☆ 4.7 Article

Investigating the Fabrication of Perovskite Solar Cells by Ultrasonic Spray Coating: A Design of Experiments Approach

ACS APPLIED ENERGY MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Binary Solvent System Used to Fabricate Fully Annealing-Free Perovskite Solar Cells

Elena J. J. Cassella et al.

Summary: Solvent-engineered deposition of high crystalline perovskite thin-films at room temperature using gas-quenching method has been achieved, leading to the fabrication of annealing-free perovskite solar cells (PSCs) with stabilized power conversion efficiencies (PCEs) up to 18.0%. Self-assembled molecules have been used as the hole-transporting layer, further improving the stabilized PCEs of annealing-free devices to 17.1%. This study provides a new approach for large-scale production of annealing-free PSCs.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Article Engineering, Chemical

Solvent engineering towards scalable fabrication of high-quality perovskite films for efficient solar modules

Zhaoyi Jiang et al.

Journal of Energy Chemistry (2023)

添加到收藏夹

Article Chemistry, Physical

Pyrene Core-based Dopant-free Hole Transporting Materials for Perovskite Solar Cells: A Theoretical Design and Experimental Verification

Hongyuan Liu et al.

Summary: This study successfully constructed an efficient triphenylamine-based HTM (HY4) and demonstrated its potential in improving the performance of PSCs. The introduced fused aromatic core in HY4 enhances molecular stacking effects, reduces reorganization energy in hole transfer, leading to excellent performance in electron energy levels, charge carrier mobility, film morphology, and hole extraction capability.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Gas-Assisted Spray Coating of Perovskite Solar Cells Incorporating Sprayed Self-Assembled Monolayers

Elena J. Cassella et al.

Summary: Self-assembled monolayers (SAMs) are widely used as hole-selective layers in perovskite solar cells. Ultrasonic spray coating and airbrush coating are effective methods for depositing carbazole-based SAMs. Solvent rinsing protocols overcome the dewetting issue of hybrid perovskite precursor solutions. Air-knife gas-quenching is used to remove volatile solvents, allowing fabrication of high-efficiency p-i-n devices with large-area roll-to-roll manufacturing.

ADVANCED SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Defects and stability of perovskite solar cells: a critical analysis

Leiping Duan et al.

Summary: Metal halide perovskite solar cells have achieved power conversion efficiencies exceeding 25.5%, similar to silicon solar cells, but their stability remains a challenge for commercialization due to degradation from external factors. Encapsulation can suppress degradation from oxygen and moisture, however, light and heat-induced degradation are still issues that need to be addressed for improved stability.

MATERIALS CHEMISTRY FRONTIERS (2022)

添加到收藏夹

News Item Multidisciplinary Sciences

WHAT THE WAR IN UKRAINE MEANS FOR ENERGY, CLIMATE AND FOOD

Jeff Tollefson

Summary: Russia's invasion has resulted in a temporary increase in prices, but it could potentially drive a long-term shift towards sustainability.

NATURE (2022)

添加到收藏夹

Article Energy & Fuels

Recent Progress on Metal Halide Perovskite Solar Minimodules

Zhichun Yang et al.

Summary: The rapid development of perovskite solar cells in the past decade has made them a promising competitor in the PV market due to their efficiency. To further practical application, PSCs need to be manufactured into module scale. Recent research has focused on demonstrations and improvements of perovskite solar modules, with minimodules being recognized as a desirable model for study.

SOLAR RRL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Critical Role of Perovskite Film Stoichiometry in Determining Solar Cell Operational Stability: a Study on the Effects of Volatile A-Cation Additives

Wenya Song et al.

Summary: This study investigates the influence of volatile A-cation halide additives on the stoichiometry, performance, and stability of perovskite films in solar cells. The results show that over annealing of formamidinium chloride-containing perovskite films leads to a Pb-rich surface, resulting in a high initial efficiency but decays during maximum power point tracking (MPPT). On the other hand, perovskite films obtained by a shorter annealing time at the same temperature provide good stability during MPPT but a lower initial efficiency. Therefore, optimal annealing conditions are crucial for both high efficiency and operational stability in perovskite solar cells.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Environmental Studies

Impact of Russian-Ukraine war on clean energy, conventional energy, and metal markets: Evidence from event study approach

Muhammad Umar et al.

Summary: This article discusses the impact of the Russian-Ukraine war on the metals, conventional energy, and renewable energy markets. The event research technique used in this study shows a significant increase in abnormal returns associated with the renewable energy industry. Other than the gas oil index, conventional energy and metals markets do not show large abnormal returns on the event day. Europe was one of the first clean energy markets to react to the war. The impact was highest on the t+1 day, unlike in other markets. War had a significant influence on gold, platinum, palladium, and nickel, among other metals.

RESOURCES POLICY (2022)

添加到收藏夹

Review Crystallography

Annealing Engineering in the Growth of Perovskite Grains

Lan Wang et al.

Summary: This article discusses the challenges and quality issues in the growth of perovskite crystals in perovskite solar cells (PSCs), as well as the relationship between annealing driving force and crystal growth. The main annealing methods are categorized into physical and chemical annealing, and their effects on photovoltaic performance are summarized. The growth mechanisms of thin films under different annealing methods are also discussed. Finally, future perspectives and trends in the industrial fabrication of PSCs are suggested.

CRYSTALS (2022)

添加到收藏夹

Article Physics, Applied

A study of quenching approaches to optimize ultrasonic spray coated perovskite layers scalable for PV

Joao Silvano et al.

Summary: This paper investigates ultrasonically spray coated perovskite layers for photovoltaic applications, with a particular focus on the quenching-assisted crystallization step. By introducing different quenching techniques, large-scale production of perovskite solar cells with improved efficiency can be achieved.

EPJ PHOTOVOLTAICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating the experimental space for two-step Cu(In,Ga)(S,Se)2 absorber layer fabrication: A design of experiment approach

Sarallah Hamtaei et al.

Summary: This study identified several significant parameters that have the most impact on the properties of Cu(In,Ga)(S,Se)(2) absorbers and potential high-performing solar cells through a one-variable-at-a-time approach. By analyzing these parameters and their impact on key metrics, it was possible to constrain the vast processing window and make optimization feasible for future endeavors.

THIN SOLID FILMS (2021)

添加到收藏夹

Review Chemistry, Physical

Upscaling Solution-Processed Perovskite Photovoltaics

Fu Yang et al.

Summary: This review summarized the progress and challenges of scalable technologies for solution-based coating and printing of perovskite PVs, including high-quality preparation, selection and deposition of charge extraction layers and electrodes, as well as proposed strategies and opportunities to promote the development of stable and efficient large-area perovskite PVs towards commercialization.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Compositional Investigation for Bandgap Engineering of Wide Bandgap Triple Cation Perovskite

Jacopo Sala et al.

Summary: This research focused on exploring the tunability of bandgap in perovskite solar cells for multijunction applications, achieving a champion efficiency of 18.3% with a bandgap of 1.67 eV through cation engineering.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Progress of Perovskite Solar Modules

Hyung-Joon Kim et al.

Summary: Perovskite solar cells achieved a certified power conversion efficiency of 25.5% in 2020, driving the development of scalable technologies. While the performance of solar modules lags behind, scalable technologies are advancing and introducing environmental-friendly measures.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Using design of experiment to obtain a systematic understanding of the effect of synthesis parameters on the properties of perovskite nanocrystals

Robert W. Baker et al.

Summary: Lead halide perovskite nanocrystals have promising optoelectronic applications, with properties that can be tuned by changing synthesis conditions. A design of experiment approach was used to study eight factors in a screening study, focusing on five factors in a refined study. An empirical model was developed to understand the effects of these factors, allowing control over the photoluminescence peak position from 614 to 737 nm. This model provided greater insight into nanocrystal morphology and stability.

REACTION CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

How to Report Record Open-Circuit Voltages in Lead-Halide Perovskite Solar Cells

Lisa Krueckemeier et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Highly efficient and rapid manufactured perovskite solar cells via Flash InfraRed Annealing

Sandy Sanchez et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

Semitransparent Perovskite Solar Cells

Stay Rahmany et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Antisolvents in Perovskite Solar Cells: Importance, Issues, and Alternatives

Subrata Ghosh et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Optical in situ monitoring during the synthesis of halide perovskite solar cells reveals formation kinetics and evolution of optoelectronic properties

Klara Suchan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Controlling Carrier Type and Concentration in NiO Films To Enable in Situ PN Homojunctions

Maria Isabel Pintor-Monroy et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Efficiency Improvement of Near-Stoichiometric CuInSe2 Solar Cells for Application in Tandem Devices

Thomas Feurer et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

How To Optimize Materials and Devices via Design of Experiments and Machine Learning: Demonstration Using Organic Photovoltaics

Bing Cao et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid route to efficient, scalable, and robust perovskite photovoltaics in air

Florian Hilt et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Editorial Material Chemistry, Physical

Hysteresis Index: A Figure without Merit for Quantifying Hysteresis in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Spray-Cast Multilayer Organometal Perovskite Solar Cells Fabricated in Air

David K. Mohamad et al.

Advanced Energy Materials (2016)

添加到收藏夹

Article Chemistry, Physical

Rapid composition screening for perovskite photovoltaics via concurrently pumped ultrasonic spray coating

J. G. Tait et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Principles of Chemical Bonding and Band Gap Engineering in Hybrid Organic-Inorganic Halide Perovskites

Aron Walsh

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystallization Kinetics of Organic-Inorganic Trihalide Perovskites and the Role of the Lead Anion in Crystal Growth

David T. Moore et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing

Sanjib Das et al.

ACS PHOTONICS (2015)

添加到收藏夹

Article Biochemical Research Methods

Fiji: an open-source platform for biological-image analysis

Johannes Schindelin et al.

NATURE METHODS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Influence of oxygen content on electrical properties of NiO films grown by rf reactive sputtering for resistive random-access memory applications

Jae-Wan Park et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.