☆ 4.6 Article

An Experimental and Mechanical Study of a Two-Layer, Bioinspired Seismic Isolator for Multistory Buildings

BUILDINGS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Probabilistic Incremental Dynamic Analysis for Seismic Isolation Systems through Integration with the NHERI-SimCenter Performance-Based Engineering Application

Mohammad AlHamaydeh et al.

Summary: In response to the Northridge earthquake in 1994 and the Kobe earthquake in 1995, structural designers shifted from deterministic design approaches to performance-based engineering concepts. This involved evaluating designs based on stakeholders' interests rather than engineering parameters, requiring probabilistic estimation of variables throughout the design process. The NHERI-SimCenter application framework offers generic solutions for different hazard simulation problems. Seismic isolation, a proven technique for enhancing seismic performance, necessitates careful calibration of system parameters and accounting for uncertainties through multiple simulations. This research introduces components for seismic isolation and integrates them with framework modules including uncertainty quantification and damage estimation, with an illustrative case study highlighting the impacts of this development.

BUILDINGS (2023)

添加到收藏夹

Article Construction & Building Technology

Design Optimization of a Hybrid Vibration Control System for Buildings

Basel Salaas et al.

Summary: A passive hybrid control system consisting of a base-isolation subsystem and a tuned liquid column damper system was investigated for controlling high-rise structures under seismic excitations. The systems were optimized and numerical simulations were performed, showing that the base-isolation subsystem reduces structural responses by lowering the fundamental natural frequency, while the tuned liquid column damper system protects the base-isolation subsystem and reduces its displacements. Therefore, the proposed passive hybrid control system effectively reduces the structural responses under seismic excitations.

BUILDINGS (2023)

添加到收藏夹

Article Construction & Building Technology

Study on the Basic Performance Deterioration Law and the Application of Lead Rubber Bearings under the Alternation of Aging and Seawater Erosion

Yanmin Li et al.

Summary: Lead rubber isolation bearings are commonly used to reduce the seismic responses of bridges, but they are vulnerable to aging and seawater erosion. This study conducted aging and seawater erosion cycles testing on the bearings and rubber materials, determined the rubber material parameters, and obtained the time-varying law of the bearings' basic performance. The study also investigated the impact of the degradation of the bearings on the seismic performance of offshore bridge structures.

BUILDINGS (2023)

添加到收藏夹

Article Construction & Building Technology

Direct displacement-based design approach for isolated structures equipped with supplemental fluid viscous damper

Mohtasham Mohebbi et al.

Summary: This paper extends the direct displacement-based design approach for isolated structures equipped with supplemental fluid viscous damper, showing effective performance under far-field earthquakes but unreliability under near-field earthquakes. The proposed method is validated as an effective design approach for isolated structures equipped with supplemental FVD.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Machine learning-based prediction for maximum displacement of seismic isolation systems

Hoang D. Nguyen et al.

Summary: This study developed machine learning models to predict the peak lateral displacements of seismic isolation systems. The random forest model showed the best performance, and the normalized characteristic strength was found to be the most influential variable. Furthermore, a practical analysis and comparison demonstrated the effectiveness and limitations of the developed model.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Experimental characterization and mechanical modeling of additively manufactured TPU components of innovative seismic isolators

Julia de Castro Motta et al.

Summary: This study experimentally and mechanically investigated the tensile response of 3D-printed thermoplastic polyurethane membranes, revealing their pronounced hysteresis response and stretchability.

ACTA MECHANICA (2022)

添加到收藏夹

Article Construction & Building Technology

Analysis of Seismic Isolation Performance of X-Shaped Rubber Bearings (XRBs)

Di Wu et al.

Summary: This study conducted a detailed analysis of the seismic safety performance of building structures using X-shaped rubber bearings under different seismic levels. The results showed that XRBs can effectively improve the seismic safety of buildings.

BUILDINGS (2022)

添加到收藏夹

Article Engineering, Civil

Experimental seismic performance of a base-isolated building with displacement limiters

Hongkai Du et al.

Summary: The study investigates the feasibility and effectiveness of applying displacement limiting devices to base-isolated buildings through extensive shake table tests. The results show that a proper combination of soft limiter stiffness and reserved gap can effectively limit the isolated base displacement response.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

A biomimetic sliding-stretching approach to seismic isolation

Fernando Fraternali et al.

Summary: The seismic isolator developed uses biomimetic and architectured material concepts to provide effective earthquake protection. It can be easily assembled from metallic parts and 3D-printed components, making it applicable to various scales of infrastructure and equipment without the need for heavy industry or expensive materials.

NONLINEAR DYNAMICS (2021)

添加到收藏夹

Article Engineering, Civil

Active Base Isolation of Museum Artifacts under Seismic Excitation

Ilaria Venanzi et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2020)

添加到收藏夹

Article Nuclear Science & Technology

Evaluating adaptive vertical seismic isolation for equipment in nuclear power plants

Mohammadreza Najafijozani et al.

NUCLEAR ENGINEERING AND DESIGN (2020)

添加到收藏夹

Article Engineering, Civil

Wind-resistant design and equivalent static wind load of base-isolated tall building: A case study

Zhihao Li et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Development and experimental behavior of HDR seismic isolators for low-rise residential buildings

Ingrid E. Madera Sierra et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Bio-inspired anti-vibration with nonlinear inertia coupling

Xiao Feng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Civil

Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) as base isolators for residential buildings in developing countries: The demonstration building of Pasir Badak, Indonesia

A. Calabrese et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Engineering, Geological

A sand-rubber deformable granular layer as a low-cost seismic isolation strategy in developing countries: Experimental investigation

Anastasios Tsiavos et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

State of art in the worldwide evolution of base isolation design

Antonello De Luca et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Seismic floor isolation using recycled tires for essential buildings in developing countries

Enrique Morales et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2018)

添加到收藏夹

Article Nuclear Science & Technology

Using seismic isolation to reduce risk and capital cost of safety-related nuclear structures

Ching-Ching Yu et al.

NUCLEAR ENGINEERING AND DESIGN (2018)

添加到收藏夹

Article Engineering, Civil

Seismic assessment of storey isolation on tall buildings

Davide Forcellini et al.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2018)

添加到收藏夹

Article Engineering, Civil

Structural and nonstructural performance of a seismically isolated building using stable unbonded fiber-reinforced elastomeric isolators

Niel C. Van Engelen et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2016)

添加到收藏夹

Article Engineering, Civil

An advanced numerical model of elastomeric seismic isolation bearings

Manish Kumar et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2014)

添加到收藏夹

Article Engineering, Civil

Innovative low-cost recycled rubber-fiber reinforced isolator: Experimental tests and Finite Element Analyses

Mariacristina Spizzuoco et al.

ENGINEERING STRUCTURES (2014)

添加到收藏夹

Article Engineering, Civil

Friction Model for Sliding Bearings under Seismic Excitation

Giuseppe Lomiento et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Composites

Fiber-Reinforced Nanocomposite Seismic Isolators: Design and Manufacturing

Samaneh Khanlari et al.

POLYMER COMPOSITES (2010)

添加到收藏夹

Article Mechanics

A pseudo-elastic model for loading, partial unloading and reloading of particle-reinforced rubber

A Dorfmann et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.