☆ 4.7 Article

Dissolution Modulation of Formamidinium-Based Perovskite for Regulated Crystallinity in Printable Mesoscopic Solar Cells

SOLAR RRL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Advances in the Synthesis of Halide Perovskite Single Crystals for Optoelectronic Applications

Jiakai Yan et al.

Summary: Perovskite materials have garnered significant attention for their applications in optoelectronics such as solar cells, LEDs, and photodetectors. Single crystal perovskites, with their absence of grain boundaries and lower defect density, exhibit enhanced performance and stability in optoelectronic devices. Additionally, single crystal nanostructures serve as ideal models for studying the fundamental properties of functional materials. This review comprehensively discusses the theories of crystal nucleation and growth, explores the formation of perovskite crystals, and summarizes recent advancements in their application across various optoelectronic devices.

CHEMISTRY OF MATERIALS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics

Hong Zhang et al.

Summary: This article introduces an eco-friendly and cost-effective strategy for fabricating high-efficiency perovskite solar cells, which involves diluting perovskite precursors with a high volatility co-solvent to reduce toxic waste and material cost. The strategy is universally successful across different perovskite compositions, potentially facilitating the translation of perovskite technologies from lab to fab.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Qiaojiao Gao et al.

Summary: This article discusses the preparation process and methods of halide perovskite crystals, including nanocrystals, single crystals, and thin films. High-performance devices rely on high crystal quality. The supersaturation of the solution determines the proportion and energy changes of aggregation, while nucleation and crystal growth processes determine crystal quality.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Inhibition of Amine-Water Proton Exchange Stabilizes PerovskiteInk for Scalable Solar Cell Fabrication

Erin G. Moloney et al.

Summary: In this study, we found that the perovskite ink used degrades easily in ambient air, but can be stabilized by adding elemental sulfur, making it suitable for solar cell fabrication. After a certain aging period, the stabilized sulfur-containing ink can be used to produce high-efficiency solar cell devices.

CHEMISTRY OF MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Precursor Engineering for Solution Method-Grown Spectroscopy-Grade CsPbBr3 Crystals with High Energy Resolution

Fangbao Wang et al.

Summary: A CsPbBr3 single crystal with low impurity concentration and high resistivity has been successfully prepared using an inverse temperature crystallization method and a modified precursor composition. By introducing PbBr2・2DMSO adduct in the precursor solution, the resulting crystals exhibit high hole mobility and low dark current. These crystals show excellent performance in radiation detection, achieving high peak-to-valley ratio pulse height spectra and energy resolution.

CHEMISTRY OF MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells based on screen-printed thin films

Changshun Chen et al.

Summary: Researchers have developed a new screen-printing method for fabricating perovskite solar cells, achieving high energy conversion efficiencies. This method is not affected by humidity, and the fabrication process is simple and suitable for large-scale production.

NATURE (2022)

添加到收藏夹

Article Chemistry, Physical

Exploring Nanoscale Structure in Perovskite Precursor Solutions Using Neutron and Light Scattering

Mary E. O'Kane et al.

Summary: Tailoring the solution chemistry of metal halide perovskites requires understanding precursor aggregation and coordination. In this study, various scattering techniques were used to investigate the nanostructures in two different lead-halide perovskite solution inks. It was found that DLS can misrepresent the size distribution of the colloidal dispersion, while SANS/SESANS confirmed that these solutions mainly consist of 1-2 nm-sized particles.

CHEMISTRY OF MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent Gaming Chemistry to Control the Quality of Halide Perovskite Thin Films for Photovoltaics

Xiaofeng Huang et al.

Summary: This study systematically investigates the impact of solvents on perovskite solar cells (PSCs) and reveals the relationship between solvent basicity, solvent-contained intermediate structures, and intermediate-to-perovskite alpha-FAPbI(3) evolutions. It proposes a solvent gaming mechanism that guides the selection of solvents for fabricating high-quality perovskite films and achieving high-performance PSCs and modules.

ACS CENTRAL SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Siraj Sidhik et al.

Summary: Realizing solution-processed heterostructures in halide perovskites is a long-standing challenge due to solvent incompatibilities. However, by utilizing the solvent dielectric constant and Gutmann donor number, it is possible to grow phase-pure two-dimensional (2D) halide perovskite stacks with desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. The thickness dependence of the 2D perovskite layer shows expected trends for different device architectures, indicating the influence of band alignment and carrier transport limits.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Highly oriented MAPbI 3 crystals for efficient hole-conductor-free printable mesoscopic perovskite solar cells

Shuang Liu et al.

Summary: This study presents the preparation of highly oriented MAPbI (3) perovskite crystals in a triple mesoscopic scaffold, which suppresses non-radiative recombination and promotes charge transport. The corresponding perovskite solar cells exhibit high power conversion efficiency and promising long-term operational stability.

FUNDAMENTAL RESEARCH (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent advances in perovskites-based optoelectronics

Xiaoyan Liu et al.

Summary: The research and application of perovskites contribute to the improvement and alteration of optical properties in devices, showing great potential in areas such as photoelectric conversion efficiency and thermal stability. There are promising prospects for their application in optical and electrical characteristics.

NANOTECHNOLOGY REVIEWS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Controllable metastable growth of perovskite single crystals for highly sensitive X-ray detection

Zhihao Zhu et al.

Summary: This study demonstrates a low-temperature controllable metastable crystallization (LCMC) method for preparing high-quality perovskite single crystals (SCs), which exhibit superior crystalline quality, carrier lifetime, carrier mobility, and trap density compared to traditional inverse temperature crystallization (ITC) method. The X-ray detector based on the high-quality SCs shows high sensitivity and a lowest detectable dose rate.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

添加到收藏夹

Article Multidisciplinary Sciences

A general approach to high-efficiency perovskite solar cells by any antisolvent

Alexander D. Taylor et al.

Summary: The authors report a general method for fabricating highly efficient perovskite solar cells using any antisolvent by manipulating the application rate. A detailed study of 14 different antisolvents revealed two key factors affecting film quality, leading to power conversion efficiencies exceeding 21% in devices made from a wide range of precursor chemistries.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A polymer controlled nucleation route towards the generalized growth of organic-inorganic perovskite single crystals

Lin Ma et al.

Summary: Progress has been made in the growth of organic-inorganic lead halide perovskite single crystals, with a focus on efficient and large-size crystal growth. By utilizing a polymer-controlled nucleation process, the carrier lifetime of FAPbBr(3) single crystals has been significantly improved. This approach shows potential in optimizing solution-based crystal growth and advancing applications of perovskite single crystals.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module

Zhichun Yang et al.

Summary: This study utilized diphenyl sulfoxide (DPSO) additive to enhance the efficiency and stability of perovskite solar cells, resulting in the successful fabrication of high-efficiency solar modules.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Investigating the iodide and bromide ion exchange in metal halide perovskite single crystals and thin films

Qingyi Huang et al.

Summary: The anion exchange between MAPbX(3) (X = I- or Br-) and MAX salts in a solution environment was investigated. It was found that I- can enter MAPbBr(3) single crystals (SC) in millimeter scale, while Br- can only penetrate the surface of MAPbI(3) SC in a micrometer scale. The reaction is partially reversible due to lattice variation.

CHEMICAL COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Scalable perovskite coating via anti-solvent-free Lewis acid-base adduct engineering for efficient perovskite solar modules

Do-Kyoung Lee et al.

Summary: High-quality large-area perovskite films were achieved using an anti-solvent-free adduct approach with DMPU as a Lewis base additive, significantly improving photovoltaic performance. The addition of DMPU affected the morphology and carrier lifetime of the perovskite film, leading to higher power conversion efficiency. A monolithic perovskite solar module with an active area of 19.69 cm(2) showed a PCE of 17.94% using the perovskite film prepared from the DMPU-containing solution.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Physical

Sulfur-Donor Solvents Strongly Coordinate Pb2+ in Hybrid Organic- Inorganic Perovskite Precursor Solutions

J. Clay Hamill et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Liquid Exfoliation of Two-Dimensional PbI2 Nanosheets for Ultrafast Photonics

Qun Fan et al.

ACS PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

Single-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency

Zhaolai Chen et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Understanding the Solution Chemistry of Lead Halide Perovskites Precursors

Eros Radicchi et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of Solvent Coordination on Hybrid Organic-Inorganic Perovskite Formation

J. Clay Hamill et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

Jin-Wook Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

添加到收藏夹

Review Chemistry, Physical

Halide Perovskites for Applications beyond Photovoltaics

Hyojung Kim et al.

SMALL METHODS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Brightly Luminescent and Color-Tunable Formamidinium Lead Halide Perovskite FAPbX3 (X = Cl, Br, I) Colloidal Nanocrystals

Ievgen Levchuk et al.

NANO LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fully Ambient-Processed Perovskite Film for Perovskite Solar Cells: Effect of Solvent Polarity on Lead Iodide

Wei-Ting Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Identifying the Molecular Structures of Intermediates for Optimizing the Fabrication of High-Quality Perovskite Films

Jing Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Retrograde solubility of formamidinium and methylammonium lead halide perovskites enabling rapid single crystal growth

Makhsud I. Saidaminov et al.

CHEMICAL COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemical Pathways Connecting Lead(II) Iodide and Perovskite via Polymeric Plumbate(II) Fiber

Yunlong Guo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid Halide Perovskite Solar Cell Precursors: Colloidal Chemistry and Coordination Engineering behind Device Processing for High Efficiency

Keyou Yan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Thermodynamics

Volumetric Properties of Binary Mixtures of 1-Butyl-1-Methylpyrrolidinium Tris(pentafluoroethyl)trifluorophosphate with N-Methylformamide, N-Ethylformamide, N,N-Dimethylformamide, N,N-Dibutylformamide, and N,N-Dimethylacetamide from (293.15 to 323.15) K

Slobodan Gadzuric et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2014)

添加到收藏夹

Review Crystallography

A review of polytypism in lead iodide

P. A. Beckmann

CRYSTAL RESEARCH AND TECHNOLOGY (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.