☆ 4.7 Review

A critical review on the properties of natural fibre reinforced concrete composites subjected to impact loading

JOURNAL OF BUILDING ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Preparation of biomimetic functionalized hierarchical bamboo fibers for reinforcing plant protein-based adhesives

Xiaorong Liu et al.

Summary: Bioinspired functionalized hierarchical fibers were constructed by anchoring catechol-modified metal-organic frameworks (MOFs) onto bamboo fiber surfaces to enhance the performance of soybean meal-based adhesives. The fibers with hierarchical structures can create a material gradient and decrease stress concentration, thus enhancing energy dissipation. The wet/dry shear strengths of the resulting adhesives were significantly increased by 96.87% and 66.46%.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2023)

添加到收藏夹

Article Engineering, Civil

Efficient simulation of non-stationary non-homogeneous wind field: Fusion of multi-dimensional interpolation and NUFFT

Tianyou Tao et al.

Summary: An efficient approach is developed for the simulation of non-stationary non-homogeneous wind field, using multi-dimensional interpolation to decouple evolutionary spectra and non-uniform FFT to expedite the simulation. The approach establishes a surrogate model for the 3D evolutionary spectrum and applies NUFFT to speed up the summation of trigonometric functions. The enhanced approach avoids unnecessary simulation points and is almost independent of the number of simulation points.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of fly ash and waste glass powder as a fractional substitute on the performance of natural fibers reinforced concrete

Fadi Althoey et al.

Ain Shams Engineering Journal (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Application of natural fibres in cement concrete: A critical review

Hussein M. Hamada et al.

Summary: Sustainability of building materials can be achieved through the use of natural fibres, which can reduce environmental threats in cement-based materials. However, the moisture absorption and hydrophilic behavior of natural fibres can weaken their bonding with the concrete matrix, affecting the overall performance of concrete. Physical and chemical treatments can enhance the aging resistance of natural fibres, while optimizing binder components and curing regimes can delay their degradation. The porous nature and weak interface of natural fibres can increase the permeability of concrete, but using them in fabric production or extracting cellulose nanocrystals/nanofibres can enhance their effectiveness.

MATERIALS TODAY COMMUNICATIONS (2023)

添加到收藏夹

Article Construction & Building Technology

Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance

Oguzhan Yavuz Bayraktar et al.

Summary: The objective of this research is to investigate the effects of hemp fiber lengths and percentages on the properties of hemp fiber-reinforced alkali-activated composite. The results show that the addition of 20mm hemp fibers significantly improves the compressive strength, flexural strength, and thermal conductivity of the composite. High-temperature alkali cooking treatments also enhance the thermal stability of hemp fiber cellulose.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Natural fiber-reinforced shotcrete mixture: Quantitative assessment of the impact of fiber on fresh and plastic shrinkage cracking properties

Seunghak Choi et al.

Summary: The plastic stage of early-age shotcrete life is crucial for durability. Utilizing natural fibers is an effective strategy to extend the service life and mitigate plastic cracking. A statistical model (multiple regression model) was used to analyze the impact of fiber type, length, and content on mixture optimization. The results demonstrate that fiber integration creates a spatial network structure, greatly enhancing the shear resistance of the material. This fibrous network prevents plastic cracking by providing initial mechanical strength and a strong matrix to withstand shrinkage stress. Thus, a rheological model was proposed to characterize fiber mixtures with improved tensile strain capacity through viscosity and yield stress development.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Impact resistance of flax FRP fully wrapped coconut fibre reinforced concrete beams and shear contribution of FRP

Wenjie Wang et al.

Summary: This study investigates the behavior of fully wrapped coconut fiber reinforced concrete (CFRC) beams reinforced with flax fiber reinforced polymer (FFRP) and the contribution of FRP to shear strength under impact loadings. Both repeated and single drop-weight tests were carried out on beams with three different FFRP wrapping thicknesses. The results showed that the impact resistance of fully FFRP wrapped beams increased nonlinearly with thickness. The damage mechanism of concrete beams and the shear contribution of FFRP in CFRC were also influenced by the FRP thicknesses. The proposed method of calculating the shear contribution of FFRP fit well with experimental values.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Acoustics

Efficient buffeting analysis of long-span bridges under non-stationary winds: A 2D interpolation enhanced approach

Tianyou Tao et al.

Summary: The buffeting analysis of long-span bridges under non-stationary winds is crucial but traditional approaches are computationally inefficient. This study proposes an enhanced approach using 2D interpolation for efficient analysis of non-stationary buffeting responses. The approach significantly reduces computational resources and efforts by solving the governing equations only at limited interpolation knots. Parametric analysis and case studies verify its effectiveness in simulating non-stationary buffeting responses of long-span bridges with high efficiency and accuracy.

JOURNAL OF SOUND AND VIBRATION (2023)

添加到收藏夹

Article Construction & Building Technology

Research on dynamic splitting damage characteristics and constitutive model of basalt fiber reinforced concrete based on acoustic emission

Hua Zhang et al.

Summary: This study investigated the effects of loading rate and fiber content on the mechanical properties and acoustic emission characteristics of basalt fiber reinforced concrete (BFRC) under dynamic splitting tests. The results showed that the tensile strength is enhanced with increasing loading rate, and adding basalt fibers also has a similar effect. Optimal fiber contents were found to be 0.1% and 0.15%. Additionally, it was observed that loading rate and fiber content significantly impact the AE characteristics, and the modified constitutive model successfully described the mechanics behavior of BFRC under dynamic splitting loads.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Review Engineering, Civil

A critical review on experimental investigation and finite element analysis on structural performance of kenaf fibre reinforced concrete

B. A. Solahuddin

Summary: This review paper examines the effect of kenaf fibre usage on the structural performance of reinforced concrete based on previous studies. The results show that kenaf fibre at certain volume fractions improves the mechanical properties of concrete. Experimental and finite element analysis demonstrate that the inclusion of kenaf fibre enhances the structural performance of reinforced concrete.

STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

被撤回的出版物: Synergistic effects of modified sheep wool fibers on impact resistance and strength properties of concrete composites (Retracted article. See vol. 380, 2023)

Rayed Alyousef et al.

Summary: Sheep wool is a natural renewable fiber composite material with environmental, ecological, and economic advantages. However, natural fibers have certain drawbacks. Surface modification of natural fibers can improve their performance, and the addition of sheep wool in concrete composites can enhance tensile strength and impact resistance, increasing concrete ductility and energy absorption capacity.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Research on energy dissipation and damage evolution of dynamic splitting failure of basalt fiber reinforced concrete

Huanzhen Xie et al.

Summary: The experimental study shows that the appropriate amount of basalt fiber can effectively improve the dynamic tensile strength and energy dissipation of concrete. The dynamic splitting process can be divided into different stages, and the loading level promotes the dissipated energy of basalt fiber reinforced concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Review Construction & Building Technology

Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review

Jawad Ahmad et al.

Summary: This study discusses various techniques to enhance the properties of natural fibers used in concrete and shows that incorporating fibers with synthetic fibers prioritized can promote environmentally friendly and long-term solutions in the construction industry. The study recommends using 1.0% fiber to improve the tensile capacity of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

An Integrated Approach to Using Sheep Wool as a Fibrous Material for Enhancing Strength and Transport Properties of Concrete Composites

Rayed Alyousef et al.

Summary: This study investigates the influence of wool fibers on the strength and transport properties of concrete composites. The addition of wool fibers reduces the slump values and compressive strength of the concrete, but modified wool fiber (MWF) concrete achieves compressive strength values of more than 30 MPa after a 90-day curing period. Moreover, adding fibers with volume fractions of up to 2% reduces the sorptivity rate and chloride penetration of the concrete.

MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of oil palm fibre-reinforced polymer composites: a review

M. R. M. Asyraf et al.

Summary: In recent years, the use of natural fibres and biopolymers in many products has gained acceptance due to the serious reduction in petroleum resources and concerns about synthetic plastics. Lignocellulosic fibre polymer biocomposites, particularly those made from oil palm fibres (OPFs), have attracted attention for their wide availability, low carbon emission, and biodegradability. However, the mechanical properties of OPF biocomposites and the factors influencing their performance have not been thoroughly examined.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Construction & Building Technology

A study using a combined method of scientometric and manual analysis to review the present research of plant fibres reinforced concrete

Yunshi Pan et al.

Summary: This paper investigates the research progress of plant fiber reinforced concrete (PFRC), including its development scale, prevailing research domains, and knowledge progress. The challenges faced by PFRC and future research scope are also discussed.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Exploration of the protein conformation and mechanical properties of different spider silks

Min Wang et al.

Summary: This study analyzed the protein conformation and mechanical properties of web frame silks from spiders of different families. The results showed a correlation between fracture strength and crystallinity as well as protein conformation. Additionally, slight spectral differences in the Raman spectra allowed for preliminary identification and classification of spider silks. The findings of this study are important for the utilization of spider silks as biomaterials and the classification of spider silks.

JOURNAL OF MOLECULAR STRUCTURE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review

Xun Gao et al.

Summary: This study reviews the cell wall structure of bamboo fiber and its applications in composite materials. Bamboo fiber has high strength and renewability, making it an ideal reinforcing material. Chemical treatment and flame retardants can improve the performance of bamboo fiber. Short bamboo fiber shows better reinforcement effect in cement mortar.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Construction & Building Technology

Using sol-gel deposition of nanosilica to enhance interface bonding between sisal fiber and ultra-high performance concrete

Guosheng Ren et al.

Summary: This study suggests a new method of using sol-gel deposition of nanosilica on sisal fibers to improve the bonding interface with ultra-high performance concrete (UHPC). The results show that the nanosilica-coated fibers significantly improve the hydration, bond performance, and mechanical performance of the UHPC. The flexural strength and toughness of the UHPC reinforced with nanosilica-modified sisal fibers are increased, and the shrinkage effect is also improved.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Polymer Science

Dynamic Splitting Tensile Behaviour of Concrete Confined by Natural Flax and Glass FRP

Wenjie Wang et al.

Summary: This study investigates the dynamic splitting tensile properties of plain concrete confined by flax-fibre-reinforced polymer (FFRP) and glass-fibre-reinforced polymer (GFRP). The results show that both FFRP and GFRP can effectively increase the dynamic tensile strength of concrete, with FFRP-PC and GFRP-PC cylinders showing less sensitivity to strain rate compared with plain concrete.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Civil

Parametric investigation of GFRP-RCC jute fibre-reinforced recycled aggregate concrete elements

Mohamed Hechmi El Ouni et al.

Summary: This study investigates the axial compressive effectiveness of jute fibre-reinforced recycled aggregate concrete (RAC) columns, comparing them with columns reinforced with glass fibre-reinforced polymer (GFRP) bars. The results show that the GFRP reinforced columns have lower axial strength but higher deformation capacity compared to the steel reinforced columns. Eccentric loading has a significant impact on the axial strength of both types of columns.

STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Dynamic compressive behaviour of hybrid basalt-polypropylene fibre-reinforced concrete under confining pressure: Experimental characterisation and strength criterion

Qiang Fu et al.

Summary: The study investigated the dynamic compressive behavior of HBPRC under confining pressure, showing strain rate and confining pressure dependence. The addition of basalt and polypropylene fibers can reduce failure degree of concrete and improve shear failure feature. Furthermore, the study established an empirical dynamic strength criterion for HBPRC considering the effects of fiber and pore structure.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Review Construction & Building Technology

Performance of cementitious composites reinforced with chopped basalt fibres - An overview

Adeyemi Adesina

Summary: This paper provides an overview of the use of basalt fibres in cementitious composites and discusses the enhancement of mechanical properties with the incorporation of basalt fibres. However, further research is needed to fully understand the impact of basalt fibres on compressive strength and durability performance of cementitious composites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Influence of acrylic latex and pre-treated hemp fibers on cement based mortar properties

S. Candamano et al.

Summary: This study investigates a strategy to improve interaction at the fiber-matrix interface and tailor matrix resistance to penetration in hemp fiber-reinforced cement-based mortars. The chemical modification of hemp fibers and matrix modification using an acrylic elastomeric polymer dispersion are effective in improving the thermal and mechanical properties of the composites. The results show that the chemical pre-treatment removes impurities from hemp fibers, providing a cleaner surface and higher thermal stability, resulting in enhanced mechanical performance and crack resistance in the composites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

A novel hemp-fiber bio-composite material for strengthening of arched structures: Experimental investigation

M. Gioffre et al.

Summary: This study introduces a sustainable composite material made of hemp fibers and natural matrix for strengthening masonry structures. Experimental tests are conducted to evaluate the mechanical characteristics and structural performance of the composite material in strengthening masonry arches. The effectiveness of the strengthening is assessed through vertical load tests and tilt tests, comparing the results with unstrengthened masonry arches.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Use of water hyacinth waste to produce fibre-reinforced polymer composites for concrete confinement: Mechanical performance and environmental assessment

Tidarut Jirawattanasomkul et al.

Summary: The research investigates the use of water hyacinth wastes for producing fibre-reinforced polymer composite as a strengthening material, which has acceptable mechanical properties for concrete strengthening purposes. Compared to conventional fibre-reinforced polymer composites, the environmental friendliness of water hyacinth fibre-reinforced polymer composite is highlighted, showing reduced water consumption during production and natural waste reduction.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Agricultural Engineering

Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing

Ping Cheng et al.

Summary: This study aimed to investigate the mechanical properties and interfacial analysis of 3D printed continuous vegetal fiber reinforced biomass based composites. The results showed that the mechanical behaviors of the biocomposites were influenced by the interfacial properties between deposited layers and between fiber/matrix interfaces. By controlling the printing parameters, significant microstructure changes were observed in the biocomposites, leading to the highest tensile strength found at specific printing conditions.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Banana fibre: a natural and sustainable bioresource for eco-friendly applications

Sanjeev Balda et al.

Summary: Banana fibre, extracted from different parts of the banana plant, shows great potential for various industrial applications due to its easy availability and high-quality properties. The fibre can be used in the production of a wide range of products, offering eco-friendly alternatives to traditional materials.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2021)

添加到收藏夹

Article Mechanics

Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests

Yu-lei Bai et al.

Summary: This study experimentally investigated the dynamic compressive behaviors of concrete confined with unidirectional natural flax fiber reinforced polymers (FFRPs) under axial impact load. The results showed that the FFRP jacket confinement can improve the impact resistance of concrete, with sensitivity to strain rate and increased confinement stiffness leading to enhanced mechanical properties.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Dynamic compressive properties of novel lightweight ambient-cured EPS geopolymer composite

Zhixing Li et al.

Summary: Geopolymer as an eco-friendly and alternative cementitious material has been intensively investigated, particularly in terms of its dynamic compressive properties and energy absorption capacity for applications subjected to dynamic loads. The research on the relationship between strain rate and the performance of geopolymer composites with different EPS contents provides valuable insights for practical applications such as road barriers and lightweight building products.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Construction & Building Technology

Performance behaviour of macro-synthetic fibre reinforced concrete subjected to static and dynamic loadings for sleeper applications

Christophe Camille et al.

Summary: This study evaluates the performance of macro-synthetic fibre reinforced concrete under static and dynamic loadings, focusing on mechanical properties and failure mechanisms. It is found that fibre reinforced concrete helps improve durability and reduce damage caused by thermal cycles.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Renovation Effect of Flax FRP-Reinforced Cracked Concrete Slabs under Impact Loadings

Wenjie Wang et al.

Summary: Experimental and theoretical analysis were conducted to investigate the impact behavior of FFRP renovated CFRC slabs, showing the potential of FFRP composites as renovated construction materials under dynamic load conditions.

MATERIALS (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites-A comprehensive review

G. Rajeshkumar et al.

Summary: The development of sustainable bio composites is driven by environmental concerns globally, with biodegradable polymers and natural fibers playing a vital role in this field. While PLA has distinct advantages, blending it with natural fibers is necessary to overcome its limitations and improve performance.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Fresh and mechanical characteristics of roselle fibre reinforced self-compacting concrete incorporating fly ash and metakaolin

R. Prakash et al.

Summary: The incorporation of roselle fibre reduced the workability of self-compacting concrete but improved mechanical characteristics. Higher fibre content resulted in increased compressive strength, splitting tensile strength, modulus of rupture, and modulus of elasticity. However, a 4% fibre addition may lead to a slight decrease in compressive strength and modulus of elasticity of the self-compacting concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Projectile impact resistance of fibre-reinforced geopolymer-based ultra-high performance concrete (G-UHPC)

Jian Liu et al.

Summary: This paper presents the mix design of geopolymer-based ultra-high performance concrete with compressive strength, and evaluates the impact resistance of G-UHPC targets with and without fibres through projectile impact tests. Results show that the addition of fibres in G-UHPC effectively reduces depth of penetration, crater damage and crack propagation, with steel fibres of certain specifications showing the best performance. Additionally, a calibrated KCC model is used to analyze projectile impact performance and predict perforation limits of G-UHPC for protective structure design.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Deflection of reinforced concrete beam under low-velocity impact loads

Yongjae Yu et al.

Summary: This study conducted impact tests on 15 RC beams and proposed a new empirical formula to evaluate the deflection of reinforced concrete beams from drop weight impact tests. The validity of both the experimental results and the new formula was analytically verified through parametric studies.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Textiles

Effect of Sheep Wool Fibers on Thermal Insulation and Mechanical Properties of Cement-Based Composites

V. Fiore et al.

JOURNAL OF NATURAL FIBERS (2020)

添加到收藏夹

Article Construction & Building Technology

Dynamic compressive behaviour of coconut fibre-reinforced concrete composite

Wenjie Wang et al.

MAGAZINE OF CONCRETE RESEARCH (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

PLA/banana fiber based sustainable biocomposites: A manufacturing perspective

Ujendra Kumar Komal et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

A comparative study of impact behaviour between natural flax and glass FRP confined concrete composites

Wenjie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Use of agriculture waste as short discrete fibers and glass-fiber-reinforced-polymer rebars in concrete walls for enhancing impact resistance

Shehryar Ahmed et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Review Polymer Science

Potential Natural Fiber Polymeric Nanobiocomposites: A Review

K. M. Faridul Hasan et al.

POLYMERS (2020)

添加到收藏夹

Article Mechanics

Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites

Tidarut Jirawattanasomkul et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Chemical

Interfacial bond behaviour between hybrid carbon/basalt fibre composites and concrete under dynamic loading

Cheng Yuan et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparative analysis of natural fiber reinforced polymer and carbon fiber reinforced polymer in strengthening of reinforced concrete beams

Cheng Chen et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Review Construction & Building Technology

A review of mechanical properties of fibre reinforced concrete at elevated temperatures

Heyang Wu et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Polymer Science

Progressive Failure and Energy Absorption of Chopped Bamboo Fiber Reinforced Polybenzoxazine Composite under Impact Loadings

Kai Zhang et al.

POLYMERS (2020)

添加到收藏夹

Article Construction & Building Technology

Impact response of two-layered grouted aggregate fibrous concrete composite under falling mass impact

M. K. Haridharan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and impact resistance of a high-strength lightweight concrete incorporating prickly pear fibres

Abderraouf Trabelsi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Effective adsorption of Au(III) and Cu(II) by chemically treated sheep wool and the binding mechanism

Solongo Enkhzaya et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Review Construction & Building Technology

A review of properties of bio-fibrous concrete exposed to elevated temperatures

Oluwatobi Gbenga Aluko et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Polymer Science

Recent developments in bamboo fiber-based composites: a review

Adamu Muhammad et al.

POLYMER BULLETIN (2019)

添加到收藏夹

Article Mechanics

An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites

Lehua Qi et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Mechanics

Basalt-based fiber-reinforced materials and structural applications in civil engineering

Elisabetta Monaldo et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Sorption behaviour of bamboo fibre reinforced composites, why do they retain their properties?

Delphine E. C. Depuydt et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biosynthesis and characterization of graphene by using non-toxic reducing agent from Allium Cepa extract: Anti-bacterial properties

P. Noorunnisa Khanam et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Construction & Building Technology

Improving the impact resistance and dynamic properties of jute fiber reinforced concrete for rebars design by considering tension zone of FRC

Tasaddaq Hussain et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Impact resistance of hybrid fibre reinforced concrete containing sisal fibres

Srinivasa Rao Naraganti et al.

AIN SHAMS ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Construction & Building Technology

Flexural properties and impact behaviour analysis of bamboo cellulosic fibers filled cement based composites

Xiaoli Xie et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Review Construction & Building Technology

Impact resistance of fiber-reinforced concrete - A review

Doo-Yeol Yoo et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Effect of natural fibre reinforced polymers on confined compressive strength of concrete

Tidarut Jirawattanasomkul et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Dynamic compressive mechanical behaviour and modelling of basalt-polypropylene fibre-reinforced concrete

Qiang Fu et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Shear strengthening of reinforced concrete beam using natural fibre reinforced polymer laminates

Md. Ashraful Alam et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Experimental and theoretical studies of flax FRP strengthened coconut fibre reinforced concrete slabs under impact loadings

Wenjie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Effectiveness of hair and wave polypropylene fibers for concrete roads

Mehran Khan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Flexural behaviour of FFRP wrapped CFRC beams under static and impact loadings

Wenjie Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Review Construction & Building Technology

Bamboo reinforced concrete: a critical review

Hector Archila et al.

MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Article Construction & Building Technology

Impact characterization and modelling of basalt-polypropylene fibrer-reinforced concrete containing mineral admixtures

Qiang Fu et al.

CEMENT & CONCRETE COMPOSITES (2018)

添加到收藏夹

Article Mechanics

Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts

Zongjun Li et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Engineering Properties and Impact Resistance of Kenaf and Rice Straw Fibres Reinforced Concrete

Muhammad Zulhamdi Abdul Mulok et al.

JURNAL KEJURUTERAAN (2018)

添加到收藏夹

Article Construction & Building Technology

Comparative Study of the Wind Characteristics of a Strong Wind Event Based on Stationary and Nonstationary Models

Tianyou Tao et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Structure and mechanical behavior of human hair

Yang Yu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Article Construction & Building Technology

Comparative Study of the Wind Characteristics of a Strong Wind Event Based on Stationary and Nonstationary Models

Tianyou Tao et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhanced impact properties of cementitious composites reinforced with pultruded flax/polymeric matrix fabric

Magdi El-Messiry et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Construction & Building Technology

Behaviour of CFRC beams strengthened by FFRP laminates under static and impact loadings

Wenjie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

Experimental study on dynamic mechanical properties and constitutive model of basalt fiber reinforced concrete

Huang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Seismic retrofitting of RC walls externally strengthened by flax-FRP strips

G. Di Luccio et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Review Construction & Building Technology

Hybrid short fiber reinforcement system in concrete: A review

H. R. Pakravan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

The use of wool as fiber-reinforcement in cement-based mortar

Alessandro P. Fantilli et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Engineering, Civil

Behavior of fiber-reinforced polymer-strengthened reinforced concrete beams under static and impact loads

Thong M. Pham et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Pull-out response of macro synthetic fibre from concrete matrix: Effect of loading rate and embedment length

A. J. Babafemi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

The behaviour of coconut fibre reinforced concrete (CFRC) under impact loading

Wenjie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Acoustics

Oil palm empty fruit bunch fibres as sustainable acoustic absorber

Khai Hee Or et al.

APPLIED ACOUSTICS (2017)

添加到收藏夹

Article Chemistry, Physical

Investigations of plasma induced effects on the surface properties of lignocellulosic natural coir fibres

K. M. Praveen et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Construction & Building Technology

Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites

Libo Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Impact resistance of oil palm shells concrete reinforced with polypropylene fibre

Javad Yahaghi et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Fracture behaviour of a fibre reinforced earthen material under static and impact flexural loading

F. Aymerich et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites

Chao-Lung Hwang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Impact resistance of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) under pendulum impact loadings

R. Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Static and dynamic properties of concrete with different types and shapes of fibrous reinforcement

Aiman Hasan Hamood Al-Masoodi et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Review Engineering, Civil

Influences of the volume fraction and shape of steel fibers on fiber-reinforced concrete subjected to dynamic loading - A review

Leila Soufeiani et al.

ENGINEERING STRUCTURES (2016)

添加到收藏夹

Article Materials Science, Textiles

Influence of fibre dispersion on compression strength of banana fibres reinforced concrete

Samrat Mukhopadhyay et al.

JOURNAL OF INDUSTRIAL TEXTILES (2016)

添加到收藏夹

Review Engineering, Civil

Review of Concrete Structures Strengthened with FRP Against Impact Loading

Thong M. Pham et al.

STRUCTURES (2016)

添加到收藏夹

Review Engineering, Manufacturing

A review of the recent developments in biocomposites based on natural fibres and their application perspectives

T. Gurunathan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

A review on basalt fibre and its composites

V. Fiore et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

A. Alavudeen et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Composites

Can silk become an effective reinforcing fibre? A property comparison with flax and glass reinforced composites

Darshil U. Shah et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Construction & Building Technology

Impact resistance of hybrid fibre-reinforced oil palm shell concrete

Kim Hung Mo et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Construction & Building Technology

Flexural strength and impact resistance study of fibre reinforced concrete in simulated aggressive environment

Wai Hoe Kwan et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Construction & Building Technology

Investigation of usability of basalt fibers in hot mix asphalt concrete

Nihat Morova

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Materials Science, Composites

A comparative study of steel reinforced concrete and flax fibre reinforced polymer tube confined coconut fibre reinforced concrete beams

Libo Yan et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fracture and impact properties of short discrete jute fibre-reinforced cementitious composites

Xiangming Zhou et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Review Materials Science, Paper & Wood

Bamboo fiber and its reinforced composites: structure and properties

Dagang Liu et al.

CELLULOSE (2012)

添加到收藏夹

Review Engineering, Manufacturing

Critical review of recent publications on use of natural composites in infrastructure

David B. Dittenber et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Construction & Building Technology

Mechanical and dynamic properties of coconut fibre reinforced concrete

Majid Ali et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

添加到收藏夹

Article Construction & Building Technology

Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets

N. Attari et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

添加到收藏夹

Review Polymer Science

Natural Fiber Reinforced Composites

Michael A. Fuqua et al.

POLYMER REVIEWS (2012)

添加到收藏夹

Review Polymer Science

Biocomposites reinforced with natural fibers: 2000-2010

Omar Faruk et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

A review on the tensile properties of natural fiber reinforced polymer composites

H. Ku et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Article Agricultural Engineering

Towards industrial utilization of oil palm fibre: Physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources

S. Shinoj et al.

BIOSYSTEMS ENGINEERING (2010)

添加到收藏夹

Article Chemistry, Applied

Isolation of nanocellulose from pineapple leaf fibres by steam explosion

Bibin Mathew Cherian et al.

CARBOHYDRATE POLYMERS (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading

Weimin Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Review Chemistry, Applied

Biofibres and biocomposites

Maya Jacob John et al.

CARBOHYDRATE POLYMERS (2008)

添加到收藏夹

Article Engineering, Manufacturing

Properties of hemp fibre reinforced concrete composites

ZJ Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Microscopy

Nanomechanical characterization of human hair using nanoindentation and SEM

GH Wei et al.

ULTRAMICROSCOPY (2005)

添加到收藏夹

Article Construction & Building Technology

Impact strength of a few natural fibre reinforced cement mortar slabs: a comparative study

G Ramakrishna et al.

CEMENT & CONCRETE COMPOSITES (2005)

添加到收藏夹

Article Mechanics

Influence of thermal treatment on tensile failure of basalt fibers

J Militky et al.

ENGINEERING FRACTURE MECHANICS (2002)

添加到收藏夹

Article Construction & Building Technology

Effects of alkali-resistant glass fiber reinforcement on crack and temperature resistance of lightweight concrete

FA Mirza et al.

CEMENT & CONCRETE COMPOSITES (2002)

添加到收藏夹

Article Materials Science, Composites

Sisal fibre and its composites: a review of recent developments

Y Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.