4.5 Article

Nanofluids effect on the overall transfer coefficients change mechanism analysis

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-and-Tube Heat Exchanger

Mehrdad Zolfalizadeh et al.

Summary: This study investigated the use of graphene nanoplate (GNP)/water nanofluids in a new shell-and-tube heat exchanger (STHE) and examined their impact on thermal efficiency, pressure drop, and heat transfer characteristics. The results showed that the addition of 0.06 wt.% GNP in the nanofluid improved the heat exchanger efficiency and heat transfer rate, but also increased pressure drops.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2023)

Article Engineering, Mechanical

Analytical Solution to Time-Periodic Electro-Osmotic Flow of Generalized Maxwell Fluids in Parallel Plate Microchannel With Slip-Dependent Zeta Potential

Ashim Jyoti Nath et al.

Summary: This technical brief reports on the flow characteristics of a time-periodic electrokinetically mediated flow of a generalized Maxwell fluid through a straight planar microchannel, taking into account the interfacial slip effect on surface potential. Critical values of Reynolds number are obtained at different relaxation times, leading to flow reversal initialization in the core region of the microchannel. Thinner electrical double layer results in higher velocity amplitude, particularly for apparent zeta potential. Additionally, dissimilar zeta potentials result in an asymmetrical amplitude of velocity near and away from the walls of the microchannel at higher Reynolds numbers. The volumetric flow rate oscillates with the relaxation time for both apparent and true zeta potential.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2023)

Article Energy & Fuels

The stability and thermophysical properties of Al2O3-graphene oxide hybrid nanofluids for solar energy applications: Application of robust autoregressive modern machine learning technique

Praveen Kumar Kanti et al.

Summary: This paper investigates the dispersion stability and thermophysical characteristics of water-based alumina (Al2O3), graphene oxide (GO), and their hybrid nanofluids (HNF). The properties of the nanofluids were analyzed, including thermal conductivity (TC) and viscosity (VST), as well as the effect of different surfactants on stability. The study found that GO had higher TC enhancement compared to Al2O3 NF, and the addition of GO increased the TC and VST of HNF. Regression equations were developed to predict the VST and TC of HNFs. Machine learning approaches were also used to model-predict the thermophysical properties of HNFs with high prognostic efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

Article Mathematics, Interdisciplinary Applications

System-dependent behaviors of nanofluids for heat transfer: a particle-resolved computational study

Mayssaa Jbeili et al.

Summary: Nanofluids, suspensions of metal or oxide nanoparticles in a fluid, have been extensively studied for their potential in enhancing heat transfer. In this article, a particle-resolved numerical model was presented to simulate nanofluids, considering the explicit interaction between nanoparticles and ambient fluid flows. Simulations were conducted under different conditions, and it was found that adding particles can improve conductive heat transfer but reduce convection contribution, leading to potential deterioration of the overall thermal performance. The model can be extended for future studies on nanofluids.

COMPUTATIONAL PARTICLE MECHANICS (2023)

Article Chemistry, Physical

Charge and zeta-potential distribution in starch modified with octenyl succinic anhydride (OSA) determined using electrical asymmetrical flow field-flow fractionation (EAF4)

Catalina Fuentes et al.

Summary: Starch modified with octenyl succinic anhydride (OSA) is useful for its emulsifying capacity and anionic properties. The functionality of the modified starch depends on the amount and distribution of OSA grafted to the starch backbone. Electrical asymmetrical flow field-flow fractionation (EAF4) can determine the charge properties and size/molar mass distribution of starch.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

Article Chemistry, Applied

The effect of pH on stability and thermal performance of graphene oxide and copper oxide hybrid nanofluids for heat transfer applications: Application of novel machine learning technique

Praveen Kumar Kanti et al.

Summary: This study investigated the effects of pH on the stability and thermal properties of copper oxide (CuO), graphene oxide (GO), and their hybrid nanofluid (HNF) at different mixing ratios. The CuO and GO nanoparticles (NPs) were synthesized using sol-gel and Hummer's method and characterized using various techniques. The effects of two different surfactants on the stability of the nanofluid (NF) at different pH values were analyzed. The thermal conductivity (TC) and viscosity (VST) of the NFs were measured at different volume concentrations and temperatures, and the figure of merit (FOM) was determined for the studied HNFs.

JOURNAL OF ENERGY CHEMISTRY (2023)

Article Energy & Fuels

Zeta Potential of Nanosized Particles of Cellulose as a Function of pH

B. M. Anikushin et al.

Summary: This research obtained dispersions of nanodimensional cellulose particles and determined their zeta potential at different pH values. It was found that a type of nanofiber exhibited good sedimentation stability at pH values ranging from 3 to 11, while cellulose nanocrystals showed good sedimentation stability at pH values ranging from 4 to 11.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2022)

Article Thermodynamics

A molecular dynamics study on thermal conductivity enhancement mechanism of nanofluids-Effect of nanoparticle aggregation

Lu Zhou et al.

Summary: The aggregation state of nanoparticles affects the thermal conductivity of nanofluids, with the interaction at the solid-liquid interface and changes in aggregation morphology playing important roles in determining heat transfer efficiency. Nanoparticle aggregates with chain-like structures maximize thermal conductivity due to enhanced interaction between atoms, providing more efficient heat transfer.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Chemistry, Physical

Atomistic insights into heat transfer and flow behaviors of nanofluids in nanochannels

Haiyi Sun et al.

Summary: This study provides atomistic insights into the heat transfer and flow behaviors of nanofluids in nanochannels using molecular dynamics simulation. It is found that nanoparticles in nanofluids can affect temperature development and fluid flow, promoting heat transfer. Nanofluids with higher nanoparticle volume concentration exhibit better convective heat transfer performance.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Thermodynamics

The enhanced heat transfer of diathermic oil-based alumina-doped zinc oxide nanofluids for domestic solar heating systems

Hao Wang et al.

Summary: In this study, a new type of DO-based AZO nanofluids were prepared and showed improved thermal conductivity and reduced viscosity compared to pure DO. The convective heat transfer coefficient of AZO nanofluids increased with temperature, indicating their potential application in domestic solar heating systems.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Article Chemistry, Physical

Stability and thermal conductivity of TiO2/water nanofluids: A comparison of the effects of surfactants and surface modification

Hao Zhang et al.

Summary: In this study, gamma-glycidoxypropyltrimethoxysilane (GPTMS) modified TiO2/water nanofluids were prepared using surface modification technique. The characteristics of the modified nanoparticles were investigated, showing that the grafting efficiency of GPTMS increased with reaction temperature and reactant mass ratio. The stability and thermal conductivity of the prepared nanofluids were investigated, indicating that the GPTMS modified nanofluids exhibited excellent stability and higher thermal conductivity.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Chemistry, Physical

Effects of surface modification and surfactants on stability and thermophysical properties of TiO2/water nanofluids

Hao Zhang et al.

Summary: The study showed that Tetramethylammonium hydroxide and 3-aminpropyltriethoxysilane treatment can enhance the dispersion stability of TiO2/water nanofluids. Increasing nanoparticle concentration leads to higher viscosity of nanofluids, while temperature rise results in decreased viscosity. The thermal conductivity and effective thermal conductivity of nanofluids increase with temperature and nanoparticle concentration.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Nanoscience & Nanotechnology

An experimental analysis of CTAB surfactant on thermo-physical properties and stability of MWCNT/water nanofluids

Neeti Arora et al.

Summary: This paper critically evaluates the thermo-physical properties and stability of MWCNT/water nanofluids, and investigates the effect of CTAB surfactant on the nanofluids. The study finds that the addition of CTAB greatly enhances the stability of the nanofluids and changes their nature from hydrophobic to hydrophilic. Furthermore, the study shows that the thermal conductivity and viscosity of the nanofluids increase with the concentration of the nanofluids, but decrease with increasing temperature.

APPLIED NANOSCIENCE (2022)

Review Thermodynamics

Hybrid nanofluids development and benefits: A comprehensive review

S. Suneetha et al.

Summary: This paper provides a comprehensive review of the importance, preparation, stability, and thermophysical properties of hybrid nanofluids in various engineering fields. The study reveals that hybrid nanofluids have higher thermal conductivity and can achieve the desired heat transfer effect at low particle concentrations. pH control and ultrasound intensity can further improve the performance of hybrid nanofluids.

JOURNAL OF THERMAL ENGINEERING (2022)

Article Materials Science, Multidisciplinary

Mechanism analysis of the influence of nanoparticles on the convective heat transfer coefficient of traditional fluids

Liang Zhang et al.

Summary: With the advancement of science and technology, the heat transfer performance of electronic chips and internal combustion engine pistons is becoming increasingly important. The addition of solid particles to fluids has a positive effect on the heat transfer performance. This paper establishes an experimental system to study the heat transfer performance of SiO2-water nanofluids, and analyzes the microscopic mechanism of enhanced heat transfer. The results show that the convective heat transfer coefficients of nanofluids increase with increasing volume fraction of nanoparticles.

MATERIALS TODAY COMMUNICATIONS (2022)

Review Energy & Fuels

An overview on synthesis procedures of nanoparticles applied to enhanced oil recovery

Mariana Schneider et al.

Summary: Current technologies are unable to completely remove all the oil from reservoirs, leaving a significant amount behind. Nanotechnology has emerged as an important tool in enhancing oil recovery due to the unique characteristics of nanoparticles that can improve efficiency. This study reviews articles published in the past 5 years in this field and highlights the important characteristics of nanoparticles and their synthesis methods in relation to oil recovery efficiency.

PETROLEUM SCIENCE AND TECHNOLOGY (2022)

Article Engineering, Chemical

Experimental determination of thermophysical properties of Indonesian fly-ash nanofluid for heat transfer applications

Praveen Kanti et al.

Summary: The study shows that nanofluids prepared using coal fly ash nanoparticles exhibit high stability, increased thermal conductivity, and viscosity, making them suitable for heat transfer applications.

PARTICULATE SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

Effect of surfactants and pH values on stability of γ-Al2O3 nanofluids

Junyu Ji et al.

Summary: By studying the effect of different surfactant modifications and pH values on the dispersion of γ-Al2O3 nanofluids, the optimal surfactant concentration and pH value were identified, and it was found that CTAB performed best in dispersion at the critical micelle concentration.

CHEMICAL PHYSICS LETTERS (2021)

Review Thermodynamics

Nanofluid research and applications: A review

Junhao Li et al.

Summary: Nanofluids, known for their unique thermal conductivity, have been widely utilized across various fields. Recent studies have shown the emergence of new nanofluids with even higher thermal conductivity. Neural network prediction models are expected to become the primary method for thermal conductivity prediction in the future. Current research is focused on reviewing and evaluating influencing factors, prediction models, and applications of nanofluids.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Energy & Fuels

Experimental study on the effect of different surfactants on the thermophysical properties of graphene filled nanofluids

Yu Qiao et al.

Summary: The study found that nonionic surfactants showed the best performance in terms of static stability, and that graphene-filled nanofluids demonstrated enhanced thermal conductivity, leading to a 27% increase in heat transfer coefficient.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Engineering, Chemical

Effect of surfactant on the rheological behavior and thermophysical properties of hybrid nanofluids

Mingyan Ma et al.

Summary: The study found that increasing the concentration of surfactant can improve the stability and viscosity of hybrid nanofluids. Among the surfactants tested, PVP showed the highest stability and contributed to the highest thermal conductivity enhancement at optimal concentrations.

POWDER TECHNOLOGY (2021)

Article Chemistry, Physical

Mass transfer from nanofluid single drops in low interfacial tension liquid?liquid extraction process

BingQian Li et al.

Summary: The study demonstrated the enhancement of liquid-liquid extraction of n-butanol-succinic acid-water with low interfacial tension by nanofluids prepared using a two-step method. The addition of nanoparticles improved the extraction efficiency, with Al2O3 nanofluids generally outperforming TiO2 nanofluids, achieving up to 90% extraction efficiency and an overall mass transfer coefficient of 130.2 μm·s^-1.

CHEMICAL PHYSICS LETTERS (2021)

Article Energy & Fuels

Viscosity, tribological and physicochemical features of ZnO and MoS2 diesel oil-based nanofluids: An experimental study

Seyed Borhan Mousavi et al.

Summary: The study investigated the effects of temperature and nanoparticle content on the viscosity, tribological properties, and physicochemical features of diesel oil-based nanofluids. ZnO and MoS2 nanoparticles were found to enhance the tribological characteristics of pure diesel oil. The addition of nanoparticles also increased the pumping power.
Article Thermodynamics

Experimental and computational determination of heat transfer, entropy generation and pressure drop under turbulent flow in a tube with fly ash-Cu hybrid nanofluid

Praveen Kumar Kanti et al.

Summary: The study investigated the forced convection heat transfer and flow characteristics of water base fly ash-Cu hybrid nanofluid through a copper tube under a constant heat flux. Experimental results showed that the Nusselt number of HNF increased by up to 57.1% at concentrations of 0.5-2.0%, with pressure drop higher than fly ash nanofluid and water.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Article Thermodynamics

Heat Transfer Performance of Green Bioglycol-Based TiO2-SiO2 Nanofluids

S. N. M. Zainon et al.

Summary: This study demonstrates that TiO2-SiO2 nanofluids prepared in a mixture of water and green bioglycol can significantly enhance heat transfer performance, with a maximum heat transfer enhancement up to 67.81%. Additionally, a slight increase in friction factor for the nanofluids was observed, but within an acceptable range.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Article Multidisciplinary Sciences

Comparison between multi-walled carbon nanotubes and titanium dioxide nanoparticles as additives on performance of turbine meter oil nano lubricant

Hadi Pourpasha et al.

Summary: This study compared the impact of MWCNTs and TiO2 as nano additives on turbine meter oil. The results showed that these nano additives could improve the friction coefficient, wear depth, and viscosity index of the oil. The simulation and experimental data for pressure drop were in good agreement with a minor error.

SCIENTIFIC REPORTS (2021)

Article Chemistry, Multidisciplinary

Surfactants Enhanced Heavy Oil-Solid Separation from Carbonate Asphalt Rocks-Experiment and Molecular Dynamic Simulation

Jinjian Hou et al.

Summary: In this study, surfactants were found to effectively decrease oil/solid interaction force and enhance oil-solid separation. Molecular dynamic simulation results showed that different surfactants had varying dissociation effects on SARA components. This study provides insights on the mechanism of heavy oil-solid separation enhancement by surfactants.

NANOMATERIALS (2021)

Article Thermodynamics

Comparative study on thermal behaviors between micrites and thrombolites using thermogravimetric analysis

Zuozhen Han et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Chemistry, Physical

Long-term colloidal stability of graphene oxide aqueous nanofluids

Jesus Nuncira et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2020)

Article Thermodynamics

Experimental investigation of nano-TiO2/turbine meter oil nanofluid

Hadi Pourpasha et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Review Green & Sustainable Science & Technology

Recent advances in application of nanofluids in heat transfer devices: A critical review

Muhammad Usman Sajid et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Thermodynamics

Experimental investigation of MoS2/diesel oil nanofluid thermophysical and rheological properties

Seyed Borhan Mousavi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Article Chemistry, Multidisciplinary

The zeta potentials of g-C3N4 nanoparticles: Effect of electrolyte, ionic strength, pH, and humic acid

Shunan Dong et al.

JOURNAL OF NANOPARTICLE RESEARCH (2019)

Article Chemistry, Physical

Heat transfer capability of the hybrid nanofluids for heat transfer applications

Gabriela Huminic et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Engineering, Chemical

Synthesis of water-soluble Fe-decorated multi-walled carbon nanotubes: A study on thermo-physical properties of ferromagnetic nanofluid

Mehdi Shanbedi et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)

Article Chemistry, Physical

Heat Transfer Performance of Milk Pasteurization Plate Heat Exchangers Using MWCNT/Water Nanofluid

Z. Taghizadeh Tabari et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2015)

Article Engineering, Chemical

Experimental Investigation of Parameters Affecting Nanofluid Effective Thermal Conductivity

A. Kazemi-Beydokhti et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2014)

Article Thermodynamics

Performance comparison of the plate heat exchanger using different nanofluids

Arun Kumar Tiwari et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

Article Thermodynamics

IDENTIFICATION OF THE KEY VARIABLES ON THERMAL CONDUCTIVITY OF CuO NANOFLUID BY A FRACTIONAL FACTORIAL DESIGN APPROACH

Amin Kazemi-Beydokhti et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2013)

Article Thermodynamics

A comparison of experimental heat transfer characteristics for Al2O3/water and CuO/water nanofluids in square cross-section duct

Taofik H. Nassan et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

Article Thermodynamics

Experimental investigation of oxide nanofluids laminar flow convective heat transfer

SZ Heris et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)