4.7 Article

MXene-based 2D Ti3C2Tx nanosheets for highly efficient cadmium (Cd2+) adsorption

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Environmental Sciences

Multifunctional cobalt oxide nanocomposites for efficient removal of heavy metals from aqueous solutions

Abdelaziz El Mouden et al.

Summary: In this study, super NC@Co3O4 nanocomposites with excellent salinity resistance, environmental stability, and reusability were synthesized through co-precipitation synthesis of natural clay (NC) with Co3O4 nanoparticles (NPs). The NC@Co3O4 adsorbent exhibited easy synthesis and biocompatibility. The adsorption efficiency of NC@Co3O4 nanocomposites for Pb(II) and Cd(II) ions reached up to 86.89% and 82.06% respectively. The study also demonstrated that NC@Co3O4 nanoadsorbents have versatile applications in pollutant removal from wastewater.

CHEMOSPHERE (2023)

Article Environmental Sciences

Removal of cadmium and lead ions from aqueous solutions by novel dolomite-quartz@Fe3O4 nanocomposite fabricated as nanoadsorbent

Abdelaziz El Mouden et al.

Summary: The composite Fe3O4 nanoparticles (DQ@Fe3O4) based on natural clay (dolomite and quartz) have been extensively studied for the removal of heavy metal ion contaminants from residual waters. Optimized experimental parameters showed that DQ@Fe3O4 achieved maximum removals of 95.02% for Pb2+ and 86.89% for Cd2+ at specific conditions. Characterization techniques confirmed the co-precipitation of dolomite-quartz by Fe3O4 nanoparticles. Kinetic and equilibrium studies further supported the suitability of pseudo-second-order kinetic and Langmuir isotherm models for metal binding onto the DQ@Fe3O4 surface. Thermodynamic and Monte Carlo simulation data demonstrated the spontaneity and effectiveness of the adsorption process. In summary, DQ@Fe3O4 can be considered as a cost-effective adsorbent with great potential for wastewater treatment.

ENVIRONMENTAL RESEARCH (2023)

Article Chemistry, Multidisciplinary

Dithiocarbamate modification of activated carbon for the efficient removal of Pb(II), Cd(II), and Cu(II) from wastewater

Huai-Yuan Niu et al.

Summary: In this study, dithiocarbamate functionalized activated carbon (DTC-AC) was synthesized and its adsorption performance for heavy metals Pb(II), Cu(II), and Cd(II) was investigated. The results showed that DTC-AC had higher heavy metal adsorption capacity, and pH played an important role in heavy metal removal. The adsorption equilibrium was reached within 20 minutes. The Langmuir model best described the adsorption performance of DTC-AC, with a maximum single metal uptake of 203.36 mg g(-1) for Pb(II). Thermodynamic parameters indicated that the adsorption process of heavy metals onto DTC-AC was spontaneous and endothermic. This study demonstrated the potential of DTC-AC in remediating heavy metal pollution.

NEW JOURNAL OF CHEMISTRY (2022)

Review Engineering, Chemical

Recent advances in applications of low-cost adsorbents for the removal of heavy metals from water: A critical review

Muhammad Bilal et al.

Summary: This review critically evaluates the modern developments in applications of bio-sorbents in water purification with an emphasis on adsorption. It describes in detail the heavy metals adsorption onto different bio-waste derived adsorbents, including the adsorption mechanism and their regeneration abilities. Major challenges, hurdles, and opportunities are discussed, along with a roadmap and future research recommendations to ensure the effective applications of bio-sorbents in water purification systems.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Environmental Sciences

A critical overview of MXenes adsorption behavior toward heavy metals

Zakarya Othman et al.

Summary: This review investigates the adsorption capabilities of MXenes as adsorbents for heavy metals and the effect of different synthesis methods on their remediation behavior. It compares the influence of MXene engineering strategies on surface properties and adsorption capacity and discusses adsorption mechanisms, coexisting ions' effect on selectivity, regeneration, stability, and biocompatibility of MXenes. Recommendations for further research are provided.

CHEMOSPHERE (2022)

Article Thermodynamics

Experimental study and theoretical statistical modeling of acid blue 25 remediation using activated carbon from Citrus sinensis leaf

Noureddine El Messaoudi et al.

Summary: In this study, citrus sinensis leaf activated carbon (CSLAC) was synthesized for the removal of acid blue 25 (AB25) dye from water. The CSLAC demonstrated high surface area and permeability, allowing for efficient removal of contaminants. Experimental and theoretical modeling confirmed the effectiveness of CSLAC as an inexpensive adsorbent with good regeneration and reusability.

FLUID PHASE EQUILIBRIA (2022)

Article Materials Science, Multidisciplinary

Modification of low-cost adsorbent prepared from agricultural solid waste for the adsorption and desorption of cationic dye

Mohammed El Khomri et al.

Summary: This study focused on the adsorption and desorption of methylene blue dye using almond shell modified with sodium hydroxide. The results showed that the modified almond shell has promising potential for dye removal and can be regenerated for reuse.

EMERGENT MATERIALS (2022)

Article Environmental Sciences

Evaluation of the Adsorptive Performances of Rapeseed Waste in the Removal of Toxic Metal Ions in Aqueous Media

Teodora Arsenie et al.

Summary: This study investigates the use of rapeseed waste biomass (RWB) as a biosorbent for removing toxic metal ions from aqueous media. Experimental results suggest that RWB is an effective biosorbent for environmental decontamination processes.
Review Energy & Fuels

Regeneration and reusability of non-conventional low-cost adsorbents to remove dyes from wastewaters in multiple consecutive adsorption-desorption cycles: a review

Noureddine El Messaoudi et al.

Summary: The rapid growth of the global economy has resulted in severe anthropogenic pollution, particularly in the aquatic systems. Traditional treatment methods create new forms of pollution, necessitating the need for innovative regeneration techniques for polluted adsorbents. Low-cost adsorbents can be regenerated using different desorbing agents and have high potential for reusability.

BIOMASS CONVERSION AND BIOREFINERY (2022)

Article Chemistry, Multidisciplinary

Optimization Based on Response Surface Methodology of Anionic Dye Desorption From Two Agricultural Solid Wastes

Mohammed El Khomri et al.

Summary: This study evaluated the desorption of Congo red dye from agricultural solid wastes such as Argan nutshell and Almond shell. The results showed that these waste materials exhibited high adsorption capacity and efficient desorption under optimized conditions, making them suitable for wastewater treatment.

CHEMISTRY AFRICA-A JOURNAL OF THE TUNISIAN CHEMICAL SOCIETY (2022)

Article Chemistry, Multidisciplinary

Date Stone Functionalized with 3-Aminopropyltriethoxysilane as a Potential Biosorbent for Heavy Metal Ions Removal from Aqueous Solution

Abdelaziz El Mouden et al.

Summary: A novel biosorbent based on date stones and 3-aminopropyltriethoxysilane was successfully prepared. The synthesized biomaterial showed high removal efficiencies for heavy metal ions from aqueous solutions, following both Langmuir and Freundlich isotherms models. The material has potential applications as an efficient adsorbent for heavy metal removal.

CHEMISTRY AFRICA-A JOURNAL OF THE TUNISIAN CHEMICAL SOCIETY (2022)

Article Materials Science, Ceramics

Effective removal of Cr(VI) and methyl orange from the aqueous environment using two-dimensional (2D) Ti3C2Tx MXene nanosheets

Perumal Karthikeyan et al.

Summary: This study successfully investigated the use of two-dimensional MXenes as an adsorbent for removing Cr(VI) and MO from water. The MXenes showed fast removal rates, good regeneration ability, and high adsorption efficiency, demonstrating its selectivity and feasibility as an effective adsorbent.

CERAMICS INTERNATIONAL (2021)

Review Chemistry, Physical

Toxicity of heavy metals in plants and animals and their uptake by magnetic iron oxide nanoparticles

Ata Ur Rehman et al.

Summary: Heavy metals pose a serious threat to plants and animals, leading to organ damage and diseases. Water, especially drinking water, is a major source of exposure. Magnetic iron oxide nanoparticles have emerged as the ultimate choice for water purification due to their eco-friendly, cost-effective, and easy-to-use properties.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Ti3C2Tx MXene playing as a strong methylene blue adsorbent in wastewater

Nghe My Tran et al.

Summary: This study demonstrates that mostly F-terminated Ti3C2Tx MXene can serve as a strong adsorbent for methylene blue (MB) in wastewater, showing promise for environmental remediation applications.

APPLIED SURFACE SCIENCE (2021)

Review Engineering, Environmental

Microalgal biosorption of heavy metals: A comprehensive bibliometric review

Aristotle T. Ubando et al.

Summary: The release of heavy metals in industrial effluents poses risks to the environment and society. Microalgae can thrive in this harmful environment and serve as an ideal medium for biosorption. This study comprehensively reviews the use of microalgae for heavy metals removal, identifying factors affecting biosorption performance and outlining methods for quantifying heavy metals concentration.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

Removal of heavy metal cations and co-existing anions in simulated wastewater by two separated hydroxylated MXene membranes under an external voltage

Saidi Wang et al.

Summary: Hydroxylated MXene membrane shows improved wettability and Zeta potential compared to pristine MXene membrane, leading to better rejection and separation of ions. The membrane demonstrates high rejection rates of heavy metal cations and co-existing anions, with selective separation permeance on specific ion pairs. Additionally, the hydroxylated MXene membrane exhibits good operational durability and reproducibility, highlighting its potential for wastewater treatment.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Inorganic & Nuclear

MXenes and MXene-based Materials for the Removal of Water Pollutants: Challenges and Opportunities

Mehrdad Khatami et al.

Summary: MXenes have attractive properties for water treatment, but challenges such as aggregation and environmental risks still need to be evaluated and addressed for their extensive deployment.

COMMENTS ON INORGANIC CHEMISTRY (2021)

Article Biotechnology & Applied Microbiology

Enhanced removal of cadmium from water using bio-sorbents synthesized from branches and leaves of Capparis decidua and Ziziphus mauritiana

Muhammad Bilal et al.

Summary: In this study, powdered adsorbents synthesized from branches and leaves of Capparis decidua (CDB) and Ziziphus mauritiana (ZML) were found effective in removing potentially toxic cadmium ions from wastewater. The adsorption process was influenced by various parameters and followed a pseudo-second order kinetic model. Both bio-sorbents showed good agreement with Freundlich and Langmuir adsorption isotherms, and thermodynamic analysis indicated spontaneous and exothermic nature of the Cd(II) adsorption. The prepared adsorbents also exhibited excellent regeneration potential with minor loss in adsorption capacities after multiple cycles.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Article Chemistry, Physical

Ultra-high oil-water separation membrane based on two-dimensional MXene(Ti3C2Tx) by co-incorporation of halloysite nanotubes and polydopamine

Guangyong Zeng et al.

Summary: The study successfully modified MXene by using Halloysite nanotubes and polydopamine to create a composite membrane with high hydrophilicity and effective oil-water separation properties. The composite membrane showed great potential for applications with its high pure water flux and excellent anti-fouling ability.

APPLIED CLAY SCIENCE (2021)

Article Materials Science, Ceramics

3D flower like 8-MnO2/MXene Nano-hybrids for the removal of hexavalent Cr from wastewater

Abdul Rehman Khan et al.

Summary: 3D flower-like 8-MnO2, MXene, and 8-MnO2/MXene in-situ hybrid composites were synthesized for effective removal of Cr (VI) from contaminated water, with maximum adsorption capacities of 235.65 mg g-1, 273.1 mg g-1, and 353.87 mg g-1, respectively. The study showed that the pH of the solution significantly influences the removal of Cr (VI) and the adsorption mechanism conforms to pseudo-second-order and Freundlich models. The hetero-engineered approach of synthesizing transition metal oxides with MXenes offers promising opportunities for efficient contaminant removal from water.

CERAMICS INTERNATIONAL (2021)

Article Environmental Sciences

Kinetics, isotherm and chemical speciation analysis of Hg(II) adsorption over oxygen-containing MXene adsorbent

Xiaolan Hu et al.

Summary: The study found that the two-dimensional MXene showed good adsorption performance for heavy metal mercury ions in wastewater treatment, especially under low pH conditions. It also maintained a high adsorption capacity at high temperatures and different pH values.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Fabrication of MXene/PEI functionalized sodium alginate aerogel and its excellent adsorption behavior for Cr(VI) and Congo Red from aqueous solution

Yilin Feng et al.

Summary: The MXene/PEI modified sodium alginate aerogel (MPA) showed excellent adsorption capacity for both Cr(VI) and Congo Red, with strong mechanical strength and antibacterial properties, making it suitable for wide applications in water treatment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Engineering, Environmental

Technological trends in heavy metals removal from industrial wastewater: A review

Rakesh Shrestha et al.

Summary: Rapid industrialization has led to heavy metal contamination in industrial wastewater, and traditional removal methods have limitations such as high sludge production and low removal efficiency. Newer, more efficient and innovative technologies are being investigated, with research evaluating the efficiency dependence on various parameters.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Removing copper and cadmium from water and sediment by magnetic microspheres- MnFe2O4/chitosan prepared by waste shrimp shells

Yanhao Zhang et al.

Summary: The waste shrimp shells were used to produce chitosan (CS) and coated with MnFe2O4 to form novel adsorbents (MCMS) with good adsorption performance for Cu(II) and Cd(II). The adsorption process is spontaneous and exothermic, following pseudo-first-order and Langmuir models with maximum removal capacities of 62.3 and 60.6 mg g(-1).

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Effective removal of Pb(ii) from synthetic wastewater using Ti3C2Tx MXene

Byung-Moon Jun et al.

ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY (2020)

Review Chemistry, Multidisciplinary

Conventional and non-conventional adsorbents for wastewater treatment

Gregorio Crini et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2019)

Article Engineering, Environmental

Ti3C2Tx MXene core-shell spheres for ultrahigh removal of mercuric ions

Asif Shahzad et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Materials Science, Multidisciplinary

Efficient removal of Pb(II) by Ti3C2Tx powder modified with a silane coupling agent

Yingchao Du et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Review Chemistry, Multidisciplinary

Removal of heavy metal ions from aqueous system by ion-exchange and biosorption methods

Arshid Bashir et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2019)

Article Green & Sustainable Science & Technology

Microstructure and surface control of MXene films for water purification

Xiuqiang Xie et al.

NATURE SUSTAINABILITY (2019)

Review Chemistry, Multidisciplinary

Two-Dimensional Metal Nanomaterials: Synthesis, Properties, and Applications

Ye Chen et al.

CHEMICAL REVIEWS (2018)

Article Engineering, Environmental

Mercuric ion capturing by recoverable titanium carbide magnetic nanocomposite

Asif Shahzad et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Review Environmental Sciences

Valorisation possibilities of exhausted biosorbents loaded with metal ions - A review

Iulia Simona Badescu et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Article Chemistry, Physical

Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2TX MXene)

Mohamed Alhabeb et al.

CHEMISTRY OF MATERIALS (2017)

Article Nanoscience & Nanotechnology

Two-Dimensional Titanium Carbide for Efficiently Reductive Removal of Highly Toxic Chromium(VI) from Water

Yulong Ying et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Engineering, Environmental

Effect of carbon nanotubes on Cd(II) adsorption by sediments

Weiling Sun et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Multidisciplinary Sciences

Global water resources affected by human interventions and climate change

Ingjerd Haddeland et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)