenic bacteria from blood using ionic liquid-modified magnetic nanoparticles (Fe3O4@SiO2)

Mukesh L. Bhaisare et al.

JOURNAL OF MATERIALS CHEMISTRY B (2014)

Article Materials Science, Biomaterials

Graphene nanoflakes as an efficient ionizing matrix for MALDI-MS based lipidomics of cancer cells and cancer stem cells

Pei-Yang Hua et al.

JOURNAL OF MATERIALS CHEMISTRY B (2014)

Article Nanoscience & Nanotechnology

Zeolitic Imidazolate Framework-8 for Fast Adsorption and Removal of Benzotriazoles from Aqueous Solution

Jun-Qing Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Physical

Ru-capped/FeCo nanoflowers with high catalytic efficiency towards hydrolytic dehydrogenation

Ming Wen et al.

JOURNAL OF POWER SOURCES (2013)

Article Materials Science, Biomaterials

Cell proliferation, viability, and in vitro differentiation of equine mesenchymal stem cells seeded on bacterial cellulose hydrogel scaffolds

Pelagie M. Favi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

Review Multidisciplinary Sciences

The Chemistry and Applications of Metal-Organic Frameworks

Hiroyasu Furukawa et al.

SCIENCE (2013)

Article Materials Science, Biomaterials

Probing the interactions of chitosan capped CdS quantum dots with pathogenic bacteria and their biosensing application

Hani Nasser Abdelhamid et al.

JOURNAL OF MATERIALS CHEMISTRY B (2013)

Article Materials Science, Biomaterials

Multifunctional graphene magnetic nanosheet decorated with chitosan for highly sensitive detection of pathogenic bacteria

Hani Nasser Abdelhamid et al.

JOURNAL OF MATERIALS CHEMISTRY B (2013)

Article Chemistry, Physical

Skin tissue repair materials from bacterial cellulose by a multilayer fermentation method

Lina Fu et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Review Biochemical Research Methods

Quantum dot applications endowing novelty to analytical proteomics

Hui-Fen Wu et al.

PROTEOMICS (2012)

Review Chemistry, Multidisciplinary

Nanocelluloses: A New Family of Nature-Based Materials

Dieter Klemm et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Review Chemistry, Multidisciplinary

Cellulose nanomaterials review: structure, properties and nanocomposites

Robert J. Moon et al.

CHEMICAL SOCIETY REVIEWS (2011)

Article Biochemistry & Molecular Biology

Design of Curcumin loaded Cellulose Nanoparticles for Prostate Cancer

Murali Mohan Yallapu et al.

CURRENT DRUG METABOLISM (2011)

Article Nanoscience & Nanotechnology

The use of nanocrystalline cellulose for the binding and controlled release of drugs

John K. Jackson et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2011)

Article Engineering, Biomedical

Bacterial cellulose as a potential vascular graft: Mechanical characterization and constitutive model development

H. Zahedmanesh et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)

Review Polymer Science

Chitosan-A versatile semi-synthetic polymer in biomedical applications

M. Dash et al.

PROGRESS IN POLYMER SCIENCE (2011)

Review Chemistry, Multidisciplinary

Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks

Anh Phan et al.

ACCOUNTS OF CHEMICAL RESEARCH (2010)

Article Chemistry, Physical

Co-αAl2O3-Cu as shaped catalyst in NaBH4 hydrolysis

R. Chamoun et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Hydrogen generation from sodium borohydride solution using a ruthenium supported on graphite catalyst

Yan Liang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Multidisciplinary Sciences

Ultrahigh Porosity in Metal-Organic Frameworks

Hiroyasu Furukawa et al.

SCIENCE (2010)

Article Multidisciplinary Sciences

Multiple Functional Groups of Varying Ratios in Metal-Organic Frameworks

Hexiang Deng et al.

SCIENCE (2010)

Article Engineering, Biomedical

Nanocomposites of bacterial cellulose/hydroxyapatite for biomedical applications

Cristian J. Grande et al.

ACTA BIOMATERIALIA (2009)

Article Materials Science, Paper & Wood

A resorbable calcium-deficient hydroxyapatite hydrogel composite for osseous regeneration

Stacy A. Hutchens et al.

CELLULOSE (2009)

Review Chemistry, Multidisciplinary

Nonviral Vectors for Gene Delivery

Meredith A. Mintzer et al.

CHEMICAL REVIEWS (2009)

Review Chemistry, Multidisciplinary

Metal-organic framework materials as catalysts

JeongYong Lee et al.

CHEMICAL SOCIETY REVIEWS (2009)

Article Chemistry, Applied

Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing

Thawatchai Maneerung et al.

CARBOHYDRATE POLYMERS (2008)

Article Chemistry, Physical

Pd-C powder and thin film catalysts for hydrogen production by hydrolysis of sodium borohydride

N. Patel et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

Sodium borohydride hydrolysis kinetics comparison for nickel, cobalt, and ruthenium boride catalysts

Joshua C. Walter et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Pt and Ru dispersed on LiCoO2 for hydrogen generation from sodium borohydride solutions

Zhaolin Liu et al.

JOURNAL OF POWER SOURCES (2008)

Review Materials Science, Multidisciplinary

Nature's hierarchical materials

Peter Fratzl et al.

PROGRESS IN MATERIALS SCIENCE (2007)

Article Chemistry, Multidisciplinary

Postsynthetic covalent modification of a neutral metal-organic framework

Zhenqiang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)

Review Biochemistry & Molecular Biology

The future prospects of microbial cellulose in biomedical applications

Wojciech K. Czaja et al.

BIOMACROMOLECULES (2007)

Article Engineering, Biomedical

Biomimetic synthesis of calcium-deficient hydroxyapatite in a natural hydrogel

Stacy A. Hutchens et al.

BIOMATERIALS (2006)

Article Multidisciplinary Sciences

Exceptional chemical and thermal stability of zeolitic imidazolate frameworks

Kyo Sung Park et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2006)

Article Engineering, Biomedical

Mechanical properties of bacterial cellulose and interactions with smooth muscle cells

H Bäckdahl et al.

BIOMATERIALS (2006)

Article Chemistry, Physical

Hydrogen generation from hydrolysis of sodium borohydride using Ru(0) nanoclusters as catalyst

S Özkar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2005)

Article Engineering, Biomedical

Endotoxin: The uninvited guest

MB Gorbet et al.

BIOMATERIALS (2005)

Article Engineering, Biomedical

Bacterial cellulose as a potential scaffold for tissue engineering of cartilage

A Svensson et al.

BIOMATERIALS (2005)

Review Chemistry, Multidisciplinary

Cellulose: Fascinating biopolymer and sustainable raw material

D Klemm et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)

Article Multidisciplinary Sciences

Hydrogen storage in microporous metal-organic frameworks

NL Rosi et al.

SCIENCE (2003)

Review Polymer Science

Bacterial synthesized cellulose - artificial blood vessels for microsurgery

D Klemm et al.

PROGRESS IN POLYMER SCIENCE (2001)

Article Chemistry, Physical

An ultrasafe hydrogen generator: aqueous, alkaline borohydride solutions and Ru catalyst

SC Amendola et al.

JOURNAL OF POWER SOURCES (2000)