☆ 4.6 Article

Analysis of the influence of vibration frequency and amplitude on ballast bed tamping operation in railway turnout areas

COMPUTATIONAL PARTICLE MECHANICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Real-time evaluation of mechanical qualities of ballast bed in railway tamping maintenance

Liang Gao et al.

Summary: This study aimed to evaluate the mechanical qualities of ballast beds by assessing the impact force on tamper. A novel test device was developed to accurately measure the impact force. Experimental results showed that tamping reduced the lateral resistance and support stiffness of the ballast bed. A tamping-ballasted track coupling model was constructed and validated, and a mathematical expression was developed to invert the mechanical qualities of ballast bed based on the impact force. This study achieved an innovative real-time evaluation of the ballast bed and provided a convenient and cost-effective way to gather health information of ballasted tracks.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Review Engineering, Civil

Under ballast mat - A review of recent developments, limitations, and future prospects

Rui Wang et al.

Summary: As trains become faster and heavier, there is an increasing frequency of loadings and excessive axle loads. Improving track design, particularly through the use of under ballast mats, is crucial for performance enhancement. These mats not only reduce noise, vibration, and ballast degradation, but also enhance the dynamic behavior of tracks, leading to a longer service life and increased safety.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2023)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Calibration method for discrete element modeling of ballast particles

Peyman Aela et al.

Summary: This research proposes an efficient method for calibrating the input parameters of the discrete element method (DEM) to simulate the behavior of ballast particles under static and dynamic loading conditions. The method involves creating clumps to describe the shape of particles and using different tests to calibrate parameters such as friction coefficients, Young's modulus, Poisson's ratio, and restitution coefficient.

COMPUTATIONAL PARTICLE MECHANICS (2023)

添加到收藏夹

Article Transportation Science & Technology

Macro-meso mechanical properties of ballast bed during three-sleeper tamping operation

Zhihai Zhang et al.

Summary: This study investigates the mechanism maintenance of the three-sleeper tamping operation. By establishing a tamping operation model, the properties of ballast particles and their changes during the tamping process are analyzed.

INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION (2023)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Numerical modelling of particle entrainment in the wheel-rail interface

Sadaf Maramizonouz et al.

Summary: The process of applying sand particles to increase traction between wheel and rail is reported to have an efficiency of less than 20%. The Discrete Element Method is used to simulate the process and the results are validated against experimental observations. The simulations confirm that the highest efficiency can be achieved when the sander is aimed at the wheel/rail nip.

COMPUTATIONAL PARTICLE MECHANICS (2023)

添加到收藏夹

Article Engineering, Civil

Numerical simulation of the three-sleeper asynchronous tamping operation of ballast bed based on the virtual unit module and polyhedral ballast model

Zhihai Zhang et al.

Summary: Reasonable asynchronous tamping operation is crucial for the performance of the ballast bed. A novel method of plane reconstruction and space fusion for rapid construction of polyhedral ballast particles is proposed to better simulate the three-sleeper asynchronous tamping operation. The contact force inside the ballast bed is analyzed using a new relative velocity friction model. The results verify the effectiveness of the coupling model of the three-sleeper asynchronous tamping machine-ballasted track.

TRANSPORTATION GEOTECHNICS (2023)

添加到收藏夹

Article Agronomy

Calibration of Contact Parameters for Particulate Materials in Residual Film Mixture after Sieving Based on EDEM

Pengfei Zhou et al.

Summary: In this study, the contact parameters of particulate materials were calibrated via a physical test and simulation test. The dynamic angle of repose of the particulate materials was measured at 41.32 degrees with a standard deviation of 1.33 degrees. A mathematical model of the dynamic angle of repose and the three most influential parameters was created through simulation experiments and optimization.

AGRICULTURE-BASEL (2023)

添加到收藏夹

Article Engineering, Civil

Evolution of trackbed performance and ballast degradation due to passages of million train wheel axle loads

Qiusheng Gu et al.

Summary: The increases in train speeds and wheel axle loads have a significant impact on ballasted tracks, leading to reduced trackbed performance and ballast breakage. The study shows that long-term train loads greatly increase the static and dynamic sleeper support stiffness, and ballast breakage and particle rearrangement contribute to the densification of the trackbed.

TRANSPORTATION GEOTECHNICS (2022)

添加到收藏夹

Review Engineering, Civil

Track Vertical Stiffness -Value, Measurement Methods, Effective Parameters and Challenges: A review

Yunyun Tong et al.

Summary: This paper comprehensively reviews the measurement methods, values, and effective parameters of vertical stiffness, and evaluates their contribution to rail-way track condition monitoring.

TRANSPORTATION GEOTECHNICS (2022)

添加到收藏夹

Article Construction & Building Technology

Discrete element analysis of the effect of manual tamping operation on the mechanical properties of ballast bed

Hong Xiao et al.

Summary: This paper uses the DEM-MBD co-simulation method to study the influence of manual tamping on the ballast track. The results show that manual tamping can improve the compactness and contact state of the ballast, as well as enhance the bearing capacity and load transmission path.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Rheology study of ballast-sleeper interaction with particle image Velocimetry (PIV) and discrete element modelling (DEM)

Yunlong Guo et al.

Summary: The study investigates ballast rheology, utilizing Particle Image Velocimetry to measure ballast particle displacements and calibrate the DEM model, showing the effectiveness of PIV technology. It is helpful for establishing more precise DEM models and providing theoretical methodology for ballast track construction and innovations.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Construction & Building Technology

Review of ballast track tamping: Mechanism, challenges and solutions

Yunlong Guo et al.

Summary: Railway ballast beds deteriorate due to various factors, leading to changes in track geometry, discomfort during travel and safety issues. Tamping is the most widely used means to address these issues, but there are still some research gaps that need to be addressed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Influence of a tamping operation on the vibrational characteristics and resistance-evolution law of a ballast bed

Jianxing Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Effect of tamping operation on mechanical qualities of ballast bed based on DEM-MBD coupling method

Shunwei Shi et al.

COMPUTERS AND GEOTECHNICS (2020)

添加到收藏夹

Article Engineering, Civil

Stone blowing as a remedial measure to mitigate differential movement problems at railroad bridge approaches

Huseyin Boler et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2019)

添加到收藏夹

Article Construction & Building Technology

Lateral resistance of polyurethane-reinforced ballast with the application of new bonding schemes: Laboratory tests and discrete element simulations

Guoqing Jing et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Parameters of a discrete element ballasted bed model based on a response surface method

Jie-ling Xiao et al.

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2019)

添加到收藏夹

Article Construction & Building Technology

Ballast degradation: Effect of particle size and shape using Los Angeles Abrasion test and image analysis

Yunlong Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Civil

Evaluation of ballast compactness during the tamping process by using an image-based 3D discrete element method

Dae Sang Kim et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2018)

添加到收藏夹

Article Engineering, Civil

Modelling the effects of trafficking and tamping on scaled railway ballast in triaxial tests

Sinthuja Aingaran et al.

TRANSPORTATION GEOTECHNICS (2018)

添加到收藏夹

Proceedings Paper Physics, Applied

DEM Analysis of Ballast Breakage Under Train Loads and Its Effect on Mechanical Behaviour of Railway Track

Xu Zhang et al.

PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON DISCRETE ELEMENT METHODS (2017)

添加到收藏夹

Article Statistics & Probability

The Target Parameter of Adjusted R-Squared in Fixed-Design Experiments

Hillel Bar-Gera

AMERICAN STATISTICIAN (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Numerical modelling of granular materials with spherical discrete particles and the bounded rolling friction model. Application to railway ballast

Joaquin Irazabal et al.

COMPUTERS AND GEOTECHNICS (2017)

添加到收藏夹

Article Engineering, Geological

Numerical modelling of railway ballast at the particle scale

Sharif Ahmed et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2016)

添加到收藏夹

Article Construction & Building Technology

Dynamic characteristics of track-ballast-silty clay with irregular vibration levels generated by high-speed train based on DEM

Zhihua Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Engineering, Chemical

Fundamental investigation of constant stress simple shear test using DEM

Mozhgan Asadzadeh et al.

POWDER TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Civil

Importance of particle shape on stress-strain behaviour of crushed stone-sand mixtures

Janaka J. Kumara et al.

GEOMECHANICS AND ENGINEERING (2016)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

The Double Hierarchy Method. A parallel 3D contact method for the interaction of spherical particles with rigid FE boundaries using the DEM

Miquel Santasusana et al.

COMPUTATIONAL PARTICLE MECHANICS (2016)

添加到收藏夹

Proceedings Paper Engineering, Geological

Quantifying Degradation of Railway Ballast using Numerical Simulations of Micro-Deval Test and In-situ Conditions

Ivan Deiros et al.

ADVANCES IN TRANSPORTATION GEOTECHNICS III (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Discrete element modelling of lateral displacement of a granular assembly under cyclic loading

Cheng Chen et al.

COMPUTERS AND GEOTECHNICS (2015)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Impact of micromechanical parameters on wire sawing: a 3D discrete element analysis

B. Nassauer et al.

COMPUTATIONAL PARTICLE MECHANICS (2015)

添加到收藏夹

Article Engineering, Chemical

Simulation of railway ballast using crushable polyhedral particles

Jan Elias

POWDER TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Geological

Behavior of Fresh and Fouled Railway Ballast Subjected to Direct Shear Testing: Discrete Element Simulation

Buddhima Indraratna et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2014)

添加到收藏夹

Article Engineering, Civil

Evaluation of Aggregate Size and Shape by Means of Segmentation Techniques and Aggregate Image Processing Algorithms

Maziar Moaveni et al.

TRANSPORTATION RESEARCH RECORD (2013)

添加到收藏夹

Article Construction & Building Technology

Discrete Element Modeling for fouled railroad ballast

Hai Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

添加到收藏夹

Article Engineering, Chemical

Assessment of rolling resistance models in discrete element simulations

Jun Ai et al.

POWDER TECHNOLOGY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

An efficient algorithm for granular dynamics simulations with complex-shaped objects

Fernando Alonso-Marroquin et al.

GRANULAR MATTER (2009)

添加到收藏夹

Article Engineering, Mechanical

Fundamentals of vehicle-track coupled dynamics

Wanming Zhai et al.

VEHICLE SYSTEM DYNAMICS (2009)

添加到收藏夹

Article Engineering, Geological

DISCRETE ELEMENT ANALYSIS OF THE RESPONSE OF GRANULAR MATERIALS DURING CYCLIC LOADING

Catherine O'Sullivan et al.

SOILS AND FOUNDATIONS (2008)

添加到收藏夹

Article Engineering, Geological

DEM analysis of angular ballast breakage under cyclic loading

Z. Hossain et al.

GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

The importance of modelling ballast particle shape in the discrete element method

M. Lu et al.

GRANULAR MATTER (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach

G Saussine et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A novel discrete model for granular material incorporating rolling resistance

MJ Jiang et al.

COMPUTERS AND GEOTECHNICS (2005)

添加到收藏夹

Article Engineering, Civil

Dynamic effects of vehicles on tracks in the case of raising train speeds

WM Zhai et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.