☆ 4.8 Article

Direct modeling of the elastic properties of single 3D printed composite filaments using X-ray computed tomography images segmented by neural networks

ADDITIVE MANUFACTURING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Automated image segmentation of 3D printed fibrous composite micro-structures using a neural network

K. Nefs et al.

Summary: In this study, a new automated image segmentation method based on deep convolutional neural network is proposed to effectively identify micro-structural objects of 3D printed fibre-reinforced materials. The method uses training data created from a physical specimen, and the micro-structure is obtained from X-ray micro-computed tomography scanning. The neural network is trained to identify fibres in arbitrary directions, eliminating the need for manual annotation by human experts. The method is capable of accurately identifying complex micro-structures with arbitrarily distributed and oriented fibres.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Mechanics

Automatic segmentation and fibre orientation estimation from low resolution X-ray computed tomography images of 3D woven composites

Yannick Pannier et al.

Summary: In this study, different methods for automtic segmentation of microtomographic images in 3D woven carbon fibre composite materials are compared. Dense neural network approach fed with features based on the monogenic signal and features learned by a convolutional neural network are used. The monogenic signal with structure tensor approach is proposed for determining local fibre orientations in the composite. The best result is obtained by merging the monogenic and convolutional neural network features in a combination of the signal-based approach and the learning-based approach.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Stochastic semi-analytical modeling of reinforced filaments for additive manufacturing

E. Polyzos et al.

Summary: This study presents a new stochastic modeling approach to address challenges in micromechanical modeling of short-fiber composites. It introduces a stochastic generation technique based on kernel density estimation to save time and effort in fiber extraction, and a novel semi-analytical approach to consider multiple fibers while reducing computational effort. The approach is demonstrated on recycled poly(ethylene terephthalate) filaments reinforced with recycled short carbon fibers for additive manufacturing, showing similar predictions of elastic properties using only 40-50 fibers compared to a direct modeling approach with 1050 fibers, and close agreement with experimental data.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Mechanics

X-ray CT based multi-layer unit cell modeling of carbon fiber-reinforced textile composites: Segmentation, meshing and elastic property homogenization

Yuriy Sinchuk et al.

Summary: This paper presents a finite element model generation approach for carbon fiber reinforced textile composite based on micro-Computed Tomography images, using deep learning and material interface reconstruction algorithms to generate conformal and smooth finite element meshes.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Modeling elastic properties of 3D printed composites using real fibers

E. Polyzos et al.

Summary: The article investigates the microstructural morphology of 3D printed composites and the effect of microstructural irregularities on macrostructural elastic response through stochastic homogenization modeling. A novel methodology is introduced to generate realistic and ideal contours of carbon fibers, along with a method to generate single- and multiple-fiber representative volume elements in finite element software for approximating effective elastic properties. The results of numerical and semi-analytical modeling show good agreement with analytical models.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Computer Science, Theory & Methods

Computer Vision for Autonomous UAV Flight Safety: An Overview and a Vision-based Safe Landing Pipeline Example

Efstratios Kakaletsis et al.

Summary: Flight safety is a crucial issue in UAV navigation, especially when it comes to autonomous drones and UAV swarms. Although the main aspects of autonomous UAV technologies are well-covered, ensuring safe flying in unstructured environments, such as avoiding crowds and emergency landing, are often overlooked. This overview focuses on the importance of computer vision in addressing these safety issues and introduces a computer vision-based UAV flight safety pipeline.

ACM COMPUTING SURVEYS (2022)

添加到收藏夹

Article Mechanics

Geometrical and deep learning approaches for instance segmentation of CFRP fiber bundles in textile composites

Yuriy Sinchuk et al.

Summary: Segmentation of micro-Computed Tomography (mu CT) images of textile composites is crucial for modeling the material at the mesoscale, but accurate segmentation of fiber bundles in carbon fiber reinforced textile composites remains challenging. Existing segmentation approaches perform well under ideal conditions but struggle in practical applications, leading to the proposal of two new methodologies for splitting tow instances based on geometrical analysis and deep learning prediction. The deep learning-based method is trained using synthetic images to avoid the costly human annotation step.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Characterisation of void and fiber distribution in 3D printed carbon-fiber/PEEK using X-ray computed tomography

S. Sommacal et al.

Summary: The study found that the 3D printing process did not eliminate the voids present in the feedstock filament, and the variation of key printing parameters had minor effects on void content in the printed samples. However, the depositional nature of the printing process strongly influenced the internal geometry of the samples.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres

E. Polyzos et al.

Summary: Numerical modelling of 3D-printed Fused Filament Fabrication (FFF) specimens with thermoplastic matrices reinforced with continuous fibres, focusing on the elastic properties, revealed good correlation with analytical models for the micro- and meso-scale and with experimental data for the macro-scale, indicating validity and efficiency of the developed approach.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Composites

Descriptive modeling of textiles using FE simulations and deep learning

Arturo Mendoza et al.

Summary: In this research, a novel and fully automated method for extracting yarn geometrical features in woven composites is proposed, aiming to achieve direct parametrization of textile reinforcement. By using two deep neural network architectures (U-Net and Mask R-CNN), the method is accurate and robust for performing yarn instance segmentation on CT images, as demonstrated by quantitative and qualitative analyses.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Mechanics

A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties

S. M. Fijul Kabir et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Review Automation & Control Systems

A review on 3D printed matrix polymer composites: its potential and future challenges

Jabran Saroia et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Variational and Deep Learning Segmentation of Very-Low-Contrast X-ray Computed Tomography Images of Carbon/Epoxy Woven Composites

Yuriy Sinchuk et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Deep learning based semantic segmentation of μCT images for creating digital material twins of fibrous reinforcements

Muhammad A. Ali et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Composites

Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy

Siwon Yu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis

Hongshuai Lei et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

SLM lattice structures: Properties, performance, applications and challenges

Tobias Maconachie et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study

Haoqi Zhang et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Effective elastic properties of composites with particles of polyhedral shapes

Anton Trofimov et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

添加到收藏夹

Article Engineering, Biomedical

Micro-CT based finite element models of cancellous bone predict accurately displacement once the boundary condition is well replicated: A validation study

Yuan Chen et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Review Engineering, Multidisciplinary

3D printing of polymer matrix composites: A review and prospective

Xin Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Manufacturing

Generation of micro-scale finite element models from synchrotron X-ray CT images for multidirectional carbon fibre reinforced composites

R. M. Sencu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites

Seyyedvahid Mortazavian et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Mechanics

Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete

Wenyuan Ren et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Fast R-CNN

Ross Girshick

2015 IEEE INTERNATIONAL CONFERENCE ON COMPUTER VISION (ICCV) (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

On some controversial issues in effective field approaches to the problem of the overall elastic properties

Igor Sevostianov et al.

MECHANICS OF MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites

Rajneesh Sharma et al.

CARBON (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers

Kimiyoshi Naito et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-scale modeling of the elastic response of a structural component made from a composite material using the materials knowledge system

Hamad F. Al-Harbi et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coherent imaging at the Diamond beamline I13

Christoph Rau et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2011)

添加到收藏夹

Review Multidisciplinary Sciences

An efficient approach to converting three-dimensional image data into highly accurate computational models

P. G. Young et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2008)

添加到收藏夹

Review Computer Science, Information Systems

Content-based multimedia information retrieval: State of the art and challenges

Michael S. Lew et al.

ACM TRANSACTIONS ON MULTIMEDIA COMPUTING COMMUNICATIONS AND APPLICATIONS (2006)

添加到收藏夹

Article Materials Science, Composites

X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites

PJ Schilling et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Article Engineering, Biomedical

Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone

SVN Jaecques et al.

BIOMATERIALS (2004)

添加到收藏夹

Article Engineering, Multidisciplinary

Aspects of the computational testing of the mechanical properties of microheterogeneous material samples

TI Zohdi et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)

添加到收藏夹

Article Engineering, Multidisciplinary

A model for simulating the deterioration of structural-scale material responses of microheterogeneous solids

TI Zohdi et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.