☆ 4.8 Article

3D printing of high-temperature thick film platinum resistance temperature detector array

ADDITIVE MANUFACTURING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Flexible temperature sensor with high sensitivity ranging from liquid nitrogen temperature to 1200 °C

Zhaojun Liu et al.

Summary: This research proposes a flexible thermocouple temperature sensor based on an aerogel blanket substrate, which has good temperature sensitivity and can work in a wide range of temperatures. The sensor has great potential applications in fields like biomedicine and aerospace.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thin-Film Platinum Resistance Temperature Detector with a SiCN/Yttria-Stabilized Zirconia Protective Layer by Direct Ink Writing for High-Temperature Applications

Yingjun Zeng et al.

Summary: DIW technology and YSZ-modified precursor ceramic film packaging are used to fabricate a Pt RTD with high-temperature resistance, small disturbance, and high stability. The Pt RTD shows stability and repeatability at high temperatures and can withstand a butane flame up to 1300°C without damage. Additionally, the Pt RTD can be conformally deposited on aerospace bearings to realize on-site, nondestructive, and real-time temperature monitoring.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Materials Science, Ceramics

High-temperature electrical properties of polymer-derived ceramic SiBCN thin films fabricated by direct writing

Chao Wu et al.

Summary: In this study, SiBCN thin-film resistance grids were fabricated and tested for their resistance-temperature characteristics, stability, and repeatability in high-temperature environments. The results showed that the SiBCN films exhibited excellent oxidation resistance and electrical conductivity, making them suitable for in situ temperature monitoring of hot components in harsh environments.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Automation & Control Systems

Micromachined Thermocouple for Rapid Detection of Ultrahigh Heat Flux at High Temperature

Jiayu Wang et al.

Summary: This article presents a novel high temperature heat flux sensor that is capable of detecting transient high heat flux in ultrahigh temperature environments. The sensor has been designed and fabricated with excellent heat dissipation capacity, and experimental tests have shown its high sensitivity and fast response speed, making it highly competitive in extreme conditions.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

添加到收藏夹

Article Automation & Control Systems

Online cutting temperature prediction using ink-jet printed sensors and model order reduction method

Kuan-Ming Li et al.

Summary: This paper presents a method for measuring tool tip temperature using an ink-jet printed thermistor array. The method has high temperature sensitivity and fast response time. By using the finite element method and model order reduction method, it is possible to achieve online monitoring of tool tip temperature.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of micro-nano fabrication process on the temperature coefficient of resistance of platinum thin films resistance temperature detector

Weiming Lv et al.

Summary: The study found that the micro-nano fabrication process significantly affects the temperature coefficient of resistance of Pt RTD, with both chemical polishing and annealing processes effectively improving TCR.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Thin-film temperature sensor made from particle-filled polymer-derived ceramics pyrolyzed in vacuum

Zaifu Cui et al.

Summary: This study proposes the pyrolysis of polymer-derived ceramics (PDC) thin films in vacuum to solve the oxidation issue and verifies its application in high-temperature sensors. It provides a feasible method for the fabrication of high-temperature PDC thin-film sensors.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-Dimensional Printed Bimodal Electronic Skin with High Resolution and Breathability for Hair Growth

Shengbo Sang et al.

Summary: This study developed a 3D printed wearable electronic skin (e-skin) with breathability and the ability to promote hair growth. The e-skin achieved simultaneous pressure and temperature detection and had a high tactile resolution, making it suitable for individuals with neurological deficits. The design of the main structure was tailored for human hair distribution, and the e-skin was realized through multimaterial in situ 3D printing with high accuracy and consistency.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Noninvasive platinum thin-film microheater/temperature sensor array for predicting and controlling flow boiling in microchannels

Mark Schepperle et al.

Summary: In this study, a non-invasive platinum microheater/temperature sensor array has been developed for direct heating and temperature measurement in microchannels. This array offers fast response times and high accuracy, making it suitable for studying microchannel boiling and calculating heat transfer coefficients.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature Pt-Al2O3 composite nano-thick interdigital electrodes for surface acoustic wave sensors

Guangyao Pei et al.

Summary: This paper proposes a Pt-Al2O3 composite nano-thick interdigital electrode (IDEs) for high-temperature SAW sensors. The IDEs have good structural stability and low impurity concentration at high temperatures. Improved quality factors and matched electrical impedance can be achieved through electroacoustic optimization. Multiple SAW temperature sensors using the composite IDEs also perform well at higher temperatures.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Chemistry, Analytical

High-Temperature-Sensing Smart Bolt Based on Indium Tin Oxide/In2O3 Thin-Film Thermocouples with Nickel-Based Single-Crystal Superalloy via Screen Printing

Zhongkai Zhang et al.

Summary: In this study, a smart bolt was designed by combining thin-film thermocouples (TFTCs) to directly test high temperature for gas turbine structure design. The design of surface properties and dimension parameters were analyzed using first-principles calculation and finite element analysis. The microstructure of the films was studied with different particle sizes, and the optimum particle size was determined. The experimental results showed that the smart bolt had better thermal response and thermal balance compared to the traditional thermocouple.

CHEMOSENSORS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Infrared and Visible Image Fusion via Decoupling Network

Xue Wang et al.

Summary: This article proposes a decoupling network-based method for infrared and visible image fusion, which effectively retains the texture details and luminance information of the source images while preserving the high-contrast regions. Extensive experiments demonstrate that the proposed method generates fused images with saliency objects and clear details, outperforming other state-of-the-art methods.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved Ag-Si interface performance for Si solar cells using a novel Te-based glass and recrystallization process of Ag

Xin-Xin Pi et al.

Summary: The study shows that the Ag electrode with 3 wt% glass frit content has good adhesion with the Si wafer, and silver crystallites and metallic tellurium can be found on the Si wafer surface. This suggests that TeO2 in the glass frit can react with SiNx anti-reflecting coating (ARC) and Si to facilitate the formation of silver crystallites.

RARE METALS (2021)

添加到收藏夹

Review Energy & Fuels

Additive manufacturing for energy: A review

Cheng Sun et al.

Summary: The conflict between rapidly growing global energy demand and climate change calls for significant science and technology innovations. Advanced manufacturing, particularly additive manufacturing, shows potential in reducing greenhouse gas emissions and shortening time-to-market. Despite the energy-saving benefits demonstrated in various sectors, there are still key challenges to overcome in applying additive manufacturing technologies in nuclear energy and renewable energies.

APPLIED ENERGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Transient Measurement of Temperature Distribution Using Thin Film Thermocouple Array on Turbine Blade Surface

Zhonglin Ji et al.

Summary: Smart sensors are essential for achieving a more intelligent aero-engine, with a thin-film sensor array fabricated on the turbine blade surface using MEMS technology. The PtRh/Pt thin film thermocouples exhibit good stability and consistency on the blade surface, able to capture temperature distribution and respond quickly to dynamic heat flow.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A temperature field reconstruction method for spacecraft leading edge structure with optimized sensor array

Yulin Sun et al.

Summary: This paper proposes a method for reconstructing the temperature field on the curved surface of a spacecraft leading edge structure using a sparse sensor array, with improved accuracy by introducing arc-length distances. The distribution of the sensor array is optimized using the non-dominated sorting genetic algorithm II. The results demonstrate the importance of using search radius in optimizing the arrangement of the sensor array.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties of SiCf/SiC composite joints with CaO-Y2O3-Al2O3-SiO2 interlayer

Le Wang et al.

Summary: The study investigated the joining performance of CYAS glass powder sintered under different temperature conditions with SiCf/SiC composites. The joint prepared under 1400 degrees C/30 min condition was the densest, defect-free, with the highest shear strength.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Interpolation Method for Visual Simulation of Engine Exhaust Flame

Bo Cheng et al.

Summary: This study visualizes engine exhaust flame through a hybrid interpolation algorithm, enabling real-time monitoring of engine component functions. The proposed method effectively visualizes the engine exhaust flame, demonstrating a significant temperature peak at 0.7 m in the simulated plume flow field.

JOURNAL OF SENSORS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Joining of SiC ceramics using CaO-Al2O3-SiO2 (CAS) glass ceramics

Z. Sun et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stretchable and Heat-Resistant Protein-Based Electronic Skin for Human Thermoregulation

Jiani Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Aerospace

Robust Thin-Film Temperature Sensors Embedded on Nozzle Guide Vane Surface

Franklin Li Duan et al.

AIAA JOURNAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Electrical insulation improvements of ceramic coating for high temperature sensors embedded on aeroengine turbine blade

Haotian Weng et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of high temperature annealing on resistivity and temperature coefficient of resistance of sputtered platinum thin films of SiO2/Pt/SiOx interfaces

Timo Schoessler et al.

THIN SOLID FILMS (2020)

添加到收藏夹

Article Instruments & Instrumentation

Direct-write printing process of conductive paste on fiber bulks for wearable textile heaters

Hasan Shahariar et al.

SMART MATERIALS AND STRUCTURES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fabrication Techniques for Curved Electronics on Arbitrary Surfaces

Hao Wu et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Estimation of Combustion Temperature Field From the Electrical Admittivity Distribution Obtained by Electrical Tomography

Die Hu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Biomedical

Flexible and Stretchable Temperature Sensors Fabricated Using Solution-Processable Conductive Polymer Composites

Li Dan et al.

ADVANCED HEALTHCARE MATERIALS (2020)

添加到收藏夹

Article Thermodynamics

Investigation of sampling-probe distorted temperature fields with X-ray fluorescence spectroscopy

N. Hansen et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Temperature-resistance sensor arrays for combinatorial study of phase transitions in shape memory alloys and metallic glasses

Juanjuan Zheng et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Multidisciplinary Sciences

In situ characterization of the high pressure - high temperature melting curve of platinum

Simone Anzellini et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability of the platinum electrode during high temperature annealing

D. A. Golosov et al.

THIN SOLID FILMS (2018)

添加到收藏夹

Article Chemistry, Physical

Fabrication of highly conductive and flexible printed electronics by low temperature sintering reactive silver ink

Yun Mou et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Direct Write Fabrication of Platinum-Based Thick-Film Resistive Temperature Detectors

Alan Shen et al.

IEEE SENSORS JOURNAL (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Paper-Based Bimodal Sensor for Electronic Skin Applications

Minhyun Jung et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Thermodynamics

A method for two-dimensional temperature field distribution reconstruction

Ruixi Jia et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells

Jun Qin et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Cell integrated multi-junction thermocouple array for solid oxide fuel cell temperature sensing: N+1 architecture

Manoj Ranaweera et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Analytical

Performance and Durability of Thin Film Thermocouple Array on a Porous Electrode

Erdogan Guk et al.

SENSORS (2016)

添加到收藏夹

Article Engineering, Mechanical

Design and development of resistive temperature detector arrays on aluminium substrates. Measurements in mixing experiments

Francesco Paolo D'Aleo et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible Miniaturized Nickel Oxide Thermistor Arrays via Inkjet Printing Technology

Chun-Chih Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

添加到收藏夹

Article Chemistry, Analytical

Platinum thin film electrodes for high-temperature chemical sensor applications

Engin Ciftyuerek et al.

SENSORS AND ACTUATORS B-CHEMICAL (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fabrication using filler controlled pyrolysis and characterization of polysilazane PDC RTD arrays on quartz wafers

Sunghoon Jung et al.

SENSORS AND ACTUATORS A-PHYSICAL (2012)

添加到收藏夹

Article Energy & Fuels

Study on the measurement of temperature field using laser holographic interferometry

Jinrong Zhu et al.

FRONTIERS IN ENERGY (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Comparison of the agglomeration behavior of thin metallic films on SiO2

PR Gadkari et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)

添加到收藏夹

Article Chemistry, Multidisciplinary

A study on the fabrication of an RTD (resistance temperature detector) by using Pt thin film

J Kim et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.