☆ 4.7 Article

Electrical resistance-based self-monitoring of manufacturing damage in 3D printed continuous carbon fiber reinforced composites

COMPOSITES COMMUNICATIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Nonlinear behavior mechanism of change in electrical resistance on 3D printed carbon fiber/PA6 composites during cyclic tests

Keisuke Iizuka et al.

Summary: The aim of this research is to investigate the cause of nonlinear behavior mechanism of change in electrical resistance of 3D printed CFRP due to tensile loading. The surface treatments and test speeds are found to affect the electrical resistance change.

ADVANCED COMPOSITE MATERIALS (2023)

添加到收藏夹

Review Engineering, Multidisciplinary

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

Ping Cheng et al.

Summary: This paper reviewed the state-of-the-art 3D printing CFRSs and elaborated their future perspectives and potential applications. Different existing CFRSs printing techniques were reviewed, and the limitations of current processing methods were discussed in details. The mechanical properties and novel applications in shape morphing and self-monitoring of CFRSs were presented.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Mechanics

Investigation of influence of printing parameters on the quality of 3D printed composite structures

Marius Rimasauskas et al.

Summary: Composites reinforced with carbon fibers are widely used and additive manufacturing technologies have allowed for printing complex shapes with reduced costs. Achieving minimum void volume and high fiber content is crucial for aerospace applications, but it is challenging in polymer-fiber composites. Understanding how printing parameters influence properties is key to improving mechanical characteristics. Tensile properties of 3D printed composites were studied with varying layer height and line width, showing significant impact on void volume and carbon fiber content fluctuation. Optimization of composite properties is possible through adjusting 3D printing parameters.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Mechanical and self-sensing properties of 3D printed continuous carbon fiber reinforced composites

Wenguang Ye et al.

Summary: The study investigates the additive manufacturing of continuous carbon fiber reinforced composites through fused filament fabrication using 3D printing technology. The research shows that these composites exhibit significantly higher mechanical properties compared to PLA, with the stress-strain and damage being closely correlated with the resistance change in the 3D printed structures. Furthermore, the potential application of these self-sensing composites in finger joint action recognition is discussed through experiments.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Agricultural Engineering

Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing

Ping Cheng et al.

Summary: This study aimed to investigate the mechanical properties and interfacial analysis of 3D printed continuous vegetal fiber reinforced biomass based composites. The results showed that the mechanical behaviors of the biocomposites were influenced by the interfacial properties between deposited layers and between fiber/matrix interfaces. By controlling the printing parameters, significant microstructure changes were observed in the biocomposites, leading to the highest tensile strength found at specific printing conditions.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Automation & Control Systems

Fabrication and characterization of in situ structural health monitoring hybrid continuous carbon/glass fiber-reinforced thermoplastic composite

Congcong Luan et al.

Summary: A novel method of integrating continuous carbon fibers into composite materials for in situ structural health monitoring with self-sensing capabilities was proposed. Mechanical and electrical properties of the material were investigated, demonstrating excellent performance under flexural loading.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics

Hirohide Shiratori et al.

ADVANCED COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

Congcong Luan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Composites

Design of composite lattice materials combined with fabrication approaches

Jun Xu et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Analytical

Self-Sensing of Position-Related Loads in Continuous Carbon Fibers-Embedded 3D-Printed Polymer Structures Using Electrical Resistance Measurement

Congcong Luan et al.

SENSORS (2018)

添加到收藏夹

Article Chemistry, Physical

Self-monitoring continuous carbon fiber reinforced thermoplastic based on dual-material three-dimensional printing integration process

Congcong Luan et al.

CARBON (2018)

添加到收藏夹

Article Instruments & Instrumentation

A nanometallic nickel-coated, glass-fibrebased structural health monitoring system for polymer composites

R. Balaji et al.

SMART MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring

Xinhua Yao et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Mechanics

A novel strengthening method for carbon fiber composite lattice truss structures

Qianqian Wu et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Manufacturing

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

Xiaoyong Tian et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compression properties of novel thermoplastic carbon fibre and poly-ethylene terephthalate fibre composite lattice structures

C. Schneider et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Physical

Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors

J. Sebastian et al.

CARBON (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Characteristics of carbon fiber based strain sensors for structural-health monitoring of textile-reinforced thermoplastic composites depending on the textile technological integration process

E. Haentzsche et al.

SENSORS AND ACTUATORS A-PHYSICAL (2013)

添加到收藏夹

Article Chemistry, Physical

Electrical properties of different types of carbon fiber reinforced plastics (CFRPs) and hybrid CFRPs

C. Q. Yang et al.

CARBON (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.