☆ 4.8 Article

Octylammonium Iodide Induced In-situ Healing at perovskite/Carbon Interface to Achieve 85% RH-moisture Stable, Hole-Conductor-Free Perovskite Solar Cells with Power Conversion Efficiency >19%

SMALL METHODS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Blade-Coated Carbon Electrode Perovskite Solar Cells to Exceed 20% Efficiency Through Protective Buffer Layers

Yaqing Li et al.

Summary: In this study, an organic/inorganic double planar hole transport layer (HTL) is constructed, which achieves a cascade type-II energy level alignment at the perovskite/HTL interfaces and a preferential ohmic contact at NiOx/carbon electrode. This design greatly enhances charge collection while suppressing charge transfer recombination in perovskite solar cells with carbon electrode. Additionally, the planar composite protects perovskite from being corroded by carbon paste, enabling a robust interfacial contact and achieving high efficiency.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Driven Prenucleation-Induced Perovskite Crystallization Enables Efficient Perovskite Solar Cells

Yao Wang et al.

Summary: A self-driven prenucleation strategy using formamide as the co-solvent is proposed to achieve fast nucleation and improve the crystalline quality of perovskite film.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improved Thermal Stability and Film Uniformity of Halide Perovskite by Confinement Effect brought by Polymer Chains of Polyvinyl Pyrrolidone

Shuyue Wu et al.

Summary: Polyvinyl pyrrolidone (PVP) is doped into the growth process of halide perovskite, and it interacts with PbI2 and organic salt to inhibit their aggregation and crystallization. The doping of PVP leads to a decrease in crystallite size, surface fluctuation, and roughness, resulting in a compact and uniform perovskite film. The power conversion efficiency of perovskite solar cells is improved due to the confinement effect, which also enhances the thermal stability of the film and device.

SMALL (2023)

添加到收藏夹

Article Chemistry, Physical

Improved Crystallization of Lead Halide Perovskite in Two-Step Growth Method by Polymer-Assisted Slow-Release Effect

Siyuan Lin et al.

Summary: Blending polyacrylic acid with organic salt can regulate the crystallization process and slow down the reaction rate between organic salt and PbI2, improving the crystallization of perovskite. The addition of polyacrylic acid increases the crystallite size and grain size of perovskite. By reducing trap density and charge recombination, the charge carrier lifetime in perovskite film and devices is prolonged, leading to an increase in power conversion efficiency of the device.

SMALL METHODS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ion-Diffusion Management Enables All-Interface Defect Passivation of Perovskite Solar Cells

Lina Shen et al.

Summary: Perovskite solar cells (PSCs) with over 25% power conversion efficiency have been achieved through efficient surface passivation. However, current post-treatment strategies can only repair the defects at the top interface. In this study, an ion-diffusion management strategy is proposed to simultaneously modulate the top interfaces, buried interfaces, and bulk interfaces of the perovskite film, achieving passivation of all interface defects. By using double interactive salts of octylammonium iodide (OAI) and guanidinium chloride (GACl) on the 3D perovskite surface, the diffusion of ions can be controlled, resulting in a dimensionally broadened 2D capping layer. This approach leads to the formation of n-inter-i-inter-p five-layer structured PSCs with a champion PCE of 25.43% (certified 24.4%), and improved operational stability of perovskite solar cells.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Pure Chloride 2D/3D Heterostructure Passivation for Efficient and Stable Perovskite Solar Cells

Li Tan et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) have shown great potential in industrial commercialization, reaching a certified efficiency of 25.7%. However, defects at the surface and grain boundaries currently limit their device performance and long-term stability. In this study, long-chain dodecylammonium halides (DACl, DABr, and DAI) are introduced to treat the perovskite surface and enhance device performance. It is found that the DACl-treated PSCs achieve a champion power conversion efficiency of 23.91% and maintain around 95% of their initial efficiency after 1000 hours of storage under specific conditions.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2023)

添加到收藏夹

Article Chemistry, Physical

In Situ Formation of δ-FAPbI3 at the Perovskite/Carbon Interface for Enhanced Photovoltage of Printable Mesoscopic Perovskite Solar Cells

Xiayan Chen et al.

Summary: In this study, the transformation of alpha-phase FAPbI(3) to delta-phase FAPbI(3) and the formation of an alpha/delta-phase junction were observed in hole-conductor-free triple-mesoscopic perovskite solar cells (PSCs) exposed to humid atmosphere. This junction exhibited a favorable band alignment and effectively suppressed charge recombination at the interface, leading to enhanced device performance.

CHEMISTRY OF MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering

Huiyin Zhang et al.

Summary: High-performance planar C-PSCs were fabricated through device configuration engineering, improving the crystallization and absorption profiles of the perovskite active layer and enhancing carrier generation. Comprehensive evaluation of the physical and mechanical properties of the carbon electrode regulated the back interface contact. The prepared devices achieved a remarkable PCE of up to 20.04% and demonstrated excellent long-term stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells

Fei Zhang et al.

Summary: The performance of 3D perovskite solar cells can be improved by treating the surface with 2D layered perovskites that have efficient charge transport. Adjusting the arrangement of organic molecules enhances hole transport and power conversion efficiency. The use of a stable 2D surface layer also improves the performance and stability of 3D perovskite solar cells.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Defective MWCNT Enabled Dual Interface Coupling for Carbon-based Perovskite Solar Cells with Efficiency Exceeding 22%

Yudi Wang et al.

Summary: This study demonstrates the use of defective multi-walled carbon nanotubes to improve the charge transfer kinetics of carbon-based perovskite solar cells (C-PSCs). Through molecular-level interface coupling and nanometer-scale interface coupling, rapid charge transfer and seamless connection have been achieved, resulting in improved power conversion efficiency and operational stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Physics, Applied

Passivating the interface between halide perovskite and SnO2 by capsaicin to accelerate charge transfer and retard recombination

Siyuan Lin et al.

Summary: The study shows that capsaicin-modified SnO2 quantum dots can be used as an electron-transfer material for perovskite solar cells, increasing the power conversion efficiency of the devices and improving key parameters such as lifetime and charge extraction speed.

APPLIED PHYSICS LETTERS (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Rethinking the A cation in halide perovskites

Jin-Wook Lee et al.

Summary: The A cation in ABX(3) organic-inorganic lead halide perovskites (OLHPs) was conventionally believed to hardly affect their optoelectronic properties. However, recent developments have revealed the critical role of the A cation in regulating the physicochemical and optoelectronic properties of OLHPs.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Employing 2D-Perovskite as an Electron Blocking Layer in Highly Efficient (18.5%) Perovskite Solar Cells with Printable Low Temperature Carbon Electrode

Salma Zouhair et al.

Summary: This study introduces a new structure of solar cell using 2D perovskite as an electron blocking layer, which can substantially reduce interfacial losses and significantly improve the stability of the device.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Physics, Applied

SnO2 modified mesoporous ZrO2 as efficient electron-transport layer for carbon-electrode based, low-temperature mesoscopic perovskite solar cells

De'en Guo et al.

Summary: This study demonstrates that SnO2-modified mesoporous ZrO2 can serve as an efficient electron-transport layer in low-temperature mesoscopic perovskite solar cells, resulting in accelerated charge extraction and reduced recombination, leading to improved power conversion efficiency.

APPLIED PHYSICS LETTERS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells

Tiankai Zhang et al.

Summary: This study proposes a new doping strategy for perovskite solar cells, using stable organic radicals as dopants and ionic salts as doping modulators. The strategy improves the performance and stability of the devices and could inspire further optimization in other optoelectronic devices.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Siraj Sidhik et al.

Summary: Realizing solution-processed heterostructures in halide perovskites is a long-standing challenge due to solvent incompatibilities. However, by utilizing the solvent dielectric constant and Gutmann donor number, it is possible to grow phase-pure two-dimensional (2D) halide perovskite stacks with desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. The thickness dependence of the 2D perovskite layer shows expected trends for different device architectures, indicating the influence of band alignment and carrier transport limits.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Highly oriented MAPbI 3 crystals for efficient hole-conductor-free printable mesoscopic perovskite solar cells

Shuang Liu et al.

Summary: This study presents the preparation of highly oriented MAPbI (3) perovskite crystals in a triple mesoscopic scaffold, which suppresses non-radiative recombination and promotes charge transport. The corresponding perovskite solar cells exhibit high power conversion efficiency and promising long-term operational stability.

FUNDAMENTAL RESEARCH (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Linkage and Carbon Encapsulation Enable Full Solution-Printed Perovskite Photovoltaics with Prolonged Lifespan

Tian Tian et al.

Summary: Simplified perovskite solar cells were fabricated using a fully blade-coated process, with the perovskite layer sandwiched between carbon-based electron transport layer and counter electrode. The use of a self-assembled monolayer of amphiphilic silane molecules on a transparent conducting oxide substrate enhanced stability by facilitating interfacial charge extraction and reducing hysteresis. This approach increased PCE and maintained performance stability over 3000 hours of storage under ambient conditions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Cost-Effective High-Performance Charge-Carrier-Transport-Layer-Free Perovskite Solar Cells Achieved by Suppressing Ion Migration

Tao Ye et al.

Summary: The development of high-performance perovskite solar cells without charge-carrier-transport layers (CTLs) has been achieved by introducing perfluorotetradecanoic acid (PFTeDA) to suppress ion migration and reduce crystal defects in perovskites. The modified carbon-based HTL-free PSC shows a record PCE of 18.9%, with PFTeDA molecules enhancing environmental, thermal, and light stabilities at the grain boundaries between perovskite crystals.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Energy & Fuels

Cellulose-Based Oxygen-Rich Activated Carbon for Printable Mesoscopic Perovskite Solar Cells

Chao Liu et al.

Summary: Activated carbon synthesized from cellulose was used as back electrodes in perovskite solar cells, leading to improved efficiency due to enhanced wettability and contact between the electrodes and perovskites. The high oxygen content in the activated carbon also raised the work function of the electrodes, contributing to the performance enhancement in the cells.

SOLAR RRL (2021)

添加到收藏夹

Article Energy & Fuels

Simultaneous Improvement of the Power Conversion Efficiency and Stability of Perovskite Solar Cells by Doping PMMA Polymer in Spiro-OMeTAD-Based Hole-Transporting Layer

Pufeihong Xia et al.

Summary: Adding long-chain polymer or PMMA into the spiro-OMeTAD matrix improves film formation process and device performance, resulting in increased open-circuit voltage, fill factor, and power conversion efficiency for perovskite solar cells.

SOLAR RRL (2021)

添加到收藏夹

Article Physics, Multidisciplinary

SiO2nanoparticle-regulated crystallization of lead halide perovskite and improved efficiency of carbon-electrode-based low-temperature planar perovskite solar cells*

Zerong Liang et al.

CHINESE PHYSICS B (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Intermediate-Controlled Interfacial Engineering for Stable and Highly Efficient Carbon-Based PSCs

Fanning Meng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Chemistry, Physical

A review on C1s XPS-spectra for some kinds of carbon materials

Xiangnan Chen et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2020)

添加到收藏夹

Article Energy & Fuels

High performance carbon-based planar perovskite solar cells by hot-pressing approach

Yang Yang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

添加到收藏夹

Article Chemistry, Physical

Fabrication Strategy for Efficient 2D/3D Perovskite Solar Cells Enabled by Diffusion Passivation and Strain Compensation

Cuiling Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking

Anyi Mei et al.

JOULE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

添加到收藏夹

Review Energy & Fuels

Carbon-Electrode Based Perovskite Solar Cells: Effect of Bulk Engineering and Interface Engineering on the Power Conversion Properties

Conghua Zhou et al.

SOLAR RRL (2020)

添加到收藏夹

Article Physics, Applied

Accelerated hole-extraction in carbon-electrode based planar perovskite solar cells by moisture-assisted post-annealing

Jiaqi Yan et al.

APPLIED PHYSICS LETTERS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Cost and Highly Efficient Carbon-Based Perovskite Solar Cells Exhibiting Excellent Long-Term Operational and UV Stability

Neha Arora et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Hyeonwoo Kim et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Ultrathin Ferroelectric Perovskite Oxide Layer for High-Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells

Yinglong Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

In situ growth of perovskite stacking layers for high-efficiency carbon-based hole conductor free perovskite solar cells

Jianhua Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode

Qian-Qian Chu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Physical

Role of spiro-OMeTAD in performance deterioration of perovskite solar cells at high temperature and reuse of the perovskite films to avoid Pb-waste

Ajay Kumar Jena et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Adhesive Macroporous Carbon Electrodes for Efficient and Stable Perovskite Solar Cells

Huiyin Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Oxygen management in carbon electrode for high-performance printable perovskite solar cells

Chengbo Tian et al.

NANO ENERGY (2018)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Addressing the stability issue of perovskite solar cells for commercial applications

Lei Meng et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boron Doping of Multiwalled Carbon Nanotubes Significantly Enhances Hole Extraction in Carbon-Based Perovskite Solar Cells

Xiaoli Zheng et al.

NANO LETTERS (2017)

添加到收藏夹

Editorial Material Chemistry, Physical

Electric-Field-Driven Reversible Conversion Between Methylammonium Lead Triiodide Perovskites and Lead Iodide at Elevated Temperatures

Yongbo Yuan et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes

Cristina Besleaga et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

添加到收藏夹

Article Chemistry, Physical

Low-Temperature Processed and Carbon-Based ZnO/CH3NH3Pbl3/C Planar Heterojunction Perovskite Solar Cells

Huawei Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes

Yuichi Kato et al.

ADVANCED MATERIALS INTERFACES (2015)

添加到收藏夹

Article Multidisciplinary Sciences

A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability

Anyi Mei et al.

SCIENCE (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode

Zhiliang Ku et al.

SCIENTIFIC REPORTS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optically Tunable Amino-Functionalized Graphene Quantum Dots

Hiroyuki Tetsuka et al.

ADVANCED MATERIALS (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Surface analytical studies of interfaces in organic semiconductor devices

Yongli Gao

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flat-band potential of a semiconductor: using the Mott-Schottky equation

K. Gelderman et al.

JOURNAL OF CHEMICAL EDUCATION (2007)

添加到收藏夹

Article Chemistry, Physical

Bulk and surface structural investigations of diesel engine soot and carbon black

J.-O. Mueller et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2007)

添加到收藏夹

Article Chemistry, Physical

Oxygen reduction catalysts for polymer electrolyte fuel cells from the pyrolysis of iron acetate adsorbed on various carbon supports

F Jaouen et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.