☆ 4.8 Article

Homogeneous Li deposition guided by ultra-thin lithiophilic layer for highly stable anode-free batteries

ENERGY STORAGE MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Growing single-crystalline seeds on lithiophobic substrates to enable fast-charging lithium-metal batteries

Zhaohui Wu et al.

Summary: Controlling the nucleation and growth is essential for enabling long-life Li-metal batteries. Here, the authors report the growth of faceted single-crystalline Li seeds on a lithiophobic Fe/LiF composite substrate that enables dense Li deposition under fast-charging conditions. A cell using a 3 mAh cm(-2) LiNi0.8Co0.1Mn0.1O2 (LiNMC811) cathode, onefold excess of lithium and 3 g Ah(-1) electrolyte cycles at a 1 C rate for more than 130 cycles with 80% capacity retention, a 550% improvement over the baseline cells. These findings advance the understanding of lithium nucleation and pave the way for realizing high-energy, fast-charging Li-metal batteries.

NATURE ENERGY (2023)

添加到收藏夹

Article Chemistry, Physical

A new approach to stabilize the electrochemical performance of Li metal batteries through the structure alteration of CNT scaffolds

Junghwan Kim et al.

Summary: Li-metal batteries (LMBs) have attracted renewed interest due to their high specific capacity and low operating potential, which can help overcome the limitations of conventional Li-ion batteries. However, poor coulombic efficiency and dendritic Li formation pose challenges for the commercial use of Li-metal anodes. Among various strategies, the utilization of 3D current collectors, specifically carbon nanotubes (MWNTs), has shown promising results in improving the electrochemical stability of LMBs. The MWNT current collector facilitates uniform and stable Li deposition, thereby reducing the growth of dendritic Li and contributing to the stable operation of Li-metal cells at high current densities.

CARBON (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lithiophilic Cu-Li2O matrix on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Zhe Gong et al.

Summary: The study introduces a pre-lithiation strategy to address the safety issues and growth obstacles faced by lithium metal anodes, by constructing a high-lithiophilic Cu-Li2O matrix on commercial Cu foil. This approach demonstrates enhanced lithium plating/stripping behavior and extended lifespan of lithium-plated electrodes, showcasing a scalable and effective method for stable Li metal anodes using modified current collectors.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Anode-Free Full Cells: A Pathway to High-Energy Density Lithium-Metal Batteries

Sanjay Nanda et al.

Summary: The anode-free full cell configuration is ideal for high energy density and lithium storage, but poor efficiencies of lithium plating and stripping lead to short cycle life. Recent studies have shown that advanced electrolytes and other methods can stabilize lithium deposition and improve cycle life.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Epitaxial Induced Plating Current-Collector Lasting Lifespan of Anode-Free Lithium Metal Battery

Liangdong Lin et al.

Summary: The lifespan of an anode-free Li metal battery has been prolonged by applying an epitaxial induced plating current-collector (E-Cu) in this study, promoting Li storage and forming a LiF-rich solid electrolyte interphase (SEI) beneficial for uniform Li plating. This strategy has increased the initial coulombic efficiency and capacity retention of the battery, achieving a remarkable energy density under limited electrolyte addition conditions.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Highly-lithiophilic Ag@PDA-GO film to Suppress Dendrite Formation on Cu Substrate in Anode-free Lithium Metal Batteries

Zewdu Tadesse Wondimkun et al.

Summary: By coating lithiophilic Ag@PDA and artificial SEI graphene oxide (GO) on the Cu current collector, a more uniform lithium deposition, lower nucleation overpotential, and higher Coulombic efficiency can be achieved. The modified electrodes show enhanced performance in inhibiting lithium dendrite growth and electrolyte decomposition in anode free lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Free-standing ultrathin lithium metal-graphene oxide host foils with controllable thickness for lithium batteries

Hao Chen et al.

Summary: An ultrathin, free-standing, mechanically robust Li metal foil has been developed, which improves the initial Coulombic efficiency, increases full cell capacity, and prolongs the cycle life of Li metal full cells.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A key strategy to form a LiF-based SEI layer for a lithium-ion battery anode with enhanced cycling stability by introducing a semi-ionic C-F bond

Kyung Hoon Kim et al.

Summary: This study introduces a semi-ionic C-F bond on the surface of graphite to enhance the cycling stability of lithium-ion batteries by forming a stable LiF-based solid electrolyte interphase (SEI) layer on the anode. The semi-ionic C-F bond improved the formation of a stable SEI layer and decreased side reactions with HF, resulting in excellent long-term cycling stability. Additionally, the anode with semi-ionic C-F bonds exhibited a lower volume expansion compared to pristine anodes, highlighting the effectiveness of this approach.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Elemental Foil Anodes for Lithium-Ion Batteries

Brian T. Heligman et al.

Summary: Aluminum, indium, tin, and lead are identified as promising candidates for alloying anodes, offering a potential 40-50% improvement in energy density over current graphite-based systems. These materials not only have high capacities but also show remarkable formation efficiencies, laying the groundwork for designing stable foil anodes for high-energy-density batteries.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Review Chemistry, Physical

Interfacial chemistry in anode-free batteries: challenges and strategies

Zizheng Tong et al.

Summary: The energy density of lithium-ion batteries has been continuously increasing, with the anode-free design attracting attention but facing challenges such as low coulombic efficiency and dendrite growth. Tuning interfacial chemistry is seen as a promising approach to address these issues, with various strategies being explored to modify interfaces in order to improve cycling stability of anode-free batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Energy & Fuels

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes

Yong-Gun Lee et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis

A. J. Louli et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Large-size carbon-coated SnO2 composite as improved anode material for lithium ion batteries

Wenhe Xie et al.

IONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Revealing and Elucidating ALD-Derived Control of Lithium Plating Microstructure

Solomon T. Oyakhire et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Thermodynamics

CO2 emissions patterns in 7 top carbon emitter economies: The case of transport sector

Saeed Solaymani

ENERGY (2019)

添加到收藏夹

Review Energy & Fuels

Pathways for practical high-energy long-cycling lithium metal batteries

Jun Liu et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Investigation of the Hydrophobic Nature of Metal Oxide Surfaces Created by Atomic Layer Deposition

Jongyoon Bae et al.

LANGMUIR (2019)

添加到收藏夹

Article Chemistry, Physical

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

Jitti Kasemchainan et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Polydopamine Coating Layer Modified Current Collector for Dendrite-Free Li Metal Anode

Ying He et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Wettability in electrodes and its impact on the performance of lithium-ion batteries

Dong Hyup Jeon

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

SnO2 Model Electrode Cycled in Li-Ion Battery Reveals the Formation of Li2SnO3 and Li8SnO6 Phases through Conversion Reactions

Giulio Ferraresi et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Review Chemistry, Physical

Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries

Aiping Wang et al.

NPJ COMPUTATIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Negating interfacial impedance in garnet-based solid-state Li metal batteries

Xiaogang Han et al.

NATURE MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Passivation of Lithium Metal Anode via Hybrid Ionic Liquid Electrolyte toward Stable Li Plating/Stripping

Nian-Wu Li et al.

ADVANCED SCIENCE (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode

Yizhou Zhu et al.

ADVANCED SCIENCE (2017)

添加到收藏夹

Article Energy & Fuels

Introduction and application of formation methods based on serial-connected lithium-ion battery cells

Verena Mueller et al.

JOURNAL OF ENERGY STORAGE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anode-Free Rechargeable Lithium Metal Batteries

Jiangfeng Qian et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Designed hybrid nanostructure with catalytic effect: beyond the theoretical capacity of SnO2 anode material for lithium ion batteries

Ye Wang et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Physical

Fabrication of high wettability gradient on copper substrate

Ding-Jun Huang et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

Development and challenges of LiFePO4 cathode material for lithium-ion batteries

Li-Xia Yuan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.