☆ 4.6 Article

Fully Printed HTL-Free MAPbI(3) Perovskite Solar Cells with Carbon Electrodes

COATINGS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Nanocellulose-Carboxymethylcellulose Electrolyte for Stable, High-Rate Zinc-Ion Batteries

Lin Xu et al.

Summary: In this study, a nanocellulose-carboxymethylcellulose (CMC) hydrogel electrolyte is demonstrated for aqueous Zn ion batteries (ZIBs) that features stable cycling performance and high Zn2+ conductivity. With this electrolyte, the Zn-metal anode shows exceptional cycling stability at an ultra-high rate, with the ability to sustain a current density as high as 80 mA cm(-2) for more than 3500 cycles. Full Zn||MnO2 batteries fabricated with this electrolyte demonstrate excellent high-rate performance and long-term cycling stability. It suggests the cellulose-CMC electrolyte as a promising low-cost and easy-to-fabricate aqueous-based electrolyte for ZIBs.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Performance Photodetector with a-IGZO/PbS Quantum Dots Heterojunction

Cong Zhang et al.

Summary: This paper reports a novel amorphous indium gallium zinc oxide/lead sulfide quantum dots (a-IGZO/PbS QDs) heterojunction photoconductor. By innovatively increasing the photocurrent by several orders of magnitude without generating additional noise, the sensitivity and responsiveness of the device have been improved. Compared with the initial pure PbS QDs-based photoconductor, the heterojunction device can increase the photocurrent by 3000 times and improve the response speed of the device with the help of interface-assisted carrier separation and recombination. In the NIR band, the device exhibits exciting performance with a detectivity of 1.53 x 10^13 Jones, a responsivity of 19070 mA/W, and a decay time of 0.39 ms. By applying the a-IGZO/PbS QDs heterojunction to paper-based devices, a flexible device with bending resistance can be obtained, and the detection performance of the device does not deteriorate after 1000 times of bending.

ACS PHOTONICS (2023)

添加到收藏夹

Article Chemistry, Physical

Piezo-phototronic effect in highly stable CsPbI3-PVDF composite for self-powered nanogenerator and photodetector

Kuntal Maity et al.

Summary: The inorganic cesium lead iodide and PVDF composite material show excellent performance in fabrication of nanogenerators and photodetectors, exhibiting a unique piezo-phototronic effect with promising potential in next generation piezotronic and optoelectronic applications.

NANO ENERGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stable CsPbX3 (Br/Cl) Perovskite Nanocrystal Layer Passivated with Al-Doped CdSe for Blue Light-Emitting Diodes

Muhammad Amin Padhiar et al.

Summary: Perovskite nanocrystals (PNCs) with adjustable emission bands and high photoluminescence are ideal for optical devices. This study introduces a simple strategy to enhance the stability of blue-light emitting PNCs, achieving highly stable PNCs with changes in bandgaps and PLQY values. The doped PNCs show potential for use as color converters in liquid crystal displays (LCDs) and demonstrate remarkable stability under various ambient conditions.

ACS APPLIED NANO MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Suppression of Coffee-Ring Effect in Air-Processed Inkjet-Printed Perovskite Layer toward the Fabrication of Efficient Large-Sized All-Printed Photovoltaics: A Perovskite Precursor Ink Concentration Regulation Strategy

Dimitris A. Chalkias et al.

Summary: This study focuses on the development of high-efficiency, stable, and reproducible large-sized all-printed perovskite modules using piezoelectric drop-on-demand inkjet-printing technology. The influence of perovskite precursor ink concentration on inkjet performance, substrate wettability, and the characteristics of the printed perovskite layers and photovoltaics were investigated. The results demonstrate that regulating the ink concentration effectively suppresses the coffee-ring effect and improves the quality and efficiency of the printed perovskite layers and photovoltaics.

SOLAR RRL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Methylamine-Based Method to Deposit MAPbI3 Nanoscale-Thick Films for Efficient Perovskite Solar Cells with Carbon Electrodes

Shoaib Iqbal et al.

Summary: This study reports a method for precise morphology control in the ambient environment for the fabrication of carbon-based, low-temperature solar cells. The method enhances carrier transportation along the vertical direction and reduces carrier recombination, resulting in improved power conversion efficiency for the cells.

ACS APPLIED NANO MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Mechanical stress and morphology evolution in RuO2 thin film electrodes during lithiation and delithiation

Lin Xu et al.

Summary: RuO2 is a promising electrode material for thin film lithium-ion batteries, due to its excellent properties such as large volumetric charge capacity, high rate capability, and excellent cyclability. In this study, the evolution of mechanical stress during lithiation and delithiation of RuO2 was investigated and compared with Si and Ge thin film electrodes. The results show that the behavior of the mechanical stress in RuO2 is fundamentally different, mainly due to the reversibility of the solid electrolyte interface (SEI) formation on RuO2. The small tensile stress during delithiation of RuO2 allows for better accommodation of the stress induced by volume changes, which may contribute to its better cyclability compared to Si and Ge films.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Energy & Fuels

DFT and AMPS-1D simulation analysis of all-perovskite solar cells based on CsPbI3/FAPbI3 bilayer structure

Ali Hajjiah et al.

Summary: This study investigates the performance and stability of an all-perovskite solar cell with a CsPbI3/FAPbI(3) heterojunction structure. The optimized bilayer structure shows high efficiency and performance.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Chemistry, Physical

Synthesizing Carbon-Supported, High-Loading, Ultra-Small Pt3Ni Nanoparticles via Tuning the Surface Electrostatic Effect

Shuke Li et al.

Summary: This study reports a facile approach to synthesize high-loading and ultra-small carbon-supported Pt3Ni nanoparticles. By applying thermal shock on strongly interacted carbon support with metal salt, the synthesis achieves high particle loading and small size. The approach can be extended to various compositions and substrates, substantially expanding the synthesis space for nanoparticle catalysts in electrochemical applications.

SMALL STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A sustainable chitosan-zinc electrolyte for high-rate zinc-metal batteries

Meiling Wu et al.

Summary: A chitosan-Zn electrolyte with high mechanical strength, Zn2+ conductivity, and water bonding capability is demonstrated for high-performance Zn-metal batteries. It enables desirable Zn-deposition morphology and shows exceptional cycling stability and rate performance.

MATTER (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perovskite Solar Cells with All-Inkjet-Printed Absorber and Charge Transport Layers

Fabian Schackmar et al.

Summary: In this study, scalable and material-efficient perovskite solar cells (PSCs) with inkjet-printed absorber and charge extraction layers were developed, showing an efficiency of >17% and low hysteresis. The devices exhibited excellent short-term stability even under elevated temperature, marking a promising step towards fully inkjet-printed perovskite solar cells.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Using steric hindrance to manipulate and stabilize metal halide perovskites for optoelectronics

Yanfeng Miao et al.

Summary: Utilizing steric hindrance is a promising strategy to manipulate and stabilize metal halide perovskites, which also influences the fundamental kinetics of perovskite crystallization and film formation processes. The important role of steric hindrance for stabilizing and passivating perovskites has been demonstrated in recent studies.

CHEMICAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanisms of the cyclic (de)lithiation of RuO2

Lin Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

A pressure process for efficient and stable perovskite solar cells

Junsheng Luo et al.

NANO ENERGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Chemical stability and instability of inorganic halide perovskites

Yuanyuan Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Energy & Fuels

Up-scalable sheet-to-sheet production of high efficiency perovskite module and solar cells on 6-in. substrate using slot die coating

Francesco Di Giacomo et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

添加到收藏夹

Article Chemistry, Physical

One-step roll-to-roll air processed high efficiency perovskite solar cells

Chuantian Zuo et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Efficient solar cells with enhanced humidity and heat stability based on benzylammonium-caesium-formamidinium mixed-dimensional perovskites

Guozhen Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carrier Dynamics Engineering for High-Performance Electron-Transport-Layer-free Perovskite Photovoltaics

Qiwei Han et al.

CHEM (2018)

添加到收藏夹

Review Chemistry, Physical

Printable carbon-based hole-conductor-free mesoscopic perovskite solar cells: From lab to market

Miao Duan et al.

MATERIALS TODAY ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Efficient spin-coating-free planar heterojunction perovskite solar cells fabricated with successive brush-painting

Jin-Won Lee et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

W-doped TiO2 mesoporous electron transport layer for efficient hole transport material free perovskite solar cells employing carbon counter electrodes

Yuqing Xiao et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boron Doping of Multiwalled Carbon Nanotubes Significantly Enhances Hole Extraction in Carbon-Based Perovskite Solar Cells

Xiaoli Zheng et al.

NANO LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of precursor solution composition on the performance and I-V hysteresis of perovskite solar cells based on CH3NH3PbI3-xClx

Z. L. Zhang et al.

NANOSCALE RESEARCH LETTERS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules

Han Chen et al.

NATURE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells

Ming He et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells

Yaoguang Rong et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A contact study in hole conductor free perovskite solar cells with low temperature processed carbon electrodes

J. Li et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Physical

Material nucleation/growth competition tuning towards highly reproducible planar perovskite solar cells with efficiency exceeding 20%

Bin Ding et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

Inducing swift nucleation morphology control for efficient planar perovskite solar cells by hot-air quenching

Seulki Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

Control of preferred orientation with slow crystallization for carbon-based mesoscopic perovskite solar cells attaining efficiency 15%

Cheng-Min Tsai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of precursor solution composition on the performance and I-V hysteresis of perovskite solar cells based on CH3NH3PbI3-xClx

Z. L. Zhang et al.

NANOSCALE RESEARCH LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Temperature Soft-Cover Deposition of Uniform Large-Scale Perovskite Films for High-Performance Solar Cells

Fei Ye et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering

Yongzhen Wu et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Engineering, Environmental

Boron and phosphorus co-doped carbon counter electrode for efficient hole-conductor-free perovskite solar cell

Ming Chen et al.

CHEMICAL ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inverted perovskite solar cells based on lithium-functionalized graphene oxide as an electron-transporting layer

Esmaiel Nouri et al.

CHEMICAL COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

Epitaxial Electrodeposition of Methylammonium Lead Iodide Perovskites

Jakub A. Koza et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Hole-Conductor-Free Fully Printable Mesoscopic Solar Cell with Mixed-Anion Perovskite CH3NH3PbI(3-x)(BF4)x

Jiangzhao Chen et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Colloidal Precursor-Induced Growth of Ultra-Even CH3NH3PbI3 for High-Performance Paintable Carbon-Based Perovskite Solar Cells

Xiaowen Chang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hysteresis-Suppressed High-Efficiency Flexible Perovskite Solar Cells Using Solid-State Ionic-Liquids for Effective Electron Transport

Dong Yang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications

Yixin Zhao et al.

CHEMICAL SOCIETY REVIEWS (2016)

添加到收藏夹

Article Electrochemistry

Low-temperature prepared carbon electrodes for hole-conductor-free mesoscopic perovskite solar cells

Guoqiang Yue et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Soft-cover deposition of scaling-up uniform perovskite thin films for high cost-performance solar cells

Fei Ye et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Multi-walled carbon nanotubes act as charge transport channel to boost the efficiency of hole transport material free perovskite solar cells

Nian Cheng et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Using a low-temperature carbon electrode for preparing hole-conductor-free perovskite heterojunction solar cells under high relative humidity

Zhiyong Liu et al.

NANOSCALE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells

Xiong Li et al.

SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Solvent Engineering Boosts the Efficiency of Paintable Carbon-Based Perovskite Solar Cells to Beyond 14%

Haining Chen et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

An amorphous precursor route to the conformable oriented crystallization of CH3NH3PbBr3 in mesoporous scaffolds: toward efficient and thermally stable carbon-based perovskite solar cells

Haining Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Materials Science, Biomaterials

Green preparation of nitrogen-doped carbon dots derived from silkworm chrysalis for cell imaging

Ji Feng et al.

JOURNAL OF MATERIALS CHEMISTRY B (2016)

添加到收藏夹

Article Chemistry, Physical

Two-step ultrasonic spray deposition of CH3NH3PbI3 for efficient and large-area perovskite solar cell

Haibo Huang et al.

NANO ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Solvent effect on the hole-conductor-free fully printable perovskite solar cells

Jiangzhao Chen et al.

NANO ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Metal halide perovskites for energy applications

Wei Zhang et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Square-Centimeter Solution-Processed Planar CH3NH3PbI3 Perovskite Solar Cells with Efficiency Exceeding 15%

Mengjin Yang et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

p-Type mesoscopic NiO as an active interfacial layer for carbon counter electrode based perovskite solar cells

Zonghao Liu et al.

DALTON TRANSACTIONS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers

Yehao Deng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

添加到收藏夹

Article Chemistry, Physical

Low-Temperature Processed and Carbon-Based ZnO/CH3NH3Pbl3/C Planar Heterojunction Perovskite Solar Cells

Huawei Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Physical

Efficient mesoscopic perovskite solar cells based on the CH3NH3PbI2Br light absorber

Kun Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Physical

Hysteresis-free multi-walled carbon nanotube-based perovskite solar cells with a high fill factor

Zhanhua Wei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Physical

3D Printer Based Slot-Die Coater as a Lab-to-Fab Translation Tool for Solution-Processed Solar Cells

Doojin Vak et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

Zhanhua Wei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

Manda Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lead Methylammonium Triiodide Perovskite-Based Solar Cells: An Interfacial Charge-Transfer Investigation

Xiaobao Xu et al.

CHEMSUSCHEM (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition

Alexander T. Barrows et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability

Anyi Mei et al.

SCIENCE (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of Air-Knife Wiping on Coating Thickness in Hot-Dip Galvanizing

Zhang Yan et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2012)

添加到收藏夹

Article Thermodynamics

A Study of the Influence of Air-knife Tilting on Coating Thickness in Hot-dip Galvanizing

Tae-Seok Cho et al.

JOURNAL OF THERMAL SCIENCE (2009)

添加到收藏夹

Article Engineering, Chemical

Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties

Asim K. Ghosh et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

添加到收藏夹

Article Thermodynamics

Experimental and computational studies on Coanda nozzle flow for the air knife application

Soon-Bum Kwon et al.

JOURNAL OF THERMAL SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.