相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Estimation of strength, rheological parameters, and impact of raw constituents of alkali-activated mortar using machine learning and SHapely Additive exPlanations (SHAP)
Sohaib Nazar et al.
CONSTRUCTION AND BUILDING MATERIALS (2023)
Physically explicable mathematical model for strength prediction of UHPFRC
S. H. Chu et al.
ENGINEERING STRUCTURES (2023)
Fresh properties and characteristic testing methods for alkali-activated materials: A review
Y. K. Kong et al.
JOURNAL OF BUILDING ENGINEERING (2023)
Alkali activated cement mixture at ambient curing: Strength, workability, and setting time
Biruk Hailu Tekle et al.
STRUCTURAL CONCRETE (2022)
Influences of CO2-cured cement powders on hydration of cement paste
Yukun Kong et al.
GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2022)
Use of hydrated cement pastes (HCP) as a CO2 sponge
Y. K. Kong et al.
JOURNAL OF CO2 UTILIZATION (2022)
Application of back propagation neural network to the modeling of slump and compressive strength of composite geopolymers
Fenglan Kuang et al.
COMPUTATIONAL MATERIALS SCIENCE (2022)
Development of drying shrinkage model for alkali-activated slag concrete
Zhihua Ou et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Rheological, fresh, and mechanical properties of mechanochemically activated geopolymer grout: A comparative study with conventionally activated geopolymer grout
Mukhtar Hamid Abed et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Properties of additively manufactured geopolymer incorporating mineral wollastonite microfibers
Shin Hau Bong et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Modeling the Drying Shrinkage of Cement Paste Prepared with Wastewater
Y. K. Kong et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)
Performance of Fiber-Reinforced Alkali-Activated Mortar with/without Nano Silica and Nano Alumina
Mahmood Hunar Dheyaaldin et al.
SUSTAINABILITY (2022)
Infilled cementitious composites (ICC) - A comparative life cycle assessment with UHPC
Y. K. Kong et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Prediction of rapid chloride penetration resistance of metakaolin based high strength concrete using light GBM and XGBoost models by incorporating SHAP analysis
Anas Abdulalim Alabdullah et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Mechanisms of inorganic salts on Ca(OH)2-activated ground granulated blast-furnace slag curing under different temperatures
Qi Zhai et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Machine learning in concrete science: applications, challenges, and best practices
Zhanzhao Li et al.
NPJ COMPUTATIONAL MATERIALS (2022)
Understanding the workability of alkali-activated phosphorus slag pastes: Effects of alkali dose and silicate modulus on early-age hydration reactions
Ruiquan Jia et al.
CEMENT & CONCRETE COMPOSITES (2022)
Advantages and disadvantages of PVA-fibre-reinforced slag- and fly ash-blended geopolymer composites: Engineering properties and microstructure
Ziming Deng et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Influencing factors analysis and optimized prediction model for rheology and flowability of nano-SiO2 and PVA fiber reinforced alkali-activated composites
Peng Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Recycling of calcined carbonated cement pastes as cementitious materials: Proposed CCUS technology for calcium looping
Y. K. Kong et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)
Applying a meta-heuristic algorithm to predict and optimize compressive strength of concrete samples
Lei Sun et al.
ENGINEERING WITH COMPUTERS (2021)
Machine learning to predict properties of fresh and hardened alkali-activated concrete
Eslam Gomaa et al.
CEMENT & CONCRETE COMPOSITES (2021)
Predicting shrinkage of alkali-activated blast furnace-fly ash mortars using artificial neural network (ANN)
Elijah Adesanya et al.
CEMENT & CONCRETE COMPOSITES (2021)
Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation
Yubin Cao et al.
COMPOSITES PART B-ENGINEERING (2021)
UHPC evolution, development, and utilization in construction: a review
M. A. Bajaber et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture
Yazan Alrefaei et al.
CEMENT & CONCRETE COMPOSITES (2021)
Modelling fresh and hardened properties of self-compacting concrete containing supplementary cementitious materials using reactive moduli
Tianyu Xie et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effect of sodium hydroxide concentration on strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar
Adeshina Adewale Adewumi et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials
Mehdi Chougan et al.
MATERIALS & DESIGN (2021)
Machine learning models for predicting the residual value of heavy construction equipment: An evaluation of modified decision tree, LightGBM, and XGBoost regression
Ali Shehadeh et al.
AUTOMATION IN CONSTRUCTION (2021)
Development of Infilled Cementitious Composites (ICC)
S. H. Chu
COMPOSITE STRUCTURES (2021)
Natural Fibers as an Alternative to Synthetic Fibers in Reinforcement of Geopolymer Matrices: A Comparative Review
Afonso R. G. de Azevedo et al.
POLYMERS (2021)
Multi-technical characterization and correlations between properties of standard cured alkali-activated high-calcium FA binders with GGBS as additive
Weilong Song et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Comparative study on the effect of fiber type and content on the performance of one-part alkali-activated mortar
Syed Farasat Ali Shah et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Compressive and tensile strength fracture models for heavyweight geopolymer concrete
Fatemeh Hamidi et al.
ENGINEERING FRACTURE MECHANICS (2020)
Predicting Hard Rock Pillar Stability Using GBDT, XGBoost, and LightGBM Algorithms
Weizhang Liang et al.
MATHEMATICS (2020)
Improvement of early strength of fly ash-slag based one-part alkali activated mortar
Syed Farasat Ali Shah et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Development of sustainable alkali-activated slag grout for preplaced aggregate concrete
Murat Tuyan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Four-layer perceptron approach for strength prediction of UHPC
Joaquin Abellan-Garcia
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effective extrusion-based 3D printing system design for cementitious-based materials
Abdulrahman Albar et al.
RESULTS IN ENGINEERING (2020)
The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes
Yazan Alrefaei et al.
CEMENT & CONCRETE COMPOSITES (2019)
Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature
Hani Alanazi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators
Sajjad Yousefi Oderji et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effects of mix design parameters on heat of geopolymerization, set time, and compressive strength of high calcium fly ash geopolymer
Yifeng Ling et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete
Mohammed Ibrahim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Alkali-activated natural pozzolan/slag mortars: A parametric study
Meysam Najimi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature
Guohao Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume
Ali Akbar Ramezanianpour et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Setting, Strength, and Autogenous Shrinkage of Alkali-Activated Fly Ash and Slag Pastes: Effect of Slag Content
Marija Nedeljkovic et al.
MATERIALS (2018)
A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production - a review part II
Evi S. Aprianti
JOURNAL OF CLEANER PRODUCTION (2017)
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Jian Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Alkali-activated mortars: Workability and rheological behaviour
M. M. Alonso et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Understanding the drying shrinkage performance of alkali-activated slag mortars
Hailong Ye et al.
CEMENT & CONCRETE COMPOSITES (2017)
The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers
Mohsen Jafari Nadoushan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Assessing the porosity and shrinkage of alkali activated slag-fly ash composites designed applying a packing model
X. Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of curing type, silica fume fineness, and fiber length on the mechanical properties and impact resistance of UHPFRC
Hasan Sahan Arel
Results in Physics (2016)
Properties of alkali activated slag-fly ash blends with limestone addition
X. Gao et al.
CEMENT & CONCRETE COMPOSITES (2015)
Advances in understanding alkali-activated materials
John L. Provis et al.
CEMENT AND CONCRETE RESEARCH (2015)
Lowering paste volume of SCC through aggregate proportioning to reduce carbon footprint
A. K. H. Kwan et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Characterization of alkali activated slag-fly ash blends containing nano-silica
X. Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
J. G. Jang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Comparative Life Cycle Assessment of Conventional, Glass Powder, and Alkali-Activated Slag Concrete and Mortar
Mohan Jiang et al.
JOURNAL OF INFRASTRUCTURE SYSTEMS (2014)
Scalable Surface Area Characterization by Electrokinetic Analysis of Complex Anion Adsorption
Dorian A. H. Hanaor et al.
LANGMUIR (2014)
Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer
Behzad Nematollahi et al.
MATERIALS & DESIGN (2014)
Supplementary Cementitious Materials
Ruben Snellings et al.
APPLIED MINERALOLGY OF CEMENT & CONCRETE (2012)
Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O
I. Garcia-Lodeiro et al.
CEMENT AND CONCRETE RESEARCH (2011)
Composition, strength and workability of alkali-activated metakaolin based mortars
F. Pacheco-Torgal et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Kiatsuda Somna et al.
FUEL (2011)
Flow analysis of water-powder mixtures: Application to specific surface area and shape factor
M. Hunger et al.
CEMENT & CONCRETE COMPOSITES (2009)
Packing density measurement and modelling of fine aggregate and mortar
A. K. H. Kwan et al.
CEMENT & CONCRETE COMPOSITES (2009)
Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide
Keun-Hyeok Yang et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
Ye Qing et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)