☆ 4.6 Article

Sludge Reduction and Surface Investigation in Electrochemical Machining by Complexing and Reducing Agents

PROCESSES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Deionized Water Electrochemical Machining Hybridized with Alumina Powder Polishing for Microcavity of M-333 Mold Steel

Albert Wen-Jeng Hsue et al.

Summary: This study proposes an electrochemical machining (ECM) process using deionized water (DI-water) and alumina powder for microcavity fabrication, and combines ECM with polishing to achieve better surface profile for deeper cavities. The results demonstrate the feasibility of the proposed method in achieving excellent surface roughness and accurate profile with appropriate process parameters.

PROCESSES (2022)

添加到收藏夹

Article Environmental Sciences

Reduction of hexavalent chromium using L-ascorbic acid in rotating reactors

S. Karmakar et al.

Summary: This study compared the reduction of hexavalent chromium by L-ascorbic acid in three novel rotating reactors, finding that the rotating spiral reactor achieved the maximum percentage reduction. Experimental results indicated that rotating reactors could significantly reduce the volume of conventional reactors.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Oxide Formation during Transpassive Material Removal of Martensitic 42CrMo4 Steel by Electrochemical Machining

Daniela Zander et al.

Summary: The efficiency of material removal by electrochemical machining is determined by various factors including material composition, chemical surface condition, electrolyte, machining parameters, and current density distribution. The mechanisms of anodic metal dissolution and oxide formation are not fully understood for steels like 42CrMo4. Results from ECM processing of 42CrMo4 in sodium nitrate solution showed the formation of a Fe3-xO4 mixed oxide and changes in the oxidation state of iron, chromium, and molybdenum. Electrically controlled anodic dissolution and oxide formation were found to be key processes during ECM of 42CrMo4.

MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Sustainable Electrochemical Micromachining Using Atomized Electrolyte Flushing

Divyansh Singh Patel et al.

Summary: The study introduces a novel atomized electrolyte flushing technique to enhance mass transport in electrochemical micromachining (ECMM). Experimental results show that the atomized electrolyte flushing reduces electrolyte consumption significantly and improves machining performance.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Engineering, Chemical

An Investigation of Ultrasonic-Assisted Electrochemical Machining of Micro-Hole Array

Zhe-Yong Shen et al.

Summary: This paper discusses the use of an ultrasonic vibration-integrated array electrode for micro-hole drilling in 301 stainless steel. Experimental results show that with the optimal parameter combination, such drilling can achieve a minimum average diagonal length and a smaller amount of variation in diagonal length, improving the inlet and outlet taper angle of micro-holes.

PROCESSES (2021)

添加到收藏夹

Article Electrochemistry

Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemical Polishing

Ke Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Electrochemistry

Electrochemical Superfinishing of Cast and ALM 316L Stainless Steels in Deep Eutectic Solvents: Surface Microroughness Evolution and Corrosion Resistance

C. Rotty et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Electrochemistry

Electrochemical Milling of TB6 Titanium Alloy in NaNO3 Solution

Yang Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Electrochemistry

Localization of the Anodic Dissolution of Inconel 718 by Using an Electrodeposited Nickel Film

Dengyong Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Design of ECM tool electrode with controlled conductive area ratio for holes with complex internal features

Dahai Mi et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Electrochemistry

Electrochemical Machining-mechanisms of anodic dissolution

M. M. Lohrengel et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Automation & Control Systems

Electrochemical mechanical polishing technology: recent developments and future research and industrial needs

Abd El Khalick Mohammad et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Review Electrochemistry

Electrochemical methods for ascorbic acid determination

Aurelia Magdalena Pisoschi et al.

ELECTROCHIMICA ACTA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical Machining of cemented carbides

N. Schubert et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Synthesis and characterization of iron oxide nanoparticles by solvothermal method

Deepti Mishra et al.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2014)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Characterization of Surface Finish of Electropolished Stainless Steel AISI 316L with Varying Electrolyte Concentrations

P. J. Nunez et al.

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) (2013)

添加到收藏夹

Article Electrochemistry

Study of the effects of heat removal on the copying accuracy of the electrochemical machining process

D. Deconinck et al.

ELECTROCHIMICA ACTA (2011)

添加到收藏夹

Review Environmental Sciences

Removal of heavy metal ions from wastewaters: A review

Fenglian Fu et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2011)

添加到收藏夹

Article Electrochemistry

Electrochemical dissolution of hard metal alloys

B. Walther et al.

ELECTROCHIMICA ACTA (2007)

添加到收藏夹

Article Chemistry, Physical

Mossbauer, FT-IR and FE SEM investigation of iron oxides precipitated from FeSO4 solutions

Marijan Gotic et al.

JOURNAL OF MOLECULAR STRUCTURE (2007)

添加到收藏夹

Review Engineering, Environmental

Physico-chemical treatment techniques for wastewater laden with heavy metals

TA Kurniawan et al.

CHEMICAL ENGINEERING JOURNAL (2006)

添加到收藏夹

Article Chemistry, Physical

Photochemistry of the Fe(III)-EDTA complexes - A mechanistic study

P Kocot et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2006)

添加到收藏夹

Article Electrochemistry

Microscopic investigations of electrochemical machining of Fe in NaNO3

MM Lohrengel et al.

ELECTROCHIMICA ACTA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.