☆ 4.7 Article

Development of 3D-Printed Bicompartmental Devices by Dual-Nozzle Fused Deposition Modeling (FDM) for Colon-Specific Drug Delivery

PHARMACEUTICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Pharmacology & Pharmacy

Development of multifunctional drug delivery system via hot-melt extrusion paired with fused deposition modeling 3D printing techniques

Ziru Zhang et al.

Summary: The model of core-shell structured tablets is gaining interest in controlled-release and combinational drug delivery. This study used hot-melt extrusion and fused deposition modeling 3D printing techniques to develop a multifunctional core-shell model for controlled drug delivery. Different dosage forms could be successfully loaded into the produced shells. The designed model showed modified-release character and could improve formulation development for patient-centered medication.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Production of Bi-Compartmental Tablets by FDM 3D Printing for the Withdrawal of Diazepam

Joana Macedo et al.

Summary: The present study aimed to prepare tablets with gradual doses of DZP using the dual-nozzle system of FDM 3D printers for the treatment of anxiety or acute alcohol withdrawal. Placebo and DZP-loaded filaments were prepared by hot-melt extrusion and used for printing bi-compartmental tablets. The printed tablets had good adhesion between layers and achieved the desired drug contents within the acceptance criteria.

PHARMACEUTICS (2023)

添加到收藏夹

Review Polymer Science

3D printing technology: A new approach for the fabrication of personalized and customized pharmaceuticals

Muneeb Ullah et al.

Summary: 3DP is a computer-aided designing technology that creates 3D articles layer-by-layer, allowing personalized and customized pharmaceuticals to be manufactured. This has the potential to revolutionize medication manufacturing and administration.

EUROPEAN POLYMER JOURNAL (2023)

添加到收藏夹

Review Biochemistry & Molecular Biology

Recent advances in the treatment of IBD: Targets, mechanisms and related therapies

Juan Liu et al.

Summary: Inflammatory bowel disease (IBD) is effectively treated with multiple options, and new therapies are actively being explored to provide more choices. Biologic agents and small molecule drugs for ulcerative colitis and Crohn's disease have evolved to have fewer side effects and more accurate targeting. Novel inhibitors targeting cytokines, integrins, cytokine signaling pathways, and cell signaling receptors have become preferred treatments for many IBD patients. Conventional therapies continue to show therapeutic efficacy, particularly when combined with drug therapy.

CYTOKINE & GROWTH FACTOR REVIEWS (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabrication of timed-release indomethacin core-shell tablets for chronotherapeutic drug delivery using dual nozzle fused deposition modeling (FDM) 3D printing

Sooyeon Chung et al.

Summary: This study developed timed-release indomethacin tablets for the treatment of early morning stiffness in rheumatoid arthritis, using two-nozzle fused deposition modeling (FDM) 3D printing. The tablets consisted of a drug-containing core and release-regulating shell, with different shell thicknesses. The tablets showed a delay of 4-8 hours depending on the shell thicknesses and released most of the drugs in 3 hours. The study explored the suitability of using FDM 3D printing with Bowden extrusion for producing personalized chronotherapeutic core-shell tablets.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution

Joao M. C. de Assis et al.

Summary: The FDA-approved anthelmintic, flubendazole, has potential to be used in the treatment of cancer and dry macular degeneration. However, its poor water solubility limits its use. In this study, the researchers evaluated the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone using hot-melt extrusion. The results showed that hot-melt extrusion can be a viable option to obtain stable amorphous dispersions of flubendazole:copovidone, and the adjuvants had a notable influence on the dissolution rate.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

QbD guided development of immediate release FDM-3D printed tablets with customizable API doses

Andrea Gabriela Crisan et al.

Summary: The aim of this study was to develop a flexible 3D printed immediate release tablet using fused deposition modeling (FDM), which allows for adjusting the dose of the active pharmaceutical ingredient (API) by scaling the size of the dosage form. Polyvinyl alcohol-based filaments with elevated API content were prepared and their printability was evaluated. Quality by Design (QbD) approach and Design of Experiments (DoE) were employed for the tablet fabrication step. The effects of tablet design, size, and layer height settings on drug release and API content were investigated. The honeycomb configuration was found to be suitable for preparing customizable API doses in immediate release dosage forms. A predictive model was developed to optimize the printing variables.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printing of pharmaceutical oral solid dosage forms by fused deposition: The enhancement of printability using plasticised HPMCAS

Sinmisola Oladeji et al.

Summary: This study aims to prepare filaments for FDM-3DP using hot-melt extrusion (HME) and evaluate the effect of HME-filament composition on printability. It shows that changing the formulation and adding talc can improve the mechanical properties of the filaments. The research also successfully printed drug-loaded and placebo formulations, providing tailored drug release profiles based on variation of internal geometry.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of controlled release oral dosages by density gradient modification via three-dimensional (3D) printing and hot-melt extrusion (HME) technology

Zhiqing Hu et al.

Summary: The study aims to explore the impact of utilizing 3D printing to manufacture tablets with different densities and designs, combined with HME technology to prepare amorphous solid dispersions (ASDs) to improve drug dissolution and bioavailability. The experimental results confirm the influence of filling density on drug release kinetics.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Assessment of the Extrusion Process and Printability of Suspension-Type Drug-Loaded Affinisol™ Filaments for 3D Printing

Gloria Mora-Castano et al.

Summary: Three-dimensional printing technology can design new drug delivery systems for personalized medicine. This study evaluated the extrusion process and appearance of filaments made from a hydrophilic polymer and a non-molten model drug. The study found a critical point in the extrusion process at a drug load of 30-40%.

PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabrication of bilayer tablets using hot melt extrusion-based dual-nozzle fused deposition modeling 3D printing

Peilun Zhang et al.

Summary: The objective of this study was to fabricate bilayer tablets using HME-based dual-nozzle FDM 3D printing techniques. Different formulations and structures were used to evaluate the mechanical properties and printing quality of the filaments. The study revealed the successful fabrication of bilayer tablets and identified suitable materials for printing.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D printing hybrid materials using fused deposition modelling for solid oral dosage forms

Liam Krueger et al.

Summary: 3D printing is rapidly expanding in the pharmaceutical and healthcare fields, allowing for precise control of dosage and multiple aesthetic features of dosage forms. The development of hybrid materials is gaining momentum, particularly in the context of FDM technology.

JOURNAL OF CONTROLLED RELEASE (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

3D Printed Fractal-like Structures with High Percentage of Drug for Zero-Order Colonic Release

Vicente Linares et al.

Summary: This study aimed to design a high drug loaded 3D printed system for zero-order colonic drug release. Different batches of filaments were developed and a fractal-like structure was printed using the selected filaments. The results showed that the structure could provide a five-hour period of constant drug release in the colonic region.

PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment

Atabak Ghanizadeh Tabriz et al.

Summary: This study utilized Fusion Deposition Modelling (FDM) to design and fabricate a bilayer tablet for tuberculosis treatment, with one drug releasing in the stomach and another in the upper intestine. The bilayer tablet preparation involved hot melt extrusion and 3D printing, optimizing drug release and ensuring consistent drug-containing layers. The study demonstrated the potential application of FDM technology in developing personalized clinical treatment options for oral fixed-dose combinations.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Chemistry, Physical

Morphology of Models Manufactured by SLM Technology and the Ti6Al4V Titanium Alloy Designed for Medical Applications

Damian Gogolewski et al.

Summary: This paper presents the results of an experimental study on the use of SLM additive technology to produce structures with specific surface morphological features. Qualitative and quantitative tests were conducted on 3D printed samples from titanium-based material, providing insights into their potential use in medical applications and design recommendations for 3D printers. The study also evaluates the impact of printing direction on surface structures, contributing to the development of 3D printing standardization.

MATERIALS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

D-Sorbitol Physical Properties Effects on Filaments Used by 3D Printing Process for Personalized Medicine

Stephane Roulon et al.

Summary: The Polyethylene oxide (PEO) filaments produced by hot melt extrusion (HME) are used for FFF 3D printing to create oral forms. Controlling filament mass homogeneity and diameter variability is crucial for producing personalized oral forms. The particle's size distribution of filler excipients can impact filament diameter variability and ultimately affect the mass uniformity of oral forms produced by FFF.

MOLECULES (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Production of Reproducible Filament Batches for the Fabrication of 3D Printed Oral Forms

Stephane Roulon et al.

Summary: This research aimed to identify important parameters for 3D printing of oral formulations and evaluate the physical form of drugs and mechanical properties of filaments through investigating different formulation storage conditions.

PHARMACEUTICS (2021)

添加到收藏夹

Article Chemistry, Medicinal

Polyvinyl Alcohol-Based 3D Printed Tablets: Novel Insight into the Influence of Polymer Particle Size on Filament Preparation and Drug Release Performance

Andrea Gabriela Crisan et al.

Summary: This study focused on the influence of polyvinyl alcohol (PVA) particle size on drug-loaded filament preparation and drug release in 3D printed dosage forms. By enhancing filament printability and exploring a channeled tablet model, new perspectives on material considerations for PVA-based solid dosage forms were revealed.

PHARMACEUTICALS (2021)

添加到收藏夹

Article Engineering, Chemical

Nanostructured micronized solid dispersion of crystalline-amorphous metronidazole embedded in amorphous polymer matrix prepared by nano spray drying

Mirella Miranko et al.

Summary: In this study, metronidazole drug was successfully encapsulated using nano spray drying technology. The influence of process parameters and formulation variables on product morphology, production yield, and entrapment efficiency was investigated. The drug-polymer composites formed showed a crystalline-amorphous nanostructured micronized solid dispersion.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients

Christos Gioumouxouzis et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing

Pengchong Xu et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Polymer Science

Novel On-Demand 3-Dimensional (3-D) Printed Tablets Using Fill Density as an Effective Release-Controlling Tool

Rishi Thakkar et al.

POLYMERS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics

Gabriela G. Pereira et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Exploring tablet design options for tailoring drug release and dose via fused deposition modeling (FDM) 3D printing

Guluzar Gorkem Buyukgoz et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures

Beatriz C. Pereira et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen

Siddhant Palekar et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Poly(vinyl alcohol) 3D printed tablets: The effect of polymer particle size on drug loading and process efficiency

Marilena Saviano et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments

Jiaxiang Zhang et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

A review on 5-aminosalicylic acid colon-targeted oral drug delivery systems

Hossein Shahdadi Sardo et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery

Christos I. Gioumouxouzis et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of a dual extrusion printing technique for an acid- and thermo-labile drug

Wiebke Kempin et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

From 'fixed dose combinations' to 'a dynamic dose combiner': 3D printed bi-layer antihypertensive tablets

Muzna Sadia et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Defined drug release from 3D-printed composite tablets consisting of drugloaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler

Tatsuaki Tagami et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications

Nicolaos Scoutaris et al.

PHARMACEUTICAL RESEARCH (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy

Tochukwu C. Okwuosa et al.

PHARMACEUTICAL RESEARCH (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging

Daniel Markl et al.

PHARMACEUTICAL RESEARCH (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets

Jiaxiang Zhang et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing

Qijun Li et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D printed multi-compartment capsular devices for two-pulse oral drug delivery

A. Maroni et al.

JOURNAL OF CONTROLLED RELEASE (2017)

添加到收藏夹

Article Chemistry, Medicinal

Effect of hydrophilic additives on the dissolution and pharmacokinetic properties of itraconazole-enteric polymer hot-melt extruded amorphous solid dispersions

Bo Lang et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing

Justyna Skowyra et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets

Alvaro Goyanes et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)

添加到收藏夹

Article Pharmacology & Pharmacy

Hot-melt extrusion of polyvinyl alcohol for oral immediate release applications

W. De Jaeghere et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)

添加到收藏夹

Article Medicine, Research & Experimental

3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics

Alvaro Goyanes et al.

MOLECULAR PHARMACEUTICS (2015)

添加到收藏夹

Article Gastroenterology & Hepatology

Optimizing clinical use of mesalazine (5-aminosalicylic acid) in inflammatory bowel disease

Chadwick Williams et al.

Therapeutic Advances in Gastroenterology (2011)

添加到收藏夹

Article Pharmacology & Pharmacy

Cogrinding as a Tool to Produce Sustained Release Behavior for Theophylline Particles Containing Magnesium Stearate

Ali Nokhodchi et al.

AAPS PHARMSCITECH (2009)

添加到收藏夹

Article Pharmacology & Pharmacy

Properties of hot-melt extruded tablet formulations for the colonic delivery of 5-aminosalicylic acid

LD Bruce et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2005)

添加到收藏夹

Review Pharmacology & Pharmacy

Modeling and comparison of dissolution profiles

P Costa et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.