☆ 4.7 Article

Influence of nanofluids on the thermal performance and entropy generation of varied geometry microchannel heat sink

CASE STUDIES IN THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Mathematical modeling and multi-objective optimization on the rectangular micro-channel heat sink

Xue-shuo Shang et al.

Summary: This study develops a mathematical model of a rectangular microchannel heat sink (MCHS) and derives the thermal resistance using structural parameters based on the differential equation of energy conservation. Both experimental and numerical methods are employed to validate the model. A multiobjective optimization model is also established to simultaneously minimize the thermal resistance and the pumping power. The mathematical model and the multiobjective optimization method are beneficial for the design of an MCHS owing to the high convenience and reliability.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

添加到收藏夹

Article Thermodynamics

Performance enhancement in double-layer tapered microchannels by changing the wall hydrophobicity and working fluid

Sajjad Sarvar-Ardeh et al.

Summary: This research numerically investigates the effects of hybrid nanofluid flows, converging channels, and superhydrophobic surfaces in a double-layer microchannel heat sink. The results show that at low Re numbers, the hybrid nanofluid in the superhydrophobic microchannel can reduce thermal resistance, but at high Re numbers, the situation is reversed due to higher temperature jumps at the wall contact surfaces.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Impact of MXene nanoparticle on thermohydraulic performance in a microchannel heat sink: effect of nanoparticle size

Mohamad Nur Hidayat Mat et al.

Summary: This study proposes the use of MXene nanoparticles in a microchannel, and evaluates their thermohydraulic performance by varying the nanoparticle size. The results show that MXene nanofluids with a diameter of 20 nm have the lowest thermal resistance and highest heat transfer coefficient at high Reynolds numbers, and only slightly increase the pressure drop.

MICROFLUIDICS AND NANOFLUIDICS (2023)

添加到收藏夹

Review Energy & Fuels

Experiments on Single-Phase Nanofluid Heat Transfer Mechanisms in Microchannel Heat Sinks: A Review

Pinar Eneren et al.

Summary: This article reviews the research on heat transfer enhancement using nanofluids in microchannel heat sinks over the past 20 years. It discusses the stability, thermal conductivity, particle clustering, and particle-surface interactions of nanofluids, as well as the relevant works on convective heat transfer in microchannel heat sinks operated with nanofluids.

ENERGIES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A High Thermal Conductivity of MgO-H2O Nanofluid Prepared by Two-Step Technique

Hadia Kadhim Judran et al.

Summary: This study aims to investigate the impact of nanopowder volume concentration and ultrasonication treatment time on the stability and thermophysical properties of MgO-DW nanofluid at room temperature. The results show that nanofluid exhibits good stability and enhanced thermal conductivity at an appropriate concentration and treatment time. These findings suggest that MgO-DW nanofluid has the potential to be used as an advanced heat transfer fluid in cooling systems and heat exchangers.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Chemistry, Analytical

A Numerical Investigation on Hydrothermal Performance of Micro Channel Heat Sink with Periodic Spatial Modification on Sidewalls

Nikita Kumari et al.

Summary: This study investigates a novel design of microchannel heat sink (MCHS) and explores the impact of different surface modifications on heat transfer performance. The results demonstrate that geometric modifications significantly enhance the cooling capacity, highlighting the importance of effective thermal management for electronic devices.

MICROMACHINES (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of Dimpled Rib with Arc Pattern on Hydrothermal Characteristics of Al2O3-H2O Nanofluid Flow in a Square Duct

Anil Kumar et al.

Summary: This study focused on the thermal and hydraulic performance of Al2O3-H2O nanofluid flow in a dimpled rib with an arc pattern in a square duct. The results showed that the nanofluid had higher Nusselt numbers and friction factors compared to pure water. The dimpled ribs in the arc pattern significantly improved the heat transfer rate. The optimum parameters were a nanoparticle concentration of 4.5%, a ratio of dimpled arc rib height to print diameter of 0.933, a relative dimpled arc rib height of 4.64, and a dimpled arc angle of 55 degrees. Correlations for Nusselt number, friction factor, and efficiency factor were developed for the selected range of parameters.

SUSTAINABILITY (2022)

添加到收藏夹

Article Energy & Fuels

Impact on Heat Transfer Rate Due to an Extended Surface on the Passage of Microchannel Using Cylindrical Ribs with Varying Sector Angle

Ayush Prada Dash et al.

Summary: In this study, the impact of an extended surface on the heat transfer rate in a microchannel was investigated using computer simulation. A new design of a microchannel heat sink incorporating cylindrical ribs with variable sector angles was analyzed. The results showed that the Nusselt number and THPP parameter varied with the Reynolds number and sector angle. The study provides insights into the performance and optimization of microchannel heat sinks.

ENERGIES (2022)

添加到收藏夹

Article Chemistry, Physical

Analysis of Microchannel Heat Sink of Silicon Material with Right Triangular Groove on Sidewall of Passage

Surojit Saha et al.

Summary: Microchannel heat sink is a promising solution for removing excess heat from electronic components. A numerical study showed that a microchannel with a 15 degrees groove angle has the best heat transfer and thermohydraulic performance.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Second law analysis of recharging microchannel using entropy generation minimization method

Sangram Kumar Samal et al.

Summary: This study focuses on the numerical analysis of entropy generation in recharging and simple microchannels, revealing that increasing the number of small channels, channel aspect ratio, and substrate material thermal conductivity can reduce thermal entropy generation, while increasing substrate thickness, channel wall width, and applied heat flux can increase thermal entropy generation.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Chemical

Hydrothermal and entropy generation specifications of a hybrid ferronanofluid in microchannel heat sink embedded in CPUs

Amin Shahsavar et al.

Summary: This numerical work evaluates the performance of a hybrid nanofluid in a liquid-cooled microchannel heatsink, showing that higher Fe3O4 and CNT concentrations and Reynolds number lead to increased convective heat transfer coefficient and pumping power, while decreasing CPU surface temperature and thermal resistance, resulting in a more uniform temperature distribution.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Pumping power and heat transfer efficiency evaluation on Al2O3, TiO2 and SiO2 single and hybrid water-based nanofluids for energy application

Alina Adriana Minea

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Review Thermodynamics

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review

Yousef Alihosseini et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer and pressure drop characteristics of MgO nanofluid in a double pipe heat exchanger

H. Arya et al.

HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Review Thermodynamics

Optimization of thermal design of heat sinks: A review

Hamdi E. Ahmed et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Numerical investigation and performance analyses of rectangular mini channel with different types of ribs and their arrangements

Ramin Rezazadeh et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Entropy generation of nanofluid flow in a microchannel heat sink

Eyuphan Manay et al.

RESULTS IN PHYSICS (2018)

添加到收藏夹

Review Energy & Fuels

A Review on efficient thermal management of air- and liquid-cooled data centers: From chip to the cooling system

Ali Habibi Khalaj et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Influence of geometric parameters on flow and heat transfer performance of micro-channel heat sinks

Hongtao Wang et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Entropy generation analysis of a nanofluid flow in MHD porous microchannel with hydrodynamic slip and thermal radiation

Guillermo Ibanez et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

OPTIMIZATION OF NANOFLUID-COOLED MICROCHANNEL HEAT SINK

Ahmed Mohammed Adham et al.

THERMAL SCIENCE (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical optimization of microchannel heat sink (MCHS) geometry cooled by different nanofluids using RSM analysis

M. Rahimi-Gorji et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2015)

添加到收藏夹

Review Thermodynamics

A review of entropy generation in microchannels

Mohamed M. Awad

ADVANCES IN MECHANICAL ENGINEERING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

CFD modeling of heat transfer performance of MgO-water nanofluid under turbulent flow

Reza Davarnejad et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2015)

添加到收藏夹

Article Thermodynamics

Optimization of thermal performances and pressure drop of rectangular microchannel heat sink using aqueous carbon nanotubes based nanofluid

Salma Halelfadl et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

An experimental study on thermal performance of Al2O3/water nanofluid in a minichannel heat sink

C. J. Ho et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

Article Physics, Multidisciplinary

Numerical Study of Entropy Generation in a Flowing Nanofluid Used in Micro- and Minichannels

Mohammadreza Hassan et al.

ENTROPY (2013)

添加到收藏夹

Article Thermodynamics

Analysis of entropy generation using nanofluid flow through the circular microchannel and minichannel heat sink

M. R. Sohel et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Application of nanofluids in computer cooling systems (heat transfer performance of nanofluids)

M. Rafati et al.

APPLIED THERMAL ENGINEERING (2012)

添加到收藏夹

Article Thermodynamics

Optimization of an ammonia-cooled rectangular microchannel heat sink using multi-objective non-dominated sorting genetic algorithm (NSGA2)

Ahmed Mohammed Adham et al.

HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Analysis of entropy generation and convective heat transfer of Al2O3 nanofluid flow in a tangential micro heat sink

Amir Shalchi-Tabrizi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Second law analysis of nanofluid flow

Mostafa Moghaddami et al.

ENERGY CONVERSION AND MANAGEMENT (2011)

添加到收藏夹

Article Thermodynamics

A critical synthesis of thermophysical characteristics of nanofluids

Khalil Khanafer et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

添加到收藏夹

Article Thermodynamics

Thermal and Hydraulic Performance of Counterflow Microchannel Heat Exchangers With and Without Nanofluids

Hamid Reza Seyf et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Article Thermodynamics

A NUMERICAL STUDY ON THE FORCED CONVECTION OF LAMINAR NANOFLUID IN A MICROCHANNEL WITH BOTH SLIP AND NO-SLIP CONDITIONS

A. Raisi et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancement of heat transfer and entropy generation analysis of nanofluids turbulent convection flow in square section tubes

Vincenzo Bianco et al.

NANOSCALE RESEARCH LETTERS (2011)

添加到收藏夹

Article Thermodynamics

The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes

P. Gunnasegaran et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Investigation of a nanofluid-cooled microchannel heat sink using Fin and porous media approaches

Mohammad Ghazvini et al.

ENERGY CONVERSION AND MANAGEMENT (2009)

添加到收藏夹

Review Thermodynamics

Review of convective heat transfer enhancement with nanofluids

Sadik Kakac et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

添加到收藏夹

Article Thermodynamics

Nanofluids: From Vision to Reality Through Research

Stephen U. S. Choi

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)

添加到收藏夹

Article Engineering, Electrical & Electronic

Pressure drop and heat transfer of Al2O3-H2O nanofluids through silicon microchannels

Xinyu Wu et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)

添加到收藏夹

Article Thermodynamics

Entropy generation analysis in a uniformly heated microchannel heat sink

H. Abbassi

ENERGY (2007)

添加到收藏夹

Article Thermodynamics

Determining local values of the heat transfer coefficient on a fin surface

T. Orzechowski

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)

添加到收藏夹

Article Thermodynamics

Analysis of microchannel heat sink performance using nanofluids

RY Chein et al.

APPLIED THERMAL ENGINEERING (2005)

添加到收藏夹

Article Thermodynamics

Analysis and optimization of the thermal performance of microchannel heat sinks

D Liu et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2005)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of nanofluids

YM Xuan et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.