4.7 Article

Octahedral Pt-Ni Alloy Nanoparticles Decorated on 3D Interconnected Porous Carbon Nanosheets for Voltammetric Determination of Dihydroxybenzene Isomers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Copper-palladium alloy nanoparticles immobilized over porous carbon for voltammetric determination of dimetridazole

Pitchaimani Veerakumar et al.

Summary: In this study, the potential of biomass waste material, specifically teak leaves, as a carbon precursor in the development of sustainable electrochemical (EC) sensors was investigated. Copper-palladium alloy nanoparticles were successfully immobilized on teak leaves carbon through a microwave-carbonization process. The resulting nanocomposite exhibited excellent electrochemical performance and was used for the detection of dimetridazole.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Chemistry, Multidisciplinary

Mixed-Dimensional Pt-Ni Alloy Polyhedral Nanochains as Bifunctional Electrocatalysts for Direct Methanol Fuel Cells

Tianyu Xia et al.

Summary: Mixed-dimensional Pt-Ni alloy polyhedral nanochains were fabricated to address the unbalanced relationship between activity and stability in Pt nanocatalysts. These nanochains exhibited significantly enhanced mass activity for methanol oxidation reaction and improved stability against CO poisoning. Additionally, they achieved a higher half-wave potential for oxygen reduction reaction.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

Improving Oxygen Reduction Performance of Surface-Layer-Controlled Pt-Ni Nano-Octahedra via Gaseous Etching

Can Li et al.

Summary: This study demonstrates that selectively extracting Ni atoms from the {111} facets of Pt-Ni nano-octahedra and forming a Pt-rich shell results in a surface-engineered octahedral nanocatalyst with enhanced electro-catalytic performance. The surface-engineered sample exhibits significantly improved mass activity (approximately 1.8-fold) and specific activity (approximately 2.2-fold) for the oxygen reduction reaction compared to the unmodified counterpart. The results suggest that this surface-engineering protocol provides a promising strategy for developing novel electrocatalysts with improved catalytic features.

NANO LETTERS (2023)

Review Chemistry, Multidisciplinary

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Hongzhe He et al.

Summary: Biomass is a promising source for functional carbon materials due to its sustainability, low cost, and high carbon content. Biomass-derived carbon materials (BCMs) have attracted significant research attention, with novel structures, diverse synthesis methods, and versatile applications reported. Despite this, there has been no recent review consolidating the extensive research on BCMs. Therefore, this paper provides a comprehensive review summarizing the progress in BCMs-related research, including the types of biomass used, the structures of BCMs, synthesis strategies and conditions, versatile applications, and remaining challenges. It also outlines future directions for research on BCMs.

ADVANCED SCIENCE (2023)

Article Chemistry, Physical

Microwave-assisted synthesis of Pd-Ru-Re/f-MWCNTs nanocatalyst for efficient catalytic reduction of chromium and pesticide

Pitchaimani Veerakumar et al.

Summary: In this study, a palladium-ruthenium-rhenium colloidal particles decorated on functionalized multi-walled carbon nanotubes (Pd-Ru-Re/f-MWCNTs) nanocatalyst was synthesized via a simple microwave method. The as-synthesized nanocatalyst showed excellent catalytic activity for the degradation of chromium (VI) and imidacloprid pollutants.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

Article Engineering, Environmental

Simultaneous electrochemical determination of benzenediol compounds in environmental samples using nano architectures of hydrogen ammonium zinc molybdate layered double hydroxides integrated with carbon black modified electrode

Chelladurai Karuppiah et al.

Summary: Phenolic compounds, such as benzenediol (BD), are toxic and pose a threat to human health and the environment. This study developed a novel electrochemical sensor based on a nanocomposite of hydrogen ammonium zinc molybdate layered double hydroxide (AZnMo-LDHs) and carbon black (CB), which allows for the simultaneous detection of BD at low concentrations. The sensor has significant implications for monitoring water quality and environmental remediation.

JOURNAL OF WATER PROCESS ENGINEERING (2023)

Article Chemistry, Physical

Graphene supported Pt-Ni bimetallic nanoparticles for efficient hydrogen generation from KBH4/NH3BH3 hydrolysis

Junyan Guo et al.

Summary: The development of Pt-Ni bimetallic nanoparticles supported by partially reduced graphene oxide (prGO) provides a facile and efficient approach for sustainable hydrogen production. The catalyst exhibits excellent catalytic activity and durability, making it a promising option for hydrogen generation from alkaline solutions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Electrophoretic deposition of carbon-supported octahedral Pt-Ni alloy nanoparticle catalysts for cathode in polymer electrolyte membrane fuel cells

Thanh Duc Le et al.

Summary: The study demonstrates the advanced electrochemical catalytic activity of octahedral Pt-Ni alloyed catalyst for oxygen reduction reaction (ORR). The electrophoretic deposition (EPD) technique is used to fabricate cost-effective and highly active Pt-Ni alloy/C catalyst electrodes with higher porosity and surface roughness, achieving a superior performance in a single cell test with a maximum power density of 7.16 W/mg(Pt), 28.1% higher than that of the spray-made Pt/C conventional electrode.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Materials Science, Ceramics

One-step aromatic acids assisted synthesis of γ-Fe2O3 nanoparticles with large surface area by thermal decomposition of ferric nitrate

Q. Yu et al.

Summary: In this study, a novel and facile one-step solid-state method for the preparation of gamma-Fe2O3 nanoparticles (NPs) was developed. The addition of aromatic acids to Fe(NO3)(3)•9H(2)O led to the formation of gamma-Fe2O3 NPs and significantly influenced their morphology. The gamma-Fe2O3 NPs obtained from the trimesic acid/Fe(NO3)(3)•9H(2)O system exhibited a porous three-dimensional hierarchical structure and the largest Brunauer-Emmett-Teller surface area.

CERAMICS INTERNATIONAL (2022)

Article Nanoscience & Nanotechnology

Highly Active and Stable Large Mo-Doped Pt-Ni Octahedral Catalysts for ORR: Synthesis, Post-treatments, and Electrochemical Performance and Stability

Shlomi Polani et al.

Summary: In the past decade, advances in colloidal syntheses have allowed for better control over the morphology and surface composition of octahedral-shaped Pt-Ni alloy nanocatalysts, resulting in higher catalytic activity. However, synthetic methods for larger octahedral Pt-Ni alloy nanoparticles have been challenging to develop. In this study, the researchers successfully manipulated solvothermal synthesis reaction kinetics to tune the size of the resulting nanocatalysts. The study also provides a deeper understanding of the enhanced stability of a new class of Mo-doped Pt-Ni octahedral catalysts for the cathode of PEMFCs.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Synthesis and Design of a Highly Stable Platinum Nickel Electrocatalyst for the Oxygen Reduction Reaction

Qian Wang et al.

Summary: The study demonstrates that Pt3.2Ni nanowires exhibit the best performance in the oxygen reduction reaction, showing superior activity and stability even after a 300,000-cycle test.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Analytical

Turn -on fluorometric probe for hydroquinone and catechol based on an in situ reaction between protamine sulfate and dihydroxybenzene isomers and the formation of fluorescent polymer nanoparticles

Jinshui Liu et al.

Summary: A environmentally friendly turn-on fluorescent method for detecting HQ and CC was developed using fluorescent polymer nanoparticles synthesized by crosslinking protamine sulfate with HQ or CC in an aqueous solution. The method showed a linear relationship between fluorescence intensity and HQ or CC concentration, with detection limits of 0.21 and 0.33 mu M, and high selectivity with no interferences from common substances. This method successfully detected HQ and CC in spiked water samples with satisfactory results.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Engineering, Environmental

Biomass-derived N-doped porous carbon nanosheets for energy technologies

Satpal Singh Sekhon et al.

Summary: The research on biomass-derived PCNs and their nitrogen doping is crucial for energy conversion, and innovative green methods can improve the production efficiency and sustainability of PCNs, as well as explore suitable preparation methods in different biomasses.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Analytical

Enhanced Sensitive Electrochemical Sensor for Simultaneous Catechol and Hydroquinone Detection by Using Ultrasmall Ternary Pt-based Nanomaterial

Muhammad Arsalan et al.

Summary: A simple and effective method for synthesizing Pt-based nanoparticles was presented, showing high efficiency in the process. The novel catalyst prepared by depositing a ternary metal complex on fluorine-doped tin-oxide (FTO) displayed good electro-oxidation activity for hydroquinone and catechol. The nanomaterials were characterized and their electrochemical performance was studied, with promising results for simultaneous detection of catechol and hydroquinone in real samples.

ELECTROANALYSIS (2021)

Article Chemistry, Physical

The formation of wrapping type Pt-Ni alloy on three-dimensional carbon nanosheet for electrocatalytic oxidation of methanol

Shuyan Liu et al.

Summary: The PtNi alloy was embedded into the surface layer of three-dimensional carbon nanosheets with controlled adjustment of the alloy ratio. The electro-catalytic methanol oxidation activity and durability were improved, with the Pt-Ni/CNSs (2:1) sample exhibiting the best performance with a peak current density of 15.03 mA cm-2.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Multidisciplinary

Electrochemical Sensing Platforms of Dihydroxybenzene: Part 1-Carbon Nanotubes, Graphene, and their Derivatives

S. M. Abu Nayem et al.

Summary: This review focuses on using carbon nanotubes, graphene, and their derivatives and nanocomposites to enhance the electrocatalytic activity of conventional bare electrodes for dihydroxybenzene sensing. It summarizes reports from 2011-2020 on the detection of different dihydroxybenzenes and highlights the challenges and prospects surrounding the sensitive and selective detection of dihydroxybenzene.

CHEMICAL RECORD (2021)

Article Chemistry, Physical

Scalable synthesis of strutted nitrogen doped hierarchical porous carbon nanosheets for supercapacitors with both high gravimetric and volumetric performances

Chong Chen et al.

Summary: In this study, porous carbon nanosheets with high specific surface area and rich surface heteroatoms were successfully synthesized, leading to high gravimetric/volumetric capacitance and energy density of the supercapacitor. This work provides a new strategy for the mass production of high-performance carbon nanosheets for energy storage.

CARBON (2021)

Article Electrochemistry

Emb e dding Pt-Ni octahedral nanoparticles in the 3D nitrogen-doped porous graphene for enhanced oxygen reduction activity

Rui Lin et al.

Summary: 3D graphene is a promising support for oxygen reduction reaction (ORR) electrocatalysts due to its better corrosion resistance and higher mechanical strength. Nitrogen-doped porous graphene (NPG) has been developed to support Pt-Ni octahedral nanoparticles (NPs), showing enhanced mass activity (MA) and durability compared to commercial Pt/C.Pt-based octahedral catalyst supported on NPG is expected to be applied to proton exchange membrane fuel cells (PEMFCs) due to its improved performance.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

Efficient Electrochemical Determination of Catechol with Hydroquinone at Poly (L-Serine) Layered Carbon Paste Electrode

Bekya T. Harshitha et al.

Summary: In this study, a poly(L-serine) modified carbon paste electrode (PLSMCPE) was fabricated through electropolymerization for the electrochemical analysis of catechol (CC). The PLSMCPE showed nine-fold enhancement in peak current and good linear correlation between the concentration of CC and the oxidation peak current, with a LOD of 0.259 mu M and LOQ of 0.869 mu M. Additionally, the modified electrode was successful in analyzing the presence of CC in coffee powder samples.

CHEMISTRYSELECT (2021)

Article Chemistry, Multidisciplinary

In Situ X-ray Absorption Spectroscopy of PtNi-Nanowire/Vulcan XC-72R under Oxygen Reduction Reaction in Alkaline Media

Joesene Soto-Perez et al.

Summary: Studying the ORR in alkaline electrolytes with PtNi-NWs catalysts has shown promising catalytic responses. PtNi-NWs/V exhibited the highest specific activity and half-wave potential, suggesting their potential as active catalysts for ORR. In situ X-ray absorption spectroscopy results indicated alloy formation between Pt and Ni in PtNi-NWs catalysts, providing insights into their catalytic performance in alkaline electrolytes.

ACS OMEGA (2021)

Article Chemistry, Analytical

A three-electrode integrated electrochemical platform based on nanoporous gold for the simultaneous determination of hydroquinone and catechol with high selectivity

Fanggen Wu et al.

Summary: A novel three-electrode integrated electrochemical platform (TEIEP) was designed for the simultaneous detection of hydroquinone (HQ) and catechol (CC). The platform exhibited high selectivity and sensitivity, with linear detection ranges and low detection limits for HQ and CC. The TEIEP showed promising applications for on-site environmental monitoring.

ANALYST (2021)

Article Chemistry, Multidisciplinary

Fabrication of Platinum-Rhenium Nanoparticle-Decorated Porous Carbons: Voltammetric Sensing of Furazolidone

Pitchaimani Veerakumar et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Nanoscience & Nanotechnology

High-Index Core-Shell Ni-Pt Nanoparticles as Oxygen Reduction Electrocatalysts

Gerard M. Leteba et al.

ACS APPLIED NANO MATERIALS (2020)

Article Materials Science, Biomaterials

Use of the monodisperse Pt/Ni@rGO nanocomposite synthesized by ultrasonic hydroxide assisted reduction method in electrochemical nonenzymatic glucose detection

Rukiye Ayranci et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Nanoscience & Nanotechnology

Platinum-Nickel Bimetallic Nanosphere-Ionic Liquid Interface for Electrochemical Oxygen and Hydrogen Sensing

Xiaojun Liu et al.

ACS APPLIED NANO MATERIALS (2019)

Article Chemistry, Multidisciplinary

Highly sensitive sensing of hydroquinone and catechol based on -cyclodextrin-modified carbon dots

Zhong-Yi Lin et al.

RSC ADVANCES (2018)

Review Chemistry, Physical

An Overview of Metal Acetylacetonates: Developing Areas/Routes to New Materials and Applications in Organic Syntheses

Ravinderpal Kour Sodhi et al.

CATALYSIS SURVEYS FROM ASIA (2018)

Article Nanoscience & Nanotechnology

Popcorn-Derived Porous Carbon Flakes with an Ultrahigh Specific Surface Area for Superior Performance Supercapacitors

Jianhua Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Multidisciplinary Sciences

High-performance transition metal-doped Pt3Ni octahedra for oxygen reduction reaction

Xiaoqing Huang et al.

SCIENCE (2015)

Article Chemistry, Multidisciplinary

A rational design of carbon-supported dispersive Pt-based octahedra as efficient oxygen reduction reaction catalysts

Xiaoqing Huang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Preparation of graphitic mesoporous carbon for the simultaneous detection of hydroquinone and catechol

Xiaoli Yuan et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2013)

Article Chemistry, Multidisciplinary

Organic small molecule-assisted synthesis of high active TiO2 rod-like mesocrystals

Li Li et al.

CRYSTENGCOMM (2010)

Article Chemistry, Multidisciplinary

Hydrogen Adsorption on Ordered Mesoporous Carbons Doped with Pd, Pt, Ni, and Ru

Dipendu Saha et al.

LANGMUIR (2009)

Article Agriculture, Multidisciplinary

Direct automatic determination of bitterness and total phenolic compounds in virgin olive oil using a pH-based flow-injection analysis system

Jose A. Garcia-Mesa et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2007)