☆ 4.6 Article

Study on the Anisotropy of Triply Periodic Minimal Surface Porous Structures

COATINGS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Compressive behavior of hollow triply periodic minimal surface cellular structures manufactured by selective laser melting

Mingkang Zhang et al.

Summary: This study investigates the compressive behavior of hollow triply periodic minimal surface (HTPMS) cellular structures using selective laser melting (SLM). The research shows that the hollow design can enhance the mechanical properties and energy absorption of the cellular structures, and also reduce stress concentration, leading to improved compressive performance.

RAPID PROTOTYPING JOURNAL (2023)

添加到收藏夹

Article Engineering, Mechanical

Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design

Xiao Guo et al.

Summary: In this study, an improved Schwarz primitive lattice structure was proposed by redefining the original opening diameter with a shape parameter. Experimental results showed that the modified P lattice structure with a small opening diameter had increased Young's modulus, compressive strength, and energy absorption compared to the original P lattice structure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Mechanics

Effective stiffness, strength, buckling and anisotropy of foams based on nine unique triple periodic minimal surfaces

Kapil Krishnan et al.

Summary: This study compares the effective stiffness, strength, buckling, and anisotropic properties of 9 sheet-based triply periodic minimal surface (TPMS) architectures. The TPMS lattices are generated using level set equations and their relative density is varied to study the effective properties. Finite element models are built to study their deformation behavior under different loading conditions. The study shows that the SC lattice outperforms other lattices in terms of strength and stiffness efficiencies, while the I2 - Y** lattice shows the weakest efficiency. The results of this study provide useful insights for employing these lattice structures in various applications.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

添加到收藏夹

Article Chemistry, Physical

The Influence of the Structure Parameters on the Mechanical Properties of Cylindrically Mapped Gyroid TPMS Fabricated by Selective Laser Melting with 316L Stainless Steel Powder

Tomasz Szatkiewicz et al.

Summary: The development of additive manufacturing techniques has enabled the production of porous structures with complex geometry and unique properties. This paper investigates the mechanical properties and energy absorption abilities of TPMS structures fabricated using selective laser melting. The results show a relationship between the deformation mode of the structure and the number and shapes of unit cells.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved light-weighting potential of SS316L triply periodic minimal surface shell lattices by micro laser powder bed fusion

Jin Fu et al.

Summary: This study successfully fabricated low-density triply periodic minimal surface (TPMS) shell lattices with smaller feature size using micro laser powder bed fusion (mu LPBF) technology. The compressive responses and lightweight potential of these TPMS structures were analyzed through quasi-static compression tests and finite element modeling. The results showed that the deformation mechanism changed from localized collapse to homogeneous bulk deformation with increasing relative density. Different types of TPMS structures exhibited varied mechanical properties and lightweight potential.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of cycle number on the compression behavior of nonlinear periodically gradient porous structures produced by laser powder bed fusion

Mingkang Zhang et al.

Summary: This research presents a design method for the NL-TPMS and investigates its compression behavior. Experimental and numerical analyses reveal the influence of porosity cycles on the compression failure mechanism and the anisotropy of mechanical properties in NL-TPMS. The study also highlights the periodic deformation and strain distribution in NL-TPMS.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Parametric design and evaluation of TPMS-like cellular solids

Alistair Jones et al.

Summary: This study presents a structured approach to designing TPMS-like cellular solids and identifies the interactions between design parameters and evaluation metrics. The research found that the gyroid-surface structure provides the most flexibility and near-isotropic mechanical properties across a wide range of volume fractions.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of cycle number on the compression behavior of nonlinear periodically gradient porous structures produced by laser powder bed fusion

Mingkang Zhang et al.

Summary: This research focuses on the design and compression behavior of NL-TPMS, revealing the influence of gradient porosity on material properties and the periodic failure deformation of NL-TPMS.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Biomedical

Compressive anisotropy of sheet and strut based porous Ti-6Al-4V scaffolds

Helena Barber et al.

Summary: This study found that sheet-based triply periodic minimal surface (TPMS) scaffolds outperformed strut-based structures in terms of mechanical properties, with higher compressive strength and yield strength. All three topologies exhibited orientational dependence in mechanical properties, with the strut-based architecture showing a higher degree of anisotropy.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting

Xiaojie Fan et al.

Summary: This study introduces a novel method for designing graded-thickness TPMS structures and summarizes and compares the manufacturability, mechanical properties, and energy absorption capacities of Ti6Al4V graded samples with different thicknesses and TPMS types. The results reveal that constant-thickness TPMS samples exhibit good stiffness, strength, and energy absorption capacities, while graded-thickness samples avoid large stress fluctuations and show higher elastic moduli and cumulative energy absorption values than constant-thickness samples. Additionally, the local curvature distribution predicts the deformation behavior of TPMS structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties of multi-materials porous structures based on triply periodic minimal surface fabricated by additive manufacturing

Mingkang Zhang et al.

Summary: This study focuses on the mechanical properties of multi-materials porous structures manufactured by selective laser melting (SLM). Results show that the combination of high strength brittle material and low strength plastic material improves compression mode, and the plastic material plays a role in buffering fracture.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastic response of anisotropic Gyroid cellular structures under compression: Parametric analysis

Xing Peng et al.

Summary: The research focused on controlling the anisotropy of Gyroid cellular structure (GCS) by changing its geometrical parameters, and discussed the factors affecting the anisotropic elastic response, including structure anisotropy, porosity, and loading direction. Combining the porosity and anisotropic models of GCS can offer a scaffold that matches closely the human bone mechanical environment.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Multiphysics modelling of photon, mass and heat transfer in coral microenvironments

Shannara Kayleigh Taylor Parkins et al.

Summary: Coral reefs are built by calcifying coral animals that engage in a symbiosis with dinoflagellate microalgae. A multiphysics modeling approach using Monte Carlo simulations has been used to study the light, temperature, and oxygen gradients in coral tissue and skeleton, providing insights into the structure-function mechanisms that shape the microenvironment and ecophysiology of the coral symbiosis in response to environmental change.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structural Orientation and Anisotropy in Biological Materials: Functional Designs and Mechanics

Zengqian Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Optimizing the pinch-off problem for gradient triply periodic minimal surface cellular structures manufactured by selective laser melting

Mingkang Zhang et al.

RAPID PROTOTYPING JOURNAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural features and compressive properties of SLM Ti6Al4V lattice structures

Jinguo Ge et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Biomedical

Investigation on the orientation dependence of elastic response in Gyroid cellular structures

Lei Yang et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Engineering, Biomedical

Bioinspirational understanding of flexural performance in hedgehog spines

Christopher J. Drol et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Article Biophysics

Fracture Mechanism and Fracture Toughness at the Interface Between Cortical and Cancellous Bone

Pankaj Shitole et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Engineering, Biomedical

The anisotropic elastic behavior of the widely-used triply-periodic minimal surface based scaffolds

Yongtao Lu et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties

Lei Yang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Computer Science, Software Engineering

Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing

Dawei Li et al.

COMPUTER-AIDED DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of architecture on the mechanical properties of cellular structures based on the IWP minimal surface

Oraib Al-Ketan et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Minimal surface designs for porous materials: from microstructures to mechanical properties

Xiaoyang Zheng et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

AFM Identification of Beetle Exocuticle: Bouligand Structure and Nanofiber Anisotropic Elastic Properties

Ruiguo Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications

Zengqian Liu et al.

PROGRESS IN MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds

Volker Weissmann et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Biomedical

Asymmetric flexural behavior from bamboo's functionally graded hierarchical structure: Underlying mechanisms

Meisam K. Habibi et al.

ACTA BIOMATERIALIA (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Textured fluorapatite bonded to calcium sulphate strengthen stomatopod raptorial appendages

Shahrouz Amini et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Natural Flexible Dermal Armor

Wen Yang et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Mechanical adaptability of the Bouligand-type structure in natural dermal armour

Elizabeth A. Zimmermann et al.

NATURE COMMUNICATIONS (2013)

添加到收藏夹

Article Engineering, Biomedical

Minimal surface scaffold designs for tissue engineering

Sebastian C. Kapfer et al.

BIOMATERIALS (2011)

添加到收藏夹

Article Chemistry, Physical

Materials design principles of ancient fish armour

Benjamin J. F. Bruet et al.

NATURE MATERIALS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.