☆ 4.7 Article

Control of mechanical and shape memory characteristics in martensitic NiTi by setting L-PBF parameters and build orientation

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance

Jia-Ning Zhu et al.

Summary: The effect of hatch distance on microstructure and functional properties of L-PBF NiTi shape memory alloys is investigated. It is found that the phase transformation temperatures do not decrease proportionally with hatch distance, but rather relate to a critical value. Below this critical value, epitaxial grain growth and in situ recrystallization are enhanced, while above, irregular grains and decreased dislocations are formed. However, the critical value exhibits high dislocation density and fine grain size, resulting in superior thermal cyclic stability.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Standard mechanical testing is inadequate for the mechanical characterisation of shape-memory alloys: Source of errors and a new corrective approach

Sofia Di Leonardo et al.

Summary: Thanks to its unique superelastic response, Nitinol has become the preferred material in many critical applications, especially in the medical implant field. However, the reversible phase transformation that gives rise to its exceptional behavior also makes its mechanical characterization complex, hindering the assumptions underlying common uniaxial tensile testing. This study analyzes the spurious effects introduced by the unconventional material behavior during uniaxial tensile testing using digital image correlation (DIC), and proposes a more accurate and systematic testing approach.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of laser scanning speed on the microstructure, phase transformation and mechanical property of NiTi alloys fabricated by LPBF

Wenqian Guo et al.

Summary: This study examined the impact of laser scanning speed on microstructure, phase transformation, and properties of NiTi alloys fabricated by laser powder bed fusion (LPBF). The experiment results revealed that nickel evaporation and precipitation were the primary factors affecting the transformation temperature and heat of NiTi alloys. Increasing scanning speed reduced nickel loss and widened the transformation temperature range, but also increased the microstructure non-uniformity. Despite different scanning speeds, all alloys exhibited high strain capabilities and excellent shape memory effect.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Control of Ni-Ti phase structure, solid-state transformation temperatures and enthalpies via control of L-PBF process parameters

Josiah Cherian Chekotu et al.

Summary: Nitinol samples were produced using Laser Powder Bed Fusion (L-PBF) technique with systematic variations in laser power, scan speed, and hatch spacing. The control of L-PBF parameters allowed for control of the part's chemical composition and phase transformation temperatures. The laser process parameters had a significant effect on the transformation temperatures of martensite and austenite. Additionally, the volumetric energy density was directly correlated with cooling and heating enthalpies.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation and characterization of nitinol stents produced by selective laser melting with various process parameters

Lina Yan et al.

Summary: This study investigates the impact of process parameters on the selective laser melting (SLM) fabrication of thin nitinol medical devices, and successfully prints two different designs of superelastic nitinol stents. The results demonstrate that with suitable process parameters, SLM technology can accurately print thin nitinol devices with high density, uniform strut diameters, adequate superelasticity, and excellent biocompatibility.

PROGRESS IN ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Structural Porosity and Martensite Evolution on Mechanical Characteristics of Nitinol via In-Silico Finite Element Approach

Josiah Cherian Chekotu et al.

Summary: This study successfully modeled the mechanical behavior of superelastic NiTi using the Auricchio finite element model and validated it with experimental data. Microscale studies revealed the influence of martensite phase transformation on the material's response. Additionally, the study found that porosity in laser powder bed fusion processes has macroscopic effects on structural stiffness, energy dissipation, and damping properties.

MATERIALS (2022)

添加到收藏夹

Article Automation & Control Systems

Toward understanding the effect of remelting on the additively manufactured NiTi

Parisa Bayati et al.

Summary: By modifying the selective laser melting (SLM) approach for NiTi, a method called "remelting" was proposed to reduce internal micropores/voids and improve surface roughness; proper combinations of remelting process parameters can lead to fabricating NiTi components with increased density, fewer defects, and smoother surfaces, improving fatigue life and functionality of the parts.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem

Keyvan Safaei et al.

Summary: NiTi shape memory alloys are widely used in biomedical applications due to their unique properties, and when combined with additive manufacturing, they have the potential to revolutionize the biomedical industry. This article discusses the potential biomedical applications of NiTi fabricated using AM processes, focusing on LPBF technique. It reviews the manufacturability, quality, phases, microstructure, properties, challenges, and opportunities associated with NiTi alloys produced via AM processing.

JOM (2021)

添加到收藏夹

Article Engineering, Biomedical

Full-field microscale strain measurements of a nitinol medical device using digital image correlation

Kenneth I. Aycock et al.

Summary: This study demonstrates the use of microscale two-dimensional digital image correlation (2D-DIC) to directly characterize full-field surface strains on a nitinol medical device under physiological and hyperphysiological loading conditions. The results show sub-millimeter fields of view, sub-micron displacement accuracies, and potential for providing a practical solution for characterizing cardiovascular implant micromechanics.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

Stanislav V. Chernyshikhin et al.

Summary: Nickel-titanium shape-memory alloys have unique functional properties that enable various applications, and selective laser melting allows for low-cost customization and manufacturing of complex geometries. Optimization of process parameters is crucial for maintaining high mass density and functional properties.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Towards an understanding of the functional properties of NiTi produced by powder bed fusion

Adelaide Nespoli et al.

Summary: Near fully dense NiTi components were fabricated using selective laser beam melting with a 55.2Ni-Ti (wt.%) powder. The effect of the manufacturing process on mechanical and functional properties was systematically investigated by tuning the process parameters, showing distinct damping and strain recovery responses in the resulting material. The as-built NiTi parts exhibited phase transformation temperatures higher than those of the feedstock.

PROGRESS IN ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of equiatomic Ti-Ni alloy fabricated by selective laser melting

D. C. Ren et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Review Chemistry, Physical

Shape Memory Alloys for Aerospace, Recent Developments, and New Applications: A Short Review

Girolamo Costanza et al.

MATERIALS (2020)

添加到收藏夹

Article Instruments & Instrumentation

Evolution of transformation characteristics of shape memory alloys during cyclic loading: transformation temperature hysteresis and residual martensite

Xiaojun Gu et al.

SMART MATERIALS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective Laser Melting of NiTi Shape Memory Alloy: Processability, Microstructure, and Superelasticity

Carlo Alberto Biffi et al.

SHAPE MEMORY AND SUPERELASTICITY (2020)

添加到收藏夹

Article Chemistry, Physical

A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: The grain size effect

Xiaohui Bian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Review Chemistry, Physical

Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production

Josiah Cherian Chekotu et al.

MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultrahigh-performance TiNi shape memory alloy by 4D printing

H. Z. Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive Manufacturing of Ni-Rich NiTiHf20: Manufacturability, Composition, Density, and Transformation Behavior

M. Nematollahi et al.

SHAPE MEMORY AND SUPERELASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi

Soheil Saedi et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting

Narges Shayesteh Moghaddam et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additive manufacturing of NiTiHf high temperature shape memory alloy

Mohammad Elahinia et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile actuation response of additively manufactured nickel-titanium shape memory alloys

J. Sam et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective laser melting produced layer-structured NiTi shape memory alloys with high damping properties and Elinvar effect

Xiebin Wang et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Review Chemistry, Physical

A Short Review on the Microstructure, Transformation Behavior and Functional Properties of NiTi Shape Memory Alloys Fabricated by Selective Laser Melting

Xiebin Wang et al.

MATERIALS (2018)

添加到收藏夹

Article Mechanics

Modeling of propagation of phase transformation fronts in NiTi under uniaxial tension

Dongjie Jiang et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)

添加到收藏夹

Article Engineering, Biomedical

Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison

M. Speirs et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ observation on temperature dependence of martensitic transformation and plastic deformation in superelastic NiTi shape memory alloy

Yao Xiao et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Control of phase transformations and microstructure for optimum realization of one-way and two-way shape memory effects in removable surgical clips

E. Ryklina et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser additive manufacturing of bulk and porous shape-memory NiTi alloys: From processes to potential biomedical applications

Sasan Dadbakhsh et al.

MRS BULLETIN (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fabrication of NiTi through additive manufacturing: A review

Mohammad Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the Transformation Behavior of NiTi Shape-Memory Alloy Produced by SLM

Mathew Speirs et al.

SHAPE MEMORY AND SUPERELASTICITY (2016)

添加到收藏夹

Article Mechanics

Development of martensite transformation kinetics of NiTi shape memory alloys under compression

Young-Ik Yoo et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of SLM Parameters on Transformation Temperatures of Shape Memory Nickel Titanium Parts

Sasan Dadbakhsh et al.

ADVANCED ENGINEERING MATERIALS (2014)

添加到收藏夹

Article Mechanics

Thermomechanical modelling of a NiTi SMA sample submitted to displacement-controlled tensile test

Dorian Depriester et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure of selective laser melted nickel-titanium

Therese Bormann et al.

MATERIALS CHARACTERIZATION (2014)

添加到收藏夹

Article Instruments & Instrumentation

On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing

Christoph Haberland et al.

SMART MATERIALS AND STRUCTURES (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Investigation of Nucleation and Growth of Detwinning Mechanism in Martensitic Single Crystal NiTi Using Digital Image Correlation

Savas Dilibal

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tailoring Selective Laser Melting Process Parameters for NiTi Implants

Therese Bormann et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solid, shape recovered bulk Nitinol: Part I-Tension-compression asymmetry

Anil Saigal et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys

T. Simon et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips

Xinghua Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

添加到收藏夹

Article Engineering, Mechanical

Tips and tricks for characterizing shape memory alloy wire: Part 1 - Differential scanning calorimetry and basic phenomena

J. A. Shaw et al.

EXPERIMENTAL TECHNIQUES (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser processing of net-shape NiTi shape memory alloy

B. Vamsi Krishna et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)

添加到收藏夹

Article Instruments & Instrumentation

Shape recovery of NiTi shape memory alloy under various pre-strain and constraint conditions

K Wada et al.

SMART MATERIALS AND STRUCTURES (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Twinning and detwinning of ⟨0 1 1⟩ type II twin in shape memory alloy

Y Liu et al.

ACTA MATERIALIA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.