4.7 Article

?-Graphyne adjusted diffusion-capacitance behavior of lithium titanate for boosting high-rate and wide-temperature lithium storage

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Enhancing the rate performances of Li4Ti5O12 by Mo4+doping and MoO2-Mo dispersed on the surface

Litao Li et al.

Summary: This study successfully improved the electrochemical performance of Li4Ti5O12 at high current density and increased its capacity retention through doping and interfacial modification. The modified material exhibited lower charge transfer resistance and higher diffusion coefficient of lithium ions.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Chemistry, Multidisciplinary

Li1.4Al0.4Ti1.6(PO4)3-Modified Li4Ti5O12 Anode for Lithium-Ion Storage with Enhanced Rate and Cycling Performance

Tianyu Zhu et al.

Summary: Coating Li4Ti5O12 (LTO) with Li1.4Al0.4Ti1.6(PO4)3 (LATP) ion conductors improves ion transport rate and interface stability, leading to optimized capacity and cycling stability. The LATP-modified LTO composites provide potential for further applications in the energy storage field.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Article Chemistry, Multidisciplinary

Improving the Cyclability and Rate Capability of Li4Ti5O12 Anode Material by Cu2+ and F- co-Doping

Meisam Kahrizi et al.

Summary: We have reported a new anode material, Li4Ti5-xCuxO11.7F0.3 (X=0.1, 0.15, 0.2, 0.25, 0.3), for Li-ion batteries. Among these modified Li4Ti5O12 (LTO) materials, Li4Ti4.75Cu0.25O11.7F0.3 (LTCu0.25OF0.3) exhibits the best cyclability and rate ability. LTCu0.25OF0.3 delivers high discharge capacities at different current rates and shows excellent capacity retention after 100 charge and discharge cycles. The improved electrochemical performance is attributed to lower polarization and charge transfer resistance, as well as a higher Li+ diffusion coefficient.

CHEMISTRYSELECT (2023)

Article Chemistry, Physical

Porous Li4Ti5O12-induced cathode electrolyte interphases enable sustainable single-crystalline NCM cathodes

Lijun Xiong et al.

Summary: The cathode electrolyte interphase (CEI) layer on the cathode surface of lithium-ion batteries (LIBs) greatly affects their performance. In this study, porous Li4Ti5O12 particles were introduced onto the surface of LiNi0.5Co0.2Mn0.3O2 cathodes using metal-organic frameworks (MOFs) to enhance the CEI layer formation and improve the capacity and stability of the electrodes.

APPLIED SURFACE SCIENCE (2023)

Article Electrochemistry

Oxygen vacancy-modulated zeolitic Li4Ti5O12 microsphere anode for superior lithium-ion battery

Seohyeon Yeo et al.

Summary: Porous zeolitic Li4Ti5O12 (LTO) microspheres improve the ionic/electronic conductivity and structural stability of LTO, leading to enhanced performance in lithium-ion batteries.

ELECTROCHIMICA ACTA (2023)

Article Electrochemistry

Two-dimensional graphene-based Li4Ti5O12 with hierarchical pore structure and large pseudocapacitive effect as high-rate and long-cycle anode material for lithium-ion batteries

Xi Chen et al.

Summary: Large-scale 2D graphene-based Li4Ti5O12 with hierarchical pore structure is synthesized by controllable synthesis of amorphous TiO2 nanofilms on graphene and subsequent conversion to nanoparticle-assembled Li4Ti5O12 nanosheets. The nanosheets exhibit small nanoparticle composition and designed micro-mesopores, which facilitate Li+ diffusion, offer a large interface for Li+ adsorption, and provide considerable pseudocapacitive Li storage. The graphene substrate serves as conductive support and maintains the 2D shape structure. This hierarchically structured Li4Ti5O12 composite demonstrates superior reversible capacity and cycling stability at high rates.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Physical

Bias-free synthesis of hydrogen peroxide from photo-driven oxygen reduction reaction using N-doped γ-graphyne catalyst

Qiaodan Li et al.

Summary: This research demonstrates a method for generating hydrogen peroxide using sunlight to power selective 2e(-) ORR, with a high selectivity and yield of H2O2. The synthesized N-doped gamma-graphyne catalyst showed superior performance compared to traditional photocatalytic methods for H2O2 synthesis.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Materials Science, Ceramics

Self-supported Li4Ti5O12 nanobelt array anode with long-life and improved low-temperature performance for flexible lithium-ion batteries

Wei Qin et al.

Summary: A novel self-supported Li4Ti5O12 nanobelt array with high surface area and excellent performance has been successfully fabricated, showing great potential for high performance flexible energy storage devices, especially at low temperatures.

CERAMICS INTERNATIONAL (2022)

Article Electrochemistry

Enhancements of the structures and electrochemical performances of Li4Ti5O12 electrodes by doping with non-metallic elements

Yanan Li et al.

Summary: This study systematically explores the effect of non-metallic element (F, Cl, Br, I, C, and N) doping modification on lithium titanate oxide (LTO) electrode materials. The results show that C, N, and Br dopants play a significant role in improving the electrochemical performance of LTO, with each dopant having different advantages. C dopant reduces particle size and agglomeration, Br dopant increases unit cell volume, and N dopant forms oxygen vacancies and TiN structures. In terms of electrochemical performance, C dopant reduces charge transfer resistance, Br dopant improves capacity at low rates, and N dopant enhances high rate performance of LTO. This study provides new insights into optimizing the electrochemical performance of lithium titanate by adjusting its morphology, crystal structure, and electronic structure based on non-metallic materials' characteristics.

ELECTROCHIMICA ACTA (2022)

Article Electrochemistry

In situ growth of Li4Ti5O12 nanoparticles on Ti3C2Tx MXene for efficient electron transfer as high-rate anode of Li ion battery

Kangdong Tian et al.

Summary: In this study, monodispersed LTO nanoparticles were successfully prepared on Ti3C2Tx MXene in situ through a natural oxidation and hydrothermal lithiation process, showing oriented growth and advantages for high-rate performance.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Physical

The effect of sodium and niobium co-doping on electrochemical performance of Li4Ti5O12 as anode material for lithium-ion batteries

S. Patat et al.

Summary: Na+- and Nb5+-co-doped Li3.98Na0.02Ti4.98Nb0.02O12 (NaNbLTO) is synthesized as an anode material for lithium-ion batteries. The co-doping of Na+ and Nb5+ improves the electronic conductivity and discharge capacity of the material, demonstrating a synergistic effect. This makes NaNbLTO a promising anode material for lithium-ion batteries.

IONICS (2022)

Article Chemistry, Physical

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

Xiao Xiao et al.

Summary: Te-doped Li4Ti5O12 prepared by the ball milling-assisted solid-state method exhibited improved ionic and electronic conductivities, leading to enhanced performance in lithium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

VPO5: An all-climate lithium-storage material

Siyuan Ma et al.

Summary: This study explores VPO5 as a promising anode material for all-climate lithium-ion batteries (LIBs) in battery electric vehicles (BEVs). VPO5's unique crystal structure allows for fast lithium ion transport and storage, resulting in good electrochemical performance in low to high temperature conditions.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Green aqueous binder poly(N-vinylformamide) for high-rate capability Li4Ti5O12 anode in lithium-ion batteries

Yen-Liang Chu et al.

Summary: In order to pursue sustainable developments, this study investigates the application of poly(N-vinylformamide) (PNVF) as a green, bio-derived and water-soluble binder for Li4Ti5O12 (LTO) anode in lithium-ion batteries (LIBs). The electrochemical performance differences between PNVF electrodes and conventional polyvinylidene fluoride (PVDF) electrodes are presented. The results demonstrate that the electrode with 3 wt% PNVF shows higher peeling force and better cycle performance compared to the one with 10 wt% PVDF. Additionally, the optimal PNVF electrode exhibits lower electrochemical impedance and higher lithium-ion diffusion coefficient.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Regulating symmetry of organic precursors for mechanochemical synthesizing rich pyridonic-/pyridinic-nitrogen doped graphyne

Yuxuan Lu et al.

Summary: This study successfully synthesized graphyne material with rich pyridinic- and pyridonic-nitrogen doping via a mechanochemical route. The introduction of symmetric hexabromobenzene was found to suppress the formation of graphitic carbon impurities. By optimizing the material ratio, the obtained graphyne material exhibited higher energy storage capacity and structural stability.

CARBON (2022)

Article Chemistry, Physical

Porous layered SnO2-LTO@C as a high-performance anode material for lithium-ion batteries

Menghan Zhu et al.

Summary: A porous layered SnO2-Li4Ti5O12@C composite was successfully prepared using hydrothermal, freeze-drying, and calcination methods. The composite exhibits a stable structure and enhanced cycle stability. With embedded SnO2 nanoparticles and carbon coating, the composite shows excellent electrochemical performance with high-rate and reversible specific capacities.

IONICS (2022)

Article Chemistry, Physical

Sulfur-doped graphene promoted Li4Ti5O12@C nanocrystals for lithium-ion batteries

Zan Huang et al.

Summary: A sulfur-doped graphene modified Li4Ti5O12@C nanocomposite (SG-T@C) was successfully fabricated via a sol-gel method assisted with solid-state route. The composite showed homogeneously dispersed Li4Ti5O12@C nanocrystals and the introduced sulfur-doped graphene acted as a conductive bridge, improving the electrical conductivity. The SG-T@C exhibited excellent high-rate performance and cycling stability, making it a promising electrode material for lithium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Rapid Construction of LTO/CuO Heterojunctions by Active Screen Plasma for Excellent Lithium-Ion Storage

Shangqi Sun et al.

Summary: In this study, Li4Ti5O12/CuO heterojunctions were constructed by depositing CuO ultrafine nanoparticles on Li4Ti5O12 nanosheets using ASP technique. The heterojunctions provided rich interface and built-in electric field, enhancing the conductivity and performance of Li4Ti5O12. The treated sample showed excellent electrochemical properties and cycle stability.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Conductive LaCeNb6O18 with a Very Open A-Site-Cation-Deficient Perovskite Structure: A Fast- and Stable-Charging Li+-Storage Anode Compound in a Wide Temperature Range

Wenze Wang et al.

Summary: LaCeNb6O18 (LCNO) micrometer-sized particles are explored as a superior anode material to sub-micrometer-sized Li4Ti5O12 (LTO) particles, with better working potential, rate capability, and high-temperature performance. LCNO has higher electronic conductivity, faster Li+ diffusivity, and low- and negative-strain behavior at different temperatures.

ADVANCED ENERGY MATERIALS (2022)

Article Nanoscience & Nanotechnology

Important Impact of the Slurry Mixing Speed on Water-Processed Li4Ti5O12 Lithium-Ion Anodes in the Presence of H3PO4 as the Additive

Yun Xu et al.

Summary: This study investigates the effect of ball milling speed on the effectiveness of phosphoric acid as a slurry additive for lithium transition metal oxide electrodes. The results show that at higher ball milling speeds, beneficial rod-shaped lithium phosphate particles are formed, leading to improved electrochemical performance and long-term cycling stability in lithium ion cells.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Inorganic & Nuclear

Self-assembled Li4Ti5O12/rGO nanocomposite anode for high power lithium-ion batteries

Wei Fang et al.

Summary: LTO/reduced graphene oxide (rGO) composite anodes with unique hierarchical structure show improved electronic conductivity, Li(+) diffusion kinetics, and lithium storage capacity. The composite exhibits high specific discharge capacity, excellent cycling life, and capacity retention at high-rate discharging.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

Enhanced electrochemical performance of Li4Ti5O12 anode material by LaF3 surface modification for lithium-ion batteries

Aijia Wei et al.

Summary: LaF3-modified Li4Ti5O12 materials were synthesized using a chemical co-precipitation method, and their effects on the material's morphology, structure, and electrochemical performance were investigated. The results showed that adding 1 wt% LaF3 improved the capacity and cycling stability of the material, while reducing polarization and charge transfer resistance.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

Article Chemistry, Physical

Zero-strain K2SrV4O12 as a high-temperature friendly Li+-storage material

Qian Zhang et al.

Summary: Researchers have developed K2SrV4O12 as a high-temperature friendly anode material for lithium-ion batteries, demonstrating superior high-temperature cyclability and "zero-strain" behavior.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Facile synthesis of surface fluorinated-Li4Ti5O12/carbon nanotube nanocomposites for a high-rate capability anode of lithium-ion batteries

Il-Seop Jang et al.

Summary: In this study, surface fluorinated-LTO/CNT nanocomposites were prepared by complexing bulk LTO particles and carbon nanotubes via mechanofusion, then fluorinated using NH4F. The nanocomposites exhibited excellent electrochemical performance as anodes for LIBs, with high specific capacity and stability, outperforming bulk LTO particles by almost 2.3 times.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Physical

Nb-doped Li4Ti5O12-TiO2 hierarchical microspheres as anode materials for high-performance Li-ion batteries at low temperature

Qihan Meng et al.

Summary: The Nb-doped Li4Ti5O12-TiO2 (Nb-LTO-TO) hierarchical microspheres exhibited improved capacity and stability at low temperatures, providing a new approach for designing advanced anodes for high-performance Li-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Synthesis of wafer-scale graphdiyne/graphene heterostructure for scalable neuromorphic computing and artificial visual systems

Zhi-Cheng Zhang et al.

Summary: A modified van der Waals epitaxy strategy has been proposed for synthesizing wafer-scale GDY film with high uniformity and controllable thickness on graphene surface, providing an ideal platform for constructing large-scale GDY/Gr-based optoelectronic synapse arrays. This technology enables essential synaptic behaviors for neuromorphic computing and high-accuracy image recognition.

NANO RESEARCH (2021)

Article Chemistry, Multidisciplinary

Understanding and Calibration of Charge Storage Mechanism in Cyclic Voltammetry Curves

Xiangjun Pu et al.

Summary: This work successfully calibrates the different CSM contributions of three typical cathode materials and achieves a good distinction of physical capacitance, pseudo-capacitance, and diffusive contributions to the total capacity through special treatments and a non-linear fitting algorithm. It corrects misunderstanding concepts about pseudo-capacitance contribution and recognizes the essence of CSM in electrode materials.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Materials Science, Multidisciplinary

Mechanochemical constructing ordered rhombic channels in graphyne analogues for rapid potassium-ion storage

Yang Chen et al.

Summary: A new topological structure with unique ordered channels for rapid potassiation kinetics, represented by dihydrogen- and nitrogen/hydrogen-substituted rhombic graphynes, was successfully synthesized using a mechanochemical cross-coupling method. The NH-rGY electrode demonstrated outstanding structural stability and rapid K+ diffusion, showing potential for high-performance potassium storage applications.

2D MATERIALS (2021)

Article Chemistry, Inorganic & Nuclear

Assembling γ-graphyne surrounding TiO2 nanotube arrays: an efficient p-n heterojunction for boosting photoelectrochemical water splitting

Dong Qiu et al.

Summary: By constructing a γ-graphyne/TiO2 photoanode, the photocurrent density was increased while the electron lifetime of TiO2 was extended, which was attributed to moderate γ-graphyne modification, contributing to enhanced light absorption, suppressed recombination of electron-hole pairs, and higher injection efficiency of surface electrons.

DALTON TRANSACTIONS (2021)

Article Materials Science, Multidisciplinary

Mo3Nb14O44: A New Li+ Container for High-Performance Electrochemical Energy Storage

Renjie Li et al.

Summary: Mo3Nb14O44 is a promising Nb-based oxide anode compound with a high theoretical capacity and unique structure, exhibiting fast charge-discharge performance and high cycling stability.

ENERGY & ENVIRONMENTAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Two-dimensional γ-graphyne for ultrafast nonlinear optical applications

Xiaoyan Zhang et al.

OPTICAL MATERIALS EXPRESS (2020)

Editorial Material Multidisciplinary Sciences

A retrospective on lithium-ion batteries

Jing Xie et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Physical

Insight into effects of graphene and zinc oxide in Li4Ti5O12 as anode materials for Li-ion full-cell battery

Arsalan Naserieh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Multidisciplinary

Mechanochemical Synthesis of γ-Graphyne with Enhanced Lithium Storage Performance

Chaofan Yang et al.

Review Chemistry, Multidisciplinary

Graphdiyne: synthesis, properties, and applications

Xin Gao et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Li4Ti5O12 quantum dot decorated carbon frameworks from carbon dots for fast lithium ion storage

Lin Li et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

Review Chemistry, Physical

Si anode for next-generation lithium-ion battery

Wen-Feng Ren et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2019)

Review Multidisciplinary Sciences

Materials for lithium-ion battery safety

Kai Liu et al.

SCIENCE ADVANCES (2018)

Review Chemistry, Multidisciplinary

Progress in Research into 2D Graphdiyne-Based Materials

Changshui Huang et al.

CHEMICAL REVIEWS (2018)

Article Engineering, Electrical & Electronic

Scalable synthesis of TiO2 crystallites embedded in bread-derived carbon matrix with enhanced lithium storage performance

Yang Chen et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Materials Science, Multidisciplinary

Facile synthesis of cubic-phase lithium tungsten oxide and its application in lithium storage

Yang Chen et al.

MATERIALS LETTERS (2017)

Article Multidisciplinary Sciences

Hydrogen substituted graphdiyne as carbon-rich flexible electrode for lithium and sodium ion batteries

Jianjiang He et al.

NATURE COMMUNICATIONS (2017)

Review Chemistry, Physical

Challenges of Spinel Li4Ti5O12 for Lithium-Ion Battery Industrial Applications

Tao Yuan et al.

ADVANCED ENERGY MATERIALS (2017)

Article Nanoscience & Nanotechnology

Enhanced Rate Capability and Low-Temperature Performance of Li4Ti5O12 Anode Material by Facile Surface Fluorination

Yixiao Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Physical

Recent advances of Li4Ti5O12 as a promising next generation anode material for high power lithium-ion batteries

Ting-Feng Yi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Ti-based compounds as anode materials for Li-ion batteries

Guan-Nan Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)