☆ 4.7 Article

Factors That Influence Sustained Release from Hot-Melt Extrudates

PHARMACEUTICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Development of hot-melt extruded drug/polymer matrices for sustained delivery of meloxicam

Yun-Chu Chen et al.

Summary: In this study, a polymeric implant that can sustain release meloxicam was developed for effective resolution of regional subacute inflammation and prevention of biofouling formation. The choice of polymer platform is crucial to continuous release of meloxicam, and the drug release rate can be controlled by the amount of drug loaded in the polymer matrices.

JOURNAL OF CONTROLLED RELEASE (2022)

添加到收藏夹

Article Polymer Science

Formulation and Evaluation of Fenbendazole Extended-Release Extrudes Processed by Hot-Melt Extrusion

Gilberto S. N. Bezerra et al.

Summary: This study aimed to demonstrate the feasibility of using hot-melt extrusion to develop extended-release formulations of Fenbendazole dispersed in PEO/PCL blend-based matrices. The results showed that the drug converted to its amorphous state after thermal treatment, and the release rate of the drug could be controlled by adjusting the content of PCL in the blend.

POLYMERS (2022)

添加到收藏夹

Article Instruments & Instrumentation

Sustained release dosage form of noscapine HCl using hot melt extrusion (HME) technique: formulation and pharmacokinetics

Arvind Bagde et al.

Summary: The study successfully developed a sustained release formulation of noscapine HCl using Eudragit RLPO, citric acid, and hot melt extrusion technique to achieve pH-independent drug release. The formulation showed high drug recovery, improved bioavailability, and sustained plasma concentration compared to the solution form. The findings suggest that hot melt extrusion can enhance the bioavailability and solubility of weakly basic drugs like noscapine HCl.

DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Overdose and Alcohol Sensitive Immediate Release System (OASIS) for Deterring Accidental Overdose or Abuse of Drugs

Manali Patki et al.

Summary: Death from accidental or intentional overdose of sleeping tablets has risen significantly in the USA. The article presents a novel technology using specific drug design to prevent abuse of sleeping tablets.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Chemistry, Medicinal

Preparation, characterization and in-Vitro/in-Vivo evaluation of meloxicam extruded pellets with enhanced bioavailability and stability

Maha F. Emam et al.

Summary: The present study successfully enhanced the oral absorption of Meloxicam (MX) for rapid therapeutic action by using the hot-melt-extrusion technique. The novel MX pellets showed improved stability, dissolution performance, and faster absorption rate compared to the innovator product Mobic(R). The Soluplus-based MX pellets achieved a T-max value of 45 minutes, which was 6 times faster than Mobic(R).

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Coupling hot melt extrusion and fused deposition modeling: Critical properties for successful performance q

Suresh Bandari et al.

Summary: Interest in 3D printing for pharmaceutical applications has been on the rise, with HME-based FDM 3D printing being extensively investigated for patient-focused dosage. By investigating crucial pharmaceutical polymers, formulation and process parameters, HME-coupled FDM 3D printing can be established to pave the way for developing continuous drug delivery systems for personalized therapy.

ADVANCED DRUG DELIVERY REVIEWS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Role of release modifiers to modulate drug release from fused deposition modelling (FDM) 3D printed tablets

Kejing Shi et al.

Summary: This study investigated the use of various release modifiers to control drug release from 3D printed sustained release tablets, showcasing the ability to simply control drug release over 24 hours by changing the type of release modifiers. By loading ibuprofen and release modifiers into an ethyl cellulose matrix, 3D printed tablets with zero-order release characteristics were achieved.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Hot-melt extrusion: Highlighting recent advances in pharmaceutical applications

Srushti Tambe et al.

Summary: Hot-melt extrusion (HME) technology is widely used in the pharmaceutical industry for its unit operation, cost-effectiveness, solvent-free nature, and continuous manufacturing capabilities. By studying formulation and process parameters, a variety of different dosage forms can be developed. In-depth pre-formulation research is crucial for the smooth and continuous functioning of the HME process to achieve the desired product.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

PEO hot melt extrudates for controlled drug delivery: Importance of the type of drug and loading

O. Cantin et al.

Summary: A study prepared matrix tablets with different drug loadings and PEO molecular weights via hot melt extrusion. The release rates of metoprolol tartrate increased monotonically with initial drug loading, while the release rates of theophylline and ibuprofen were influenced by drug solubility effects and varied with different PEO molecular weights.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Development and Characterization of Sustained-Released Donepezil Hydrochloride Solid Dispersions Using Hot Melt Extrusion Technology

Abdullah Alshetaili et al.

Summary: This study aimed to develop a sustained release formulation of donepezil hydrochloride (DH) using the hot-melt extruded solid dispersion technique. By rational screening of hydrophobic carriers, the release profile of DH was successfully modified, and a preferable release pattern was obtained by optimizing the ratio of carriers and pore-forming agents as well as the extrusion temperature profile.

PHARMACEUTICS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

3D printing in personalized drug delivery: An overview of hot-melt extrusion-based fused deposition modeling

Nagireddy Dumpa et al.

Summary: Advancements in pharmaceutical technologies have led to the personalization of therapies over the last decade, with 3D printing emerging as a technique for manufacturing complex and customized dosage forms. Among the various 3D printing techniques, fused deposition modeling (FDM) is versatile and cost-effective, particularly in conjunction with hot-melt extrusion (HME) for filament preparation.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Flurbiprofen: A Study of the Behavior of the Scalemate by Chromatography, Sublimation, and NMR

Magdalena Kwiatkowska et al.

Summary: Flurbiprofen, a member of the nonsteroidal anti-inflammatory drug family, is currently available on the pharmaceutical market as a racemate. Various forms of chromatography and nuclear magnetic resonance testing revealed that its intermolecular associations are solvent dependent, influencing the rationalization and prediction of chromatographic outcomes. This study also explored the importance of scalemic samples of flurbiprofen and the implications of SDEvC and SDEvS for enantioenriched drug preparation and storage.

SYMMETRY-BASEL (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Hot-Melt Extrusion: a Roadmap for Product Development

Marta F. Simoes et al.

Summary: Hot-melt extrusion technology is widely used in pharmaceutical formulations to prepare solid dispersions for enhancing drug solubility. By applying the Quality by Design philosophy and process analytical technologies, the quality and process of hot-melt extrusion can be effectively monitored and controlled.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Recent studies on the processes and formulation impacts in the development of solid dispersions by hot-melt extrusion

Phuong H. L. Tran et al.

Summary: Hot-melt extrusion is a promising method for the preparation of drug delivery systems on an industrial scale, but there is still a lack of research on its recent progress and influencing factors. This review discusses the effects of hot-melt extrusion on various factors in solid dispersion systems and describes the use of molecular interactions to improve drug stability.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Eudragit(R): A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics

Juliana dos Santos et al.

Summary: Eudragit polymers, widely used in pharmaceuticals, offer versatility in chemical composition and have been utilized in various drug delivery systems. Eudragit E is commonly used for immediate release systems, while Eudragit RS and Eudragit L100-55 are preferred for controlled and delayed release systems, respectively. Their use in processes like HME and 3D printing showcases the numerous possibilities for innovative drug release systems.

PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Dissolution behavior of various drugs in different FaSSIF versions

Lukas Klumpp et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Article Chemistry, Medicinal

Evaluation of Differences in Dosage Form Performance of Generics Using BCS-Based Biowaiver Specifications and Biopharmaceutical Modeling-Case Examples Amoxicillin and Doxycycline

Martin A. Hofsaess et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Probing the Molecular-Level Interactions in an Active Pharmaceutical Ingredient (API)-Polymer Dispersion and the Resulting Impact on Drug Product Formulation

Fengyuan Yang et al.

PHARMACEUTICAL RESEARCH (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Eutectic mixtures as an approach to enhance solubility, dissolution rate and oral bioavailability of poorly water-soluble drugs

Giovana Carolina Bazzo et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabrication of Taste-Masked Donut-Shaped TabletsViaFused Filament Fabrication 3D Printing Paired with Hot-Melt Extrusion Techniques

Honghe Wang et al.

AAPS PHARMSCITECH (2020)

添加到收藏夹

Review Materials Science, Biomaterials

Phenomenology of the Initial Burst Release of Drugs from PLGA Microparticles

Jin Yoo et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics

Gabriela G. Pereira et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

3D-Printed Isoniazid Tablets for the Treatment and Prevention of TuberculosisPersonalized Dosing and Drug Release

Heidi Oblom et al.

AAPS PHARMSCITECH (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction

Carolin Korte et al.

AAPS PHARMSCITECH (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Chronotherapeutic Drug Delivery of Ketoprofen and Ibuprofen for Improved Treatment of Early Morning Stiffness in Arthritis Using Hot-Melt Extrusion Technology

Nagi Reddy Dumpa et al.

AAPS PHARMSCITECH (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Melt extrusion process for adjusting drug release of poorly water soluble drug felodipine using different polymer matrices

Eirini Palazi et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery

Christos I. Gioumouxouzis et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Prolonged drug release properties for orodispersible films by combining hot-melt extrusion and solvent casting methods

Isabell Speer et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

A comparison of two biorelevant in vitro drug release methods for nanotherapeutics based on advanced physiologically-based pharmacokinetic modelling

Fabian Jung et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)

添加到收藏夹

Article Chemistry, Medicinal

Selection of Solid-State Plasticizers as Processing Aids for Hot-Melt Extrusion

Dipen Desai et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants

Wiebke Kempin et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

Process analytical quality control of tailored drug release formulation prepared via hot-melt extrusion technology

Jun-Bom Park et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling

Alice Melocchi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of sustained and dual drug release co-extrusion formulations for individual dosing

Eva Julia Laukamp et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)

添加到收藏夹

Article Pharmacology & Pharmacy

Evaluation of hot-melt extrusion technique in the preparation of HPC matrices for prolonged release

Giulia Loreti et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2014)

添加到收藏夹

Article Pharmacology & Pharmacy

Effect of plasticiser type on the hot melt extrusion of venlafaxine hydrochloride

Melina Bounartzi et al.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2014)

添加到收藏夹

Article Medicine, Research & Experimental

Molecular Mobility of Amorphous S-Flurbiprofen: A Dielectric Relaxation Spectroscopy Approach

A. C. Rodrigues et al.

MOLECULAR PHARMACEUTICS (2014)

添加到收藏夹

Article Pharmacology & Pharmacy

Formulation and Evaluation of Sustained Release Extrudes Prepared via Novel Hot Melt Extrusion Technique

Ravindra Tiwari et al.

JOURNAL OF PHARMACEUTICAL INNOVATION (2014)

添加到收藏夹

Article Pharmacology & Pharmacy

Enhancing bioavailability through thermal processing

Justin M. Keen et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)

添加到收藏夹

Review Pharmacology & Pharmacy

Melt extrusion with poorly soluble drugs

Sejal Shah et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)

添加到收藏夹

Article Chemistry, Medicinal

Enhanced Solubility and Bioavailability of Flurbiprofen by Cycloamylose

Hyung Hee Baek et al.

ARCHIVES OF PHARMACAL RESEARCH (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Vivo Bioequivalence and In Vitro Similarity Factor (f2) for Dissolution Profile Comparisons of Extended Release Formulations: How and When Do They Match?

John Z. Duan et al.

PHARMACEUTICAL RESEARCH (2011)

添加到收藏夹

Article Pharmacology & Pharmacy

Mathematical modeling of drug release from Eudragit RS-based delivery systems

B. Glaessl et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Medicine, Research & Experimental

Predicting the Formation and Stability of Amorphous Small Molecule Binary Mixtures from Computationally Determined Flory-Huggins Interaction Parameter and Phase Diagram

Katja Pajula et al.

MOLECULAR PHARMACEUTICS (2010)

添加到收藏夹

Review Pharmacology & Pharmacy

A century of dissolution research: From Noyes and Whitney to the Biopharmaceutics Classification System

Aristides Dokoumetzidis et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)

添加到收藏夹

Review Microbiology

Clinical aspects and pathophysiology of inflammatory bowel disease

BA Hendrickson et al.

CLINICAL MICROBIOLOGY REVIEWS (2002)

添加到收藏夹

Review Pharmacology & Pharmacy

Improving drug solubility for oral delivery using solid dispersions

C Leuner et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.