☆ 4.6 Article

PT-Informer: A Deep Learning Framework for Nuclear Steam Turbine Fault Diagnosis and Prediction

MACHINES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Data-Driven Prognostic Scheme for Bearings Based on a Novel Health Indicator and Gated Recurrent Unit Network

Qing Ni et al.

Summary: This article proposes a systematic prognostic scheme for rolling element bearings, which infers the degradation progression by developing a novel health indicator (HI). The proposed HI reflects the changes in the probability distribution of all cyclic power-spectra and eliminates random fluctuations for accurate prediction of remaining useful life (RUL). The scheme is integrated with a gated recurrent unit network and Bayesian optimization algorithm to establish an intelligent prognosis model with high prediction accuracy and generalization ability.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2023)

添加到收藏夹

Article Chemistry, Analytical

Diagnosis of Multiple Faults in Rotating Machinery Using Ensemble Learning

Udeme Ibanga Inyang et al.

Summary: This paper proposes a comprehensive learning approach with optimized signal processing transforms for single as well as multiple faults diagnosis across different rotating machine components. The optimized feature spaces and deep blending ensemble learning are explored for multiple faults diagnosis of gearbox, bearing, and shaft. The proposed approach shows improved results with different components and faults with nominal retraining, as compared to state-of-the-art approaches using the same datasets.

SENSORS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamic Simulation Model-Driven Fault Diagnosis Method for Bearing under Missing Fault-Type Samples

Junqing Ma et al.

Summary: This paper proposes an intelligent fault diagnosis method based on a dynamic simulation model and WGAN-GN. The simulation signals are used to replace missing fault samples and combined with measured signals for training data input into the proposed WGAN-GN model to expand and enhance the data. The effectiveness of the simulated samples is tested using a fault classification model constructed by stacked autoencoders (SAE), and the results show that the proposed model performs well in diagnosing faults under missing samples and outperforms other methods.

APPLIED SCIENCES-BASEL (2023)

添加到收藏夹

Review Energy & Fuels

A Review of Fault Diagnosis, Status Prediction, and Evaluation Technology for Wind Turbines

Fanghong Zhang et al.

Summary: With the development of high-power wind turbines, there is an increasing need for maintenance. This paper focuses on the monitoring, diagnosis, prediction, and evaluation of wind turbine faults. The early diagnosis of faults is explored, as well as the mathematical and smart fault diagnosis technologies. Through comprehensive investigation, relevant research points and trends in the fault diagnosis, prediction, and assessment of high-power wind turbines are summarized.

ENERGIES (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

MMFSL: A Novel Multimodal Few-Shot Learning Framework for Fault Diagnosis of Industrial Bearings

Lan Cheng et al.

Summary: This article proposes a multimodal few-shot learning method (MMFSL) for unbalanced data modeling of industrial bearings. MMFSL can handle time-series data and images, and evaluate the quality of the generated data. Through experiments, the MMFSL model can significantly improve fault detection accuracy and reduce false alarm rate. Moreover, the fault classification model accuracy is also improved compared to the original datasets.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2023)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Highly imbalanced fault diagnosis of mechanical systems based on wavelet packet distortion and convolutional neural networks

Minghang Zhao et al.

Summary: This paper proposes a new fault diagnosis method based on wavelet packet distortion and convolutional neural networks, which improves the accuracy of fault diagnosis in mechanical systems by increasing faulty samples and using balanced training datasets.

ADVANCED ENGINEERING INFORMATICS (2022)

添加到收藏夹

Article Energy & Fuels

Towards world's low carbon development: The role of clean energy

Boqiang Lin et al.

Summary: This study reveals the importance of clean energy utilization as a mediator and moderator in low-carbon development. Clean energy acts as a mediating variable between national income levels and R&D investment, and positively affects low-carbon development. It also acts as a moderating variable that mitigates the negative impact of industrialization on low-carbon development.

APPLIED ENERGY (2022)

添加到收藏夹

Review Construction & Building Technology

Natural language processing for smart construction: Current status and future directions

Chengke Wu et al.

Summary: This paper reviews the bottom-level techniques and mainstream applications of NLP in the construction industry over the past two decades, covering core steps and related techniques as well as the application of NLP in information extraction, management, and decision-making. Additionally, the paper identifies four research directions, including improving relation extraction, realizing knowledge base auto-development, integrating multi-modal information, and achieving an accuracy-efficiency trade-off.

AUTOMATION IN CONSTRUCTION (2022)

添加到收藏夹

Article Engineering, Industrial

Joint decision-making of parallel machine scheduling restricted in job-machine release time and preventive maintenance with remaining useful life constraints

Xinxin He et al.

Summary: This paper focuses on the correlation between the remaining useful life, job-machine release time and maintenance duration with machine enlistment age in parallel machine scheduling problem. A mixed integer programming model is constructed to minimize makespan and processing loss beyond RUL threshold, with a teaching and learning based optimization algorithm used to solve this NP-hard problem. The fault mode-assisted gated recurrent unit (FGRU) life prediction method is proven more accurate than three common methods, and joint decision-making is shown to effectively reduce time cost for manufacturing enterprises through benchmark cases.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Mathematics

Multiscale Monitoring Using Machine Learning Methods: New Methodology and an Industrial Application to a Photovoltaic System

Hanen Chaouch et al.

Summary: In this study, a multiscale monitoring method for nonlinear processes was developed using a machine learning tool based on kernel PCA and discrete wavelet transform. The proposed method decomposes multivariate data into wavelet coefficients and applies kernel PCA for defect detection. It combines multiscale analysis and kernel PCA to monitor nonlinear processes by considering only the scales with prediction errors exceeding control limits in the data reconstruction phase.

MATHEMATICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Few shot cross equipment fault diagnosis method based on parameter optimization and feature mertic

Hongfeng Tao et al.

Summary: With the rapid development of industrial informatization and deep learning technology, modern data-driven fault diagnosis methods based on deep learning have attracted attention from the industry. However, the scarcity of fault samples in actual industrial environments and cross-domain problems between different devices limit the development of these methods. This paper proposes a model unknown matching network model for fault diagnosis with few samples, which combines parameter optimization and feature metric to address these limitations and achieves promising results in experiments.

MEASUREMENT SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Novel Principal Component Analysis-Informer Model for Fault Prediction of Nuclear Valves

Zhao An et al.

Summary: In this paper, a deep learning fault detection and prediction framework combining PCA and Informer is proposed to solve the problem of online monitoring of nuclear power valves. The effectiveness of the framework for fault diagnosis and prediction of nuclear power valves is demonstrated, enabling online monitoring and maintenance of important equipment without shutting down the nuclear station.

MACHINES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Fault detection of wind turbine based on SCADA data analysis using CNN and LSTM with attention mechanism

Ling Xiang et al.

Summary: A new method for fault detection of wind turbines is proposed in this paper, which combines CNN and LSTM networks trained on SCADA data to enhance accuracy and predictive effectiveness.

MEASUREMENT (2021)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A review on the attention mechanism of deep learning

Zhaoyang Niu et al.

Summary: This paper provides an overview of state-of-the-art attention models and defines a unified model suitable for most attention structures. It describes in detail each step of the attention mechanism implemented in the model and classifies existing attention models based on four criteria. Additionally, it summarizes the use of attention mechanisms in network architectures and typical applications.

NEUROCOMPUTING (2021)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Transformer Networks for Trajectory Forecasting

Francesco Giuliari et al.

Summary: Recent successes in forecasting people motion have largely been based on LSTM models, but this study proposes a new method using Transformer Networks for trajectory forecasting, which transitions from sequential processing to attention-based memory mechanisms. Results show that using Transformer models can achieve better performance in the most challenging trajectory forecasting benchmarks.

2020 25TH INTERNATIONAL CONFERENCE ON PATTERN RECOGNITION (ICPR) (2021)

添加到收藏夹

Review Engineering, Mechanical

Applications of machine learning to machine fault diagnosis: A review and roadmap

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A comprehensive review on convolutional neural network in machine fault diagnosis

Jinyang Jiao et al.

NEUROCOMPUTING (2020)

添加到收藏夹

Article Geography

Traffic transformer: Capturing the continuity and periodicity of time series for traffic forecasting

Ling Cai et al.

TRANSACTIONS IN GIS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel gas turbine fault diagnosis method based on transfer learning with CNN

Shi-sheng Zhong et al.

MEASUREMENT (2019)

添加到收藏夹

Article Thermodynamics

Performance-based fault diagnosis of a gas turbine engine using an integrated support vector machine and artificial neural network method

Amare Desalegn Fentaye et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fault Diagnosis of a Rolling Bearing Using Wavelet Packet Denoising and Random Forests

Ziwei Wang et al.

IEEE SENSORS JOURNAL (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification

Chen Lu et al.

SIGNAL PROCESSING (2017)

添加到收藏夹

Review Engineering, Electrical & Electronic

Condition monitoring and diagnosis of power equipment: review and prospective

Shengtao Li et al.

HIGH VOLTAGE (2017)

添加到收藏夹

Review Energy & Fuels

Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review

Mohammadreza Tahan et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Automation & Control Systems

A Survey of Fault Diagnosis and Fault-Tolerant Techniques-Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches

Zhiwei Gao et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Mechanical

Artificial Neural Network-Based System Identification for a Single-Shaft Gas Turbine

Hamid Asgari et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2013)

添加到收藏夹

Article Engineering, Mechanical

Neural network approach for a combined performance and mechanical health monitoring of a gas turbine engine

Sanjay G. Barad et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

添加到收藏夹

Article Thermodynamics

Fault detection and diagnosis of an industrial steam turbine using fusion of SVM (support vector machine) and ANFIS (adaptive neuro-fuzzy inference system) classifiers

Karim Salahshoor et al.

ENERGY (2010)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Comprehensive Review on the Development of Sustainable Energy Strategy and Implementation in China

Xia Yang et al.

IEEE TRANSACTIONS ON SUSTAINABLE ENERGY (2010)

添加到收藏夹

Article Energy & Fuels

Development and multi-utility of an ANN model for an industrial gas turbine

M. Fast et al.

APPLIED ENERGY (2009)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Fault diagnosis of electronic systems using intelligent techniques: A review

WG Fenton et al.

IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART C-APPLICATIONS AND REVIEWS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.