☆ 4.7 Article

Suppressing the Light-Soaking Effect of CsPbI2Br-Based p-i-n Perovskite Solar Cells

SOLAR RRL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Solvent dependent iodide oxidation in metal-halide perovskite precursor solutions

Eros Radicchi et al.

Summary: Solar cells using metal-halide perovskite (MHP) absorbing layers deposited from solution precursors have garnered significant attention in recent years. Understanding the solution chemistry is crucial for controlling the optoelectronic properties and reproducibility issues of MHP thin films. This study highlights the influence of iodide salt solutions, commonly employed in MHP synthesis, on the concentration of triiodide (I-3(-)), which is known to affect particle size and defect concentration. The oxidation of iodide (I-) to triiodide (I-3(-)) is found to vary depending on the counter-cation (K+, CH3NH3+) and solvent used, with enhanced oxidation in gamma-butyrolactone (GBL) solvent. This hidden reaction is likely related to the overall processing quality of MHP thin films.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Inverted perovskite solar cells using dimethylacridine-based dopants

Qin Tan et al.

Summary: A dimethylacridine-based molecular doping process is used to create a well-matched p-perovskite/ITO contact and achieve all-round passivation of grain boundaries, resulting in a certified power conversion efficiency of 25.39%.

NATURE (2023)

添加到收藏夹

Article Energy & Fuels

Co-deposition of hole-selective contact and absorber for improving the processability of perovskite solar cells

Xiaopeng Zheng et al.

Summary: To improve the manufacturability of perovskite solar cells, researchers have developed a one-step solution-coating procedure that simplifies the fabrication process and addresses wettability issues.

NATURE ENERGY (2023)

添加到收藏夹

Article Chemistry, Physical

Surface Engineering of Submicron Cu(In,Ga)Se2 for High-Efficient Zn(O,S)-Based Solar Cells with Lower Light Soaking Effects

Wuji Wang et al.

Summary: This study effectively suppressed the light soaking effect in Zn(O,S)/CIGS solar cells by carefully regulating the surface components of the submicron CIGS absorption layer. It increased the conversion efficiency of the solar cells, especially the fill factor. By combining appropriate surface regulation and an anti-reflection layer of MgF2, a 17.6% Cd-free submicron CIGS solar cell with significantly lower light soaking effect was achieved, representing the highest value in submicron CIGS solar devices. This research paves the way for suppressing the metastable effect in CIGS absorber layer.

ACS APPLIED ENERGY MATERIALS (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent progress in the development of high-efficiency inverted perovskite solar cells

Sanwan Liu et al.

Summary: Perovskite solar cells (PSCs) have gained much attention for their low cost and high efficiency, but their long-term stability issues have hindered commercialization. Inverted PSCs with a p-i-n architecture have been extensively studied due to their good stability and efficiency. This review summarizes recent progress in high-efficiency inverted PSCs, including perovskite compositions, fabrication methods, and counter electrode materials. The development of charge transport materials and defect passivation strategies are also highlighted for their impact on inverted PSC performance. The remaining challenges and future perspectives are discussed.

NPG ASIA MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrazide Derivatives for Defect Passivation in Pure CsPbI3 Perovskite Solar Cells

Yuhang Che et al.

Summary: By designing new derivatives, the defect density of CsPbI3 films can be reduced, improving the stability and efficiency of solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Chemistry, Applied

Improving the stability and scalability of all-inorganic inverted CsPbI2Br perovskite solar cell

Chenghao Duan et al.

Summary: In this paper, ultrathin Ti1-xSnxO2 nanoparticles were prepared as an electron transport layer for all-inorganic perovskite solar cells. The improved interface contact of the ultrathin Ti0.9Sn0.1O2 nanocrystals led to enhanced performance and stability. The study demonstrated a promising approach to improve the scalability and stability of perovskite solar cells.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Boost the efficiency of nickel oxide-based formamidinium-cesium perovskite solar cells to 21% by using coumarin 343 dye as defect passivator

Sanwan Liu et al.

Summary: This study introduces an organic dye C343 into the perovskite to improve the efficiency and stability of nickel oxide-based inverted perovskite solar cells. The strong coordination between C343 and Pb2+ optimizes perovskite crystal growth and reduces defects densities within perovskite films, leading to one of the highest efficiencies reported for FACs perovskite and nickel oxide based inverted PSCs. Additionally, the utilization of C343 benefits devices' stability, maintaining performance over 94% and 95% after aging and continuous operation for 500 hours, respectively.

NANO ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Revealing the Correlation of Light Soaking Effect with Ion Migration in Perovskite Solar Cells

Biao Li et al.

Summary: The light soaking effect in perovskite solar cells has attracted significant attention. This study reveals that the power conversion efficiency of FA(x)MA(1-x)PbI(3) perovskite solar cells increases from 7.5% to 20.5% under continuous light illumination. The LS effect is attributed to the modulation of mobile ion distribution by the generated photovoltage, which enhances charge extraction ability and reduces interface recombination. Moreover, the introduction of Cs+ suppresses the LS effect by reducing the density of accumulated mobile ions.

SOLAR RRL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effective Passivation with Size-Matched Alkyldiammonium Iodide for High-Performance Inverted Perovskite Solar Cells

Sanwan Liu et al.

Summary: This study systematically investigates the defect passivation role of several alkylammonium salts in formamidinium-cesium perovskite, finding that BDAI(2) salt exhibits the best passivation effect by reducing trap-state density and enhancing carrier extraction. BDAI(2)-modified devices achieve impressive efficiencies in both rigid and flexible substrates, with 92% of the initial efficiency maintained after long-term operation under continuous illumination. The mechanical flexibility of the BDAI(2)-modified flexible device is also improved due to the release of residual stress.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Initializing film homogeneity to retard phase segregation for stable perovskite solar cells

Yang Bai et al.

Summary: The mixtures of cations and anions in hybrid halide perovskites for solar cells often undergo segregation, limiting device lifetime. By adding selenophene, the distribution of ions in the film becomes more homogeneous, resulting in improved efficiency and prolonged operational lifetime.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Valence-Regulated Metal Doping of Mixed-Halide Perovskites to Modulate Phase Segregation and Solar Cell Performance

Long Hu et al.

Summary: This study comprehensively investigates the impact of Pb substitution on n-type CsPbIBr2 perovskite and reveals the different effects of monovalent Ag, divalent Zn, and trivalent Sb on trap densities. The Ag doping significantly reduces phase separation, while Sb doping accelerates halide segregation and Zn doping has a negligible influence. The p-doping effect of Ag shifts the Fermi level of CsPbIBr2, preventing the formation of ionic defects and reducing halide ion migration.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Iodine reduction for reproducible and high-performance perovskite solar cells and modules

Shangshang Chen et al.

Summary: Organic iodide perovskite precursors can be oxidized to I-2, impacting the performance and reproducibility of PSCs, but adding benzylhydrazine hydrochloride can effectively improve the situation. The stabilized efficiency of PSCs has been greatly enhanced after treatment.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Control over Light Soaking Effect in All-Inorganic Perovskite Solar Cells

Xiao Wu et al.

Summary: Light soaking has been found to enhance device performance of CsPb(I1-xBrx)(3) based PSCs by promoting the migration of halide ions, leading to defect passivation and device improvements. Incorporating slightly over-stoichiometric PbI2 in the precursor is proposed as an effective means to suppress the light soaking effect.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Review Energy & Fuels

Mini-Review on Efficiency and Stability of Perovskite Solar Cells with Spiro-OMeTAD Hole Transport Layer: Recent Progress and Perspectives

Ganbaatar Tumen-Ulzii et al.

Summary: Organic-inorganic metal halide perovskite solar cells exhibit high PCE and long-term stability issues, especially at high temperatures. Research has significantly improved the stability of PSCs, but further investigation and exploration of new HTL materials are still needed.

ENERGY & FUELS (2021)

添加到收藏夹

Article Chemistry, Physical

Composition manipulation boosts the efficiency of carbon-based CsPbI3 perovskite solar cells to beyond 14%

Hailiang Wang et al.

Summary: The study systematically investigated the crystallization processes of DMAI-based CsPbI3 perovskite, revealing that DMA ions tend to form DMAPbI(3) and pre-generated Cs4PbI6 plays a crucial role in stabilizing CsPbI3 phase. These findings help enhance the quality of CsPbI3 film and contribute to achieving a record efficiency of 14.6% in carbon-based CsPbI3 PSCs without hole transporter.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Elimination of Light-Soaking Effect in Hysteresis-Free Perovskite Solar Cells by Interfacial Modification

Cheng Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Graphene-mediated enhanced Raman scattering and coherent light lasing from CsPbI3 perovskite nanorods

Jung-Hye Kim et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Caleb C. Boyd et al.

JOULE (2020)

添加到收藏夹

Article Energy & Fuels

Structurally Reinforced All-Inorganic CsPbI2Br Perovskite by Nonionic Polymer via Coordination and Hydrogen Bonds

Huirong Peng et al.

SOLAR RRL (2020)

添加到收藏夹

Article Energy & Fuels

Multilayer Cascade Charge Transport Layer for High-Performance Inverted Mesoscopic All-Inorganic and Hybrid Wide-Bandgap Perovskite Solar Cells

Yu Chen et al.

SOLAR RRL (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Low-temperature interfacial engineering for flexible CsPbI2Br perovskite solar cells with high performance beyond 15%

Xia Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability

Jingjing Tian et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Electrochemistry

Direct formed tri-iodide ions stabilizing colloidal precursor solution and promoting the reproducibility of perovskite solar cells by solution process

Kai Sun et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Article Chemistry, Physical

Impact of surface dipole in NiOx on the crystallization and photovoltaic performance of organometal halide perovskite solar cells

Yuanhang Cheng et al.

NANO ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Inorganic CsPbI2Br Perovskite Solar Cells: The Progress and Perspective

Qingsen Zeng et al.

SOLAR RRL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Band engineering at the interface of all-inorganic CsPbI2Br solar cells

Jing Zhuang et al.

NANOSCALE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-performance light-soaking-free polymer solar cells based on a LiF modified ZnO electron extraction layer

Zhitian Ling et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Lei Yan et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Direct formation of I3- ions in organic cation solution for efficient perovskite solar cells

Qiang Sun et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

添加到收藏夹

Article Chemistry, Physical

Restrained light-soaking and reduced hysteresis in perovskite solar cells employing a helical perylene diimide interfacial layer

Liyan Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Eliminating Light-Soaking Instability in Planar Heterojunction Perovskite Solar Cells by Interfacial Modifications

Pang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%

Dongliang Bai et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Pinning Down the Anomalous Light Soaking Effect toward High Performance and Fast-Response Perovskite Solar Cells: The Ion Migration-Induced Charge Accumulation

Teng Zhang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Improved Charge Collection in Highly Efficient CsPbBrI2 Solar Cells with Light-Induced Dealloying

J. Scott Niezgoda et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Energy & Fuels

Light Illumination Induced Photoluminescence Enhancement and Quenching in Lead Halide Perovskite

Sheng Chen et al.

SOLAR RRL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elimination of the light soaking effect and performance enhancement in perovskite solar cells using a fullerene derivative

Shuyan Shao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Origin of the S-Shaped JV Curve and the Light-Soaking Issue in Inverted Organic Solar Cells

Anton Sundqvist et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

The origin of an efficiency improving light soaking effect in SnO2 based solid-state dye-sensitized solar cells

Priti Tiwana et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.