4.7 Article

Modified ECM-Based Bioink for 3D Printing of Multi-Scale Vascular Networks

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Biochemical Research Methods

Bioprinted 3D outer retina barrier uncovers RPE-dependent choroidal phenotype in advanced macular degeneration

Min Jae Song et al.

Summary: Age-related macular degeneration (AMD) is a leading cause of blindness and originates in the outer-blood-retina-barrier (oBRB) composed of retinal pigment epithelium (RPE), Bruch's membrane, and choriocapillaris. However, the mechanisms of AMD initiation and progression are poorly understood due to the lack of physiologically relevant human oBRB models. In this study, a native-like three-dimensional (3D) oBRB tissue (3D-oBRB) was engineered using bioprinting techniques, allowing for the study of RPE-choriocapillaris interactions under both healthy and diseased conditions.

NATURE METHODS (2023)

Article Materials Science, Multidisciplinary

Two Color Imaging of Different Hypoxia Levels in Cancer Cells

Shuai Li et al.

Summary: Fabricating engineered tissues with vascular networks is crucial for successful implantation and cell viability. Various approaches have been explored, and suspension bath-based 3D bioprinting has shown great potential for biomimetic vascular networks. This review provides an overview of recent efforts in 3D bioprinting vascular networks in suspension baths and proposes future perspectives for optimal structure and biological function.

APPLIED MATERIALS TODAY (2023)

Article Chemistry, Multidisciplinary

Post-Maturation Reinforcement of 3D-Printed Vascularized Cardiac Tissues

Eric Silberman et al.

Summary: This article presents a method for reinforcing an engineered cardiac tissue using induced pluripotent stem cells (iPSCs) and an extracellular matrix (ECM)-based hydrogel, which bridges the gap between the mechanical properties of natural and synthetic materials. The reinforcement is done post-fabrication and allows for the use of 3D-printing technology to create fully cellularized and vascularized cardiac tissues. The mechanical properties of the tissue are significantly increased through the deployment of a tissue-penetrating reinforcer during the maturation process in a soft hydrogel.

ADVANCED MATERIALS (2023)

Review Biochemistry & Molecular Biology

Patient-Specific iPSCs-Based Models of Neurodegenerative Diseases: Focus on Aberrant Calcium Signaling

Dmitriy A. Grekhnev et al.

Summary: The development of cell reprogramming technologies has made significant contributions to the study of neurodegenerative diseases, allowing for a better understanding of the molecular mechanisms underlying these pathologies and facilitating the identification of effective drugs.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Review Cardiac & Cardiovascular Systems

Bioengineering approaches to treat the failing heart: from cell biology to 3D printing

Moran Yadid et al.

Summary: This article provides an overview of the latest developments in cardiac tissue engineering, the challenges that still need to be addressed, and future directions for the field. It discusses various approaches from cellular level to engineering planar cardiac patches and volumetric organs, highlighting the state-of-the-art technologies that enable the bioengineering of functional cardiac tissues.

NATURE REVIEWS CARDIOLOGY (2022)

Review Nanoscience & Nanotechnology

Engineering the multiscale complexity of vascular networks

Colleen O'Connor et al.

Summary: This Review discusses how materials advances have facilitated the development of vascular engineering approaches, driven by both technology and nature, to create vascular networks for various applications. It emphasizes the importance of understanding vascular structure and highlights new methods such as bioprinting, organoids and microfluidic systems for fabricating 3D vascular topologies at a cellular scale with lumen perfusion. The Review also highlights the remaining knowledge gaps and opportunities in this field.

NATURE REVIEWS MATERIALS (2022)

Article Multidisciplinary Sciences

Development of iPSC-based clinical trial selection platform for patients with ultrarare diseases

Glen Lester Sequiera et al.

Summary: This study reports the use of an iPSC-based platform to assess drug efficacy and validate personalized treatments for a patient with an ultrarare disease. The results demonstrate the potential of this platform in aiding decision-making for future clinical trials.

SCIENCE ADVANCES (2022)

Article Biology

Mechanical Behavior of Blood Vessels: Elastic and Viscoelastic Contributions

David Sanchez-Molina et al.

Summary: This study investigated the mechanical properties of cerebral bridging veins and discovered their viscoelastic behavior using advanced microtensile equipment. By proposing more sensitive testing methods to observe these effects, it provided a theoretical explanation for why previous studies may not have found significant viscoelastic effects in uniaxial tests at moderate strain rates.

BIOLOGY-BASEL (2021)

Article Engineering, Multidisciplinary

Bioprinting of Small-Diameter Blood Vessels

Xia Cao et al.

Summary: This review discusses the increasing demand for bioengineered blood vessels and the potential of 3D bioprinting technology in fabricating vascularized tissue constructs, with a focus on small-diameter blood vessels.

ENGINEERING (2021)

Review Biochemistry & Molecular Biology

Human iPSC-Based Modeling of Central Nerve System Disorders for Drug Discovery

Lu Qian et al.

Summary: The high-throughput drug screen identifies potential therapeutics for clinical trials, but current disease modeling methods have limitations with limited physiological relevancy of human patients, hindering clinical efficacy translation and contributing to high clinical attrition rates. The emergence of induced pluripotent stem cell (iPSC) technology revolutionizes drug discovery by providing more sophisticated tissue architectures and environmental cues through iPSC-based three-dimensional (3D) tissue engineering. This advanced modeling with evolved structural complexity, particularly in 3D organoids/spheroids, propels drug discovery by exhibiting more human-specific and diverse pathologies not seen in 2D or animal models.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Article Materials Science, Multidisciplinary

Bioink design for extrusion-based bioprinting

Tao Zhang et al.

Summary: Extrusion-based bioprinting is the most important method for 3D bioprinting, creating living tissues and organs by stacking cells and materials layer by layer. Bioink plays a crucial role in this process, determining cell survival, growth, and organ precision.

APPLIED MATERIALS TODAY (2021)

Review Biotechnology & Applied Microbiology

3D Bioprinting of Vascularized Tissues for in vitro and in vivo Applications

Earnest P. Chen et al.

Summary: The aim of tissue engineering with 3D bioprinting is to construct fully functional tissue and organ replacements for clinical applications. One of the main challenges is maintaining tissue viability through the inclusion of complex vascular networks. Recent advancements have made great strides in incorporating vascular networks in 3D printed tissue and organs, offering new possibilities for creating biologically functional tissues and organs.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

3D Bioprinting of Engineered Tissue Flaps with Hierarchical Vessel Networks (VesselNet) for Direct Host-To-Implant Perfusion

Ariel A. Szklanny et al.

Summary: Creating engineered hierarchical vasculatures is crucial for implantable functional thick tissues. This study introduces a combined approach using millimetric vessel-like scaffolds and 3D bioprinted vascularized tissues to achieve fully engineered hierarchical vascular constructs for implantation. The use of sacrificial molds, endothelial cells, and vascularizing hydrogels enables the formation of functional vessels within the engineered tissue, promoting tissue perfusion and host vasculature ingrowth.

ADVANCED MATERIALS (2021)

Article Biochemistry & Molecular Biology

Direct and Indirect Biomimetic Peptide Modification of Alginate: Efficiency, Side Reactions, and Cell Response

Anna Golunova et al.

Summary: In this study, bone-sialoprotein derived peptide was successfully conjugated to the alginate molecule using four different methods, leading to efficient peptide conjugation. Cell culture experiments demonstrated the positive effect of peptide presence on the adhesion of human embryonic stem cells.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Article Biochemical Research Methods

Differentiation and characterization of human iPSC- derived vascular endothelial cells under physiological shear stress

Nadia O. Abutaleb et al.

Summary: In this study, a 7-day protocol using small molecules to regulate specific transcription factors successfully differentiated up to 55 million vascular endothelial cells from 3.5 million human iPSCs. A parallel-plate flow chamber system was also established for studying EC behavior under physiological shear stress.

STAR PROTOCOLS (2021)

Review Engineering, Biomedical

The mechanical characterization of blood vessels and their substitutes in the continuous quest for physiological-relevant performances. A critical review

D. B. Camasao et al.

Summary: This article discusses the mechanical characteristics of vascular substitutes and their impact on blood flow, highlighting the differences in testing methods and data analysis found in the literature. It also suggests using different testing methods at different stages of vascular substitute development, while emphasizing the importance of following ISO standards whenever possible.

MATERIALS TODAY BIO (2021)

Article Engineering, Biomedical

Transparent support media for high resolution 3D printing of volumetric cell-containing ECM structures

Assaf Shapira et al.

BIOMEDICAL MATERIALS (2020)

Review Cell Biology

The basement membrane as a structured surface - role in vascular health and disease

Claire Leclech et al.

JOURNAL OF CELL SCIENCE (2020)

Article Engineering, Biomedical

Prevascularized Scaffolds Bearing Human Dental Pulp Stem Cells for Treating Complete Spinal Cord Injury

Shaowei Guo et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Article Engineering, Biomedical

Multiscale bioprinting of vascularized models

Amir K. Miri et al.

BIOMATERIALS (2019)

Article Chemistry, Multidisciplinary

3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts

Nadav Noor et al.

ADVANCED SCIENCE (2019)

Review Cell & Tissue Engineering

Oxygen and nutrient delivery in tissue engineering: Approaches to graft vascularization

Timo Rademakers et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)

Review Physiology

PASSING THE VASCULAR BARRIER: ENDOTHELIAL SIGNALING PROCESSES CONTROLLING EXTRAVASATION

Nina Wettschureck et al.

PHYSIOLOGICAL REVIEWS (2019)

Article Engineering, Biomedical

A Versatile Biosynthetic Hydrogel Platform for Engineering of Tissue Analogues

Barbara J. Klotz et al.

ADVANCED HEALTHCARE MATERIALS (2019)

Article Multidisciplinary Sciences

Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels

Mark A. Skylar-Scott et al.

SCIENCE ADVANCES (2019)

Article Chemistry, Multidisciplinary

Personalized Hydrogels for Engineering Diverse Fully Autologous Tissue Implants

Reuven Edri et al.

ADVANCED MATERIALS (2019)

Article Engineering, Biomedical

Opportunities and challenges of translational 3D bioprinting

Sean V. Murphy et al.

Nature Biomedical Engineering (2019)

Article Chemistry, Multidisciplinary

Complex 3D-Printed Microchannels within Cell-Degradable Hydrogels

Kwang Hoon Song et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Cell & Tissue Engineering

Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise

H. -H. Greco Song et al.

CELL STEM CELL (2018)

Review Biochemistry & Molecular Biology

Drug screening for human genetic diseases using iPSC models

Matthew S. Elitt et al.

HUMAN MOLECULAR GENETICS (2018)

Article Multidisciplinary Sciences

Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique

Jan Schoeneberg et al.

SCIENTIFIC REPORTS (2018)

Article Biotechnology & Applied Microbiology

Localization of Engineered Vasculature within 3D Tissue Constructs

Shira Landau et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2018)

Article Cell Biology

Drug discovery for Diamond-Blackfan anemia using reprogrammed hematopoietic progenitors

Sergei Doulatov et al.

SCIENCE TRANSLATIONAL MEDICINE (2017)

Article Biochemistry & Molecular Biology

Tuning the Flexibility of Glycine-Serine Linkers To Allow Rational Design of Multidomain Proteins

Martijn van Rosmalen et al.

BIOCHEMISTRY (2017)

Article Biochemistry & Molecular Biology

Effect of Spacer Length and Type on the Biological Activity of Peptide-Polysaccharide Matrices

Jun Kumai et al.

BIOPOLYMERS (2016)

Article Multidisciplinary Sciences

Three-dimensional bioprinting of thick vascularized tissues

David B. Kolesky et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Review Immunology

Inflammation in tissue engineering: The Janus between engraftment and rejection

Annunziata Crupi et al.

EUROPEAN JOURNAL OF IMMUNOLOGY (2015)

Article Engineering, Biomedical

Fabrication of omentum-based matrix for engineering vascularized cardiac tissues

Michal Shevach et al.

BIOFABRICATION (2014)

Article Biotechnology & Applied Microbiology

A new, rapid and reproducible method to obtain high quality endothelium in vitro

Nuria Jimenez et al.

CYTOTECHNOLOGY (2013)

Article Engineering, Biomedical

The effect of immobilized RGD peptide in alginate scaffolds on cardiac tissue engineering

Michal Shachar et al.

ACTA BIOMATERIALIA (2011)

Review Pharmacology & Pharmacy

Vascularization is the key challenge in tissue engineering

Esther C. Novosel et al.

ADVANCED DRUG DELIVERY REVIEWS (2011)

Article Engineering, Biomedical

Biodegradable collagen patch with covalently immobilized VEGF for myocardial repair

Yasuo Miyagi et al.

BIOMATERIALS (2011)

Article Biophysics

Elucidating the Role of Matrix Stiffness in 3D Cell Migration and Remodeling

M. Ehrbar et al.

BIOPHYSICAL JOURNAL (2011)

Article Cell & Tissue Engineering

Transplantation of a Tissue-Engineered Human Vascularized Cardiac Muscle

Ayelet Lesman et al.

TISSUE ENGINEERING PART A (2010)

Article Engineering, Biomedical

Cell proliferation and migration in silk fibroin 3D scaffolds

Biman B. Mandal et al.

BIOMATERIALS (2009)

Article Biochemistry & Molecular Biology

Induction of pluripotent stem cells from adult human fibroblasts by defined factors

Kazutoshi Takahashi et al.

Article Engineering, Biomedical

A porous photocurable elastomer for cell encapsulation and culture

Sharon Gerecht et al.

BIOMATERIALS (2007)

Article Biochemistry & Molecular Biology

Biomechanical properties of native basement membranes

Joseph Candiello et al.

FEBS JOURNAL (2007)

Article Anatomy & Morphology

Commercial considerations in tissue engineering

Jonathan Mansbridge

JOURNAL OF ANATOMY (2006)

Article Biophysics

The dynamics and mechanics of endothelial cell spreading

CA Reinhart-King et al.

BIOPHYSICAL JOURNAL (2005)

Review Physiology

Expression and function of laminins in the embryonic and mature vasculature

R Hallmann et al.

PHYSIOLOGICAL REVIEWS (2005)

Article Biochemistry & Molecular Biology

Endothelial signaling during development

O Cleaver et al.

NATURE MEDICINE (2003)

Article Pharmacology & Pharmacy

The vascular system - An overview of structure and function

MK Pugsley et al.

JOURNAL OF PHARMACOLOGICAL AND TOXICOLOGICAL METHODS (2000)