☆ 4.7 Article

Serviceability parameters and social sustainability assessment of flax fabric reinforced lime-based drywall interior panels

JOURNAL OF BUILDING ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Integrated value model for sustainability assessment of residential solar energy systems towards minimizing urban air pollution in Tehran

S. Hamed Banirazi Motlagh et al.

Summary: This study develops a new model to evaluate the air pollution mitigation capacity of solar systems and assist decision-makers in choosing the most suitable solution. The results show that solar systems can effectively reduce CO2 and PM pollutants, and have high sustainability indexes. Furthermore, researchers expect future improvements in solar collectors to make them more environmentally friendly and cost-effective solutions.

SOLAR ENERGY (2023)

添加到收藏夹

Article Construction & Building Technology

The effect of fibres and carbonation conditions on the mechanical properties and microstructure of lime/flax composites

A. Rakhsh Mahpour et al.

CEMENT & CONCRETE COMPOSITES (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Approach for sustainability assessment for footbridge construction technologies: Application to the first world D-shape 3D-Printed fiber-reinforced mortar footbridge in Madrid

Oriol Pons-Valladares et al.

Summary: As potential alternatives to traditional construction for reinforced concrete structural components, 3D-printed concrete technologies (3DPCTs) are emerging to improve sustainability in the construction sector. Although traditional technologies are still widely used, the DS-3DPCT has proven technically feasible for producing pilot structural elements like footbridges. However, research on sustainability performance by DS-3DPCT is scarce and primarily focused on identifying indicators and limited quantifications.

JOURNAL OF CLEANER PRODUCTION (2023)

添加到收藏夹

Article Construction & Building Technology

Effect of accelerated aging and silica fume addition on the mechanical and microstructural properties of hybrid textile waste-flax fabric-reinforced cement composites

Payam Sadrolodabaee et al.

Summary: This study presents an extensive experimental program on a cement-based composite reinforced with recycled textile waste nonwoven fabric and silica fume. The results showed that the composite modified by 30% SF offered the greatest durability, with increased flexural and tensile resistances of up to 45% and 55% respectively, in wet-dry cycles.

CEMENT & CONCRETE COMPOSITES (2023)

添加到收藏夹

Review Construction & Building Technology

Integration of BIM and Value Model for Sustainability Assessment for application in bridge projects

F. Lozano et al.

Summary: The integration of multicriteria decision-making methods with building information modeling provides robust support for decision-making when assessing the sustainability of construction projects. This study developed a new method coupling the Integrated Value Model for Sustainability Assessment and BIM methodologies to realize automatic sustainability assessment of bridges, which can be adapted to other types of infrastructure.

AUTOMATION IN CONSTRUCTION (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Vegetal Fiber Additives in Mortars: Experimental Characterization of Thermal and Acoustic Properties

Chiara Quintaliani et al.

Summary: This paper investigates the influence of adding vegetal fibers on thermal and acoustic performance in natural hydraulic lime. Different types and sizes of fibers were used, and it was found that rice husk and Khorasan wheat chaff can significantly reduce thermal conductivity. Ground fibers showed good thermal and acoustic absorption performance. However, the addition of fibers reduced sound insulation properties.

SUSTAINABILITY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental characterization of comfort performance parameters and multi-criteria sustainability assessment of recycled textile-reinforced cement facade cladding

Payam Sadrolodabaee et al.

Summary: Fiber cement boards have gained popularity as facade cladding materials in the construction sector, especially those incorporating natural and/or recycled synthetic fibers. The sustainability performance of facades is often overlooked in design and project phases, potentially leading to decisions based solely on economic and environmental indicators that may not meet the expected sustainability performance.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Chemistry, Physical

Compressive and Thermal Properties of Non-Structural Lightweight Concrete Containing Industrial Byproduct Aggregates

Ilenia Farina et al.

Summary: This study investigates the recycling opportunities for industrial byproducts in innovative concrete manufacturing processes. The use of municipal solid waste incineration fly ash as a main component in artificially manufactured aggregates shows potential for producing lightweight concrete with good thermal performance. Substituting a percentage of recycled aggregates with recycled polyethylene terephthalate can further improve thermal conductivity. This type of concrete could have positive economic and environmental impacts by reducing the use of cement and lowering CO2 emissions.

MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Cement composite plates reinforced with nonwoven fabrics from technical textile waste fibres: Mechanical and environmental assessment

Heura Ventura et al.

Summary: This work presents the development and characterization of new cement-based composite panels reinforced with fibers recovered from waste, aiming for their application on ventilated facades. The environmental impact of these panels was evaluated and compared with similar materials used for ventilated facades. It was found that the new composite material has similar environmental performance to fiber cement facing tiles and outperforms traditional ceramic tiles and natural stone plates.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Polymer Science

Mechanical Properties of Polyvinyl Alcohol Fiber-Reinforced Cementitious Composites after High-Temperature Exposure

Peng Zhang et al.

Summary: This study evaluated the effects of high temperature, fiber content, and cooling method on the properties of cementitious composites. The results showed that PVA fibers reduced the probability of explosion spalling in high-temperature conditions. However, at temperatures above 400 degrees C, melted fibers created pores and channels, resulting in a decrease in strength.

GELS (2022)

添加到收藏夹

Article Construction & Building Technology

Cementitious Insulated Drywall Panels Reinforced with Kraft-Paper Honeycomb Structures

Sepideh Shahbazi et al.

Summary: The traditional gypsum-based drywall panels are susceptible to mold growth in humid climates and can have a negative impact on the environment when disposed of in landfills. This study proposes a lightweight composite sandwich panel as an alternative, which improves flexural strength and thermal insulation by using a cementitious binder mix and kraft-paper honeycomb structures.

BUILDINGS (2022)

添加到收藏夹

Article Thermodynamics

CO2 adsorption on calcium silicate hydrate gel synthesized by double decomposition method

Moises Martin-Garrido et al.

Summary: Calcium silicate hydrate gel (C-S-H) was synthesized using the double decomposition method for its simplicity and quickness. Analysis using various spectroscopy methods showed changes in the gel structure over time, including polymerization and a decrease in the Ca/Si ratio. The DTA/TG/MS analysis revealed a mass loss due to CO2 adsorption on the gel at temperatures below 400 degrees C.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Construction & Building Technology

Study of the fire and thermal behaviour of facade panels made of natural fibre-reinforced cement-based composites

L. Gonzalez-Lopez et al.

Summary: The thermal and fire behavior of calcium aluminate cement-based composites with added metakaolin and reinforced with nonwoven flax fabrics were examined, showing that the materials maintained integrity and performance at high temperatures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Sustainability-Driven Decision-Making Model: Case Study of Fiber-Reinforced Concrete Foundation Piles

O. Pons et al.

Summary: A multi-criteria decision-making approach has been proposed and validated to assess the sustainability index of concrete pile foundations. The study found that polymeric fiber-reinforced concrete piles are the most sustainable option due to their cost-structural efficiency ratio, high durability, and minimal risks during construction. Steel fiber-reinforced concrete alternatives were also found to be more sustainable than traditional reinforced concrete.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Characterization of a textile waste nonwoven fabric reinforced cement composite for non-structural building components

Payam Sadrolodabaee et al.

Summary: The construction industry depletes large amounts of nonrenewable resources and generates millions of tons of mineral waste and carbon dioxide annually. Research and promotion of the use of recycled materials are essential for a more sustainable consumption pattern. Investigating textile waste as reinforcement for cement-based matrices shows promise in enhancing ductility and cracking control.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

CO2 sequestration by construction and demolition waste aggregates and effect on mortars and concrete performance-An overview

Ricardo Infante Gomes et al.

Summary: Global warming, caused by the increase of greenhouse gases in the atmosphere, particularly CO2, calls for urgent reduction of emissions. Construction and demolition waste (CDW) as recycled aggregates (RA) in construction materials is limited, but CO2 curing treatment positively impacts their performance in mortars and concrete.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Polymer Science

Mechanical Response and Analysis of Cracking Process in Hybrid TRM Composites with Flax Textile and Curaua Fibres

Giuseppe Ferrara et al.

Summary: This study aims at improving the mechanical behavior of Flax TRMs by adding curaua fibers, resulting in a denser crack pattern, significant decrease in crack width, and around 45% increase in dissipated energy. The overall tensile response of the Flax TRMs including curaua fibers approaches the ideal three-linear behavior of strain-hardening TRM composites. This paves the way for further analysis to enhance the mechanical performance of Natural TRMs using sustainable improvement techniques.

POLYMERS (2021)

添加到收藏夹

Article Construction & Building Technology

Tensile behavior of flax textile reinforced lime-mortar: Influence of reinforcement amount and textile impregnation

Giuseppe Ferrara et al.

Summary: The study demonstrates that using flax textiles to strengthen mortar systems can improve tensile response and reduce cracking. Furthermore, exploring pre-treatment methods for textiles can further enhance the performance of TRM systems.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Eco-efficient industrial waste recycling for the manufacturing of fibre reinforced innovative geopolymer mortars: Integrated waste management and green product development through LCA

Francesco Colangelo et al.

Summary: The aim of this research is to evaluate the possibility of using an eco-sustainable geopolymer binder and develop innovative technologies for water systems management. A detailed environmental assessment comparison of unreinforced and reinforced geopolymer prototypes has been conducted using Life Cycle Assessment (LCA). The results show that geopolymers have advantages as an effective alternative to traditional binders in industrial environments and hydraulic engineering.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Physical

A Textile Waste Fiber-Reinforced Cement Composite: Comparison between Short Random Fiber and Textile Reinforcement

Payam Sadrolodabaee et al.

Summary: Millions of tons of textile waste are generated worldwide annually, which can be used as internal reinforcement for cement-based composites to enhance ductility and reduce crack propagation. Through experimental analysis, it was confirmed that the optimal composite is reinforced with six layers of nonwoven fabric, suitable for nonstructural concrete structures such as facade cladding, raised floors, and pavements.

MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Multifunctional cork - alkali-activated fly ash composites: A sustainable material to enhance buildings' energy and acoustic performance

Rui M. Novais et al.

ENERGY AND BUILDINGS (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete

Kate T. Q. Nguyen et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Life Cycle Assessment of Prefabricated Geopolymeric Facade Cladding Panels Made from Large Fractions of Recycled Construction and Demolition Waste

Davor Kvocka et al.

MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Free and restrained plastic shrinkage of cementitious materials made of engineered kraft pulp fibres

Emad Booya et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of an Impregnation Treatment on the Morphology and Mechanical Behaviour of Flax Yarns Embedded in Hydraulic Lime Mortar

Giuseppe Ferrara et al.

FIBERS (2019)

添加到收藏夹

Article Construction & Building Technology

Life cycle assessment (LCA) of double-skin facade (DSF) system with fiber-reinforced concrete for sustainable and energy-efficient buildings in the tropics

Rotana Hay et al.

BUILDING AND ENVIRONMENT (2018)

添加到收藏夹

Article Construction & Building Technology

Comparative study on the properties of three hydraulic lime mortar systems: Natural hydraulic lime mortar, cement-aerial lime-based mortar and slag-aerial lime-based mortar

Dajiang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystal development during carbonation of lime-based mortars in different environmental conditions

Duygu Ergenc et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Construction & Building Technology

Accelerating carbonation in lime-based mortar in high CO2 environments

Duygu Ergenc et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Review Construction & Building Technology

Thermal conductivity of concrete - A review

Iman Asadi et al.

JOURNAL OF BUILDING ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Sustainability based-approach to determine the concrete type and reinforcement configuration of TBM tunnels linings. Case study: Extension line to Barcelona Airport T1

A. de la Fuente et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Towards the sustainability in the design of wind towers

Oriol Pons et al.

INTERNATIONAL CONFERENCE - ALTERNATIVE AND RENEWABLE ENERGY QUEST (AREQ 2017) (2017)

添加到收藏夹

Article Chemistry, Physical

Tensile and Flexural Properties of Cement Composites Reinforced with Flax Nonwoven Fabrics

Josep Claramunt et al.

MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Textile fibre waste bindered with natural hydraulic lime

Maria del Mar Barbero-Barrera et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Acoustic absorption of hemp-lime construction

Oliver Kinnane et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Natural fiber nonwoven reinforced cement composites as sustainable materials for building envelopes

Josep Claramunt et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Multi-Criteria Decision Making in the sustainability assessment of sewerage pipe systems

Albert de la Fuente et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Construction & Building Technology

Multicriteria Decision-Making Method for Sustainable Site Location of Post-Disaster Temporary Housing in Urban Areas

S. M. Amin Hosseini et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2016)

添加到收藏夹

Article Construction & Building Technology

Multicriteria Decision-Making Method for Sustainable Site Location of Post-Disaster Temporary Housing in Urban Areas

S. M. Amin Hosseini et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2016)

添加到收藏夹

Proceedings Paper Transportation

Knowledge-based minimization of railway infrastructures environmental impact

Francisco Barrientos et al.

TRANSPORT RESEARCH ARENA TRA2016 (2016)

添加到收藏夹

Review Construction & Building Technology

Cellulosic fiber reinforced cement-based composites: A review of recent research

Monica Ardanuy et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Construction & Building Technology

Recycled nylon fibers as cement mortar reinforcement

Saverio Spadea et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Energy & Fuels

Innovative panels with recycled materials: Thermal and acoustic performance and Life Cycle Assessment

P. Ricciardi et al.

APPLIED ENERGY (2014)

添加到收藏夹

Review Engineering, Manufacturing

Green composites: A review of material attributes and complementary applications

Michael P. M. Dicker et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Article Materials Science, Textiles

Effects of needling parameters on some structural and physico-mechanical properties of needle-punched nonwovens

Heura Ventura et al.

JOURNAL OF THE TEXTILE INSTITUTE (2014)

添加到收藏夹

Article Construction & Building Technology

Fibre-reinforced lime-based mortars: A possible resource for ancient masonry restoration

F. Iucolano et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Sustainability Assessment of Concrete Structures within the Spanish Structural Concrete Code

Antonio Aguado et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2012)

添加到收藏夹

Article Construction & Building Technology

Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars

A. Izaguirre et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Value Function for Assessing Sustainability: Application to Industrial Buildings

Bibiana Alarcon et al.

SUSTAINABILITY (2011)

添加到收藏夹

Review Construction & Building Technology

Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions

Mercedes del Rio Merino et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

添加到收藏夹

Article Thermodynamics

Mechanical, Hygric, and Thermal Properties of Cement-Based Composite with Hybrid Fiber Reinforcement Subjected to High Temperatures

Eva Vejmelkova et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2009)

添加到收藏夹

Article Archaeology

Comparative evaluation of lime mortars for architectural conservation

Paulina Faria et al.

JOURNAL OF CULTURAL HERITAGE (2008)

添加到收藏夹

Article Construction & Building Technology

Pore structure and mechanical properties of cement-lime mortars

M. Arandigoyen et al.

CEMENT AND CONCRETE RESEARCH (2007)

添加到收藏夹

Article Materials Science, Paper & Wood

Thermal properties of wood-gypsum boards

P. Bekhta et al.

HOLZ ALS ROH-UND WERKSTOFF (2006)

添加到收藏夹

Article Chemistry, Physical

Variation of microstructure with carbonation in lime and blended pastes

M. Arandigoyen et al.

APPLIED SURFACE SCIENCE (2006)

添加到收藏夹

Article Construction & Building Technology

Study of hydrated phases present in a MK-lime system cured at 60 °C and 60 months of reaction

Moises Frias Rojas

CEMENT AND CONCRETE RESEARCH (2006)

添加到收藏夹

Article Construction & Building Technology

Forced and natural carbonation of lime-based mortars with and without additives:: Mineralogical and textural changes

G Cultrone et al.

CEMENT AND CONCRETE RESEARCH (2005)

添加到收藏夹

Article Archaeology

Calcium carbonate binding mechanisms in the setting of calcium and calcium-magnesium putty-limes

DT Beruto et al.

JOURNAL OF CULTURAL HERITAGE (2005)

添加到收藏夹

Article Construction & Building Technology

Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres

RD Toledo et al.

CEMENT & CONCRETE COMPOSITES (2005)

添加到收藏夹

Article Construction & Building Technology

Carbonation reaction of lime, kinetics at ambient temperature

K Van Balen

CEMENT AND CONCRETE RESEARCH (2005)

添加到收藏夹

Article Construction & Building Technology

Microstructure of fire-damaged concrete. A case study

B Georgali et al.

CEMENT & CONCRETE COMPOSITES (2005)

添加到收藏夹

Article Construction & Building Technology

Influence of storage conditions on the carbonation of powdered Ca(OH)2

RM Dheilly et al.

CONSTRUCTION AND BUILDING MATERIALS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.