☆ 4.7 Article

Microstructure and properties of AlCrFeNiMoNb high-entropy alloys coating on ZM5 magnesium alloy prepared by high-velocity air fuel (HVAF) spray

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Coatings & Films

Facile fabrication of robust superhydrophobic coating for enhanced corrosion protection on AZ91 magnesium alloy by electroless Ni-B/GO plating

Yongjun Zhang et al.

Summary: In this research, a robust superhydrophobic Ni-B/GO composite coating was successfully fabricated on AZ91 magnesium alloy using electroless plating, followed by chemical modification. The coating displayed strong physical/chemical stability, outstanding self-cleaning, and excellent corrosion resistance. This study offers an innovative perspective for fabricating micro/nano rough structures on magnesium alloy and provides a low-cost, eco-friendly method for the industrial application of superhydrophobic coatings.

SURFACE & COATINGS TECHNOLOGY (2023)

添加到收藏夹

Article Electrochemistry

Strategies to engineer FeCoNiCuZn high entropy alloy composition through aqueous electrochemical deposition

Kunda Siri Kiran Janardhana Reddy et al.

Summary: Low melting point elements hinder the exploration of high entropy alloys containing zinc. Electrodeposition in an aqueous medium is a useful alternative for synthesizing multi-component/high entropy alloys. In this study, FeCoNiCuZn high entropy alloy was successfully fabricated through electrodeposition by varying input parameters, and the effects of these parameters on the composition, phase, and morphology of the deposited films were investigated. It was found that the composition of the electrodeposited alloy was highly dependent on the input pulse parameters and pH, while substrate roughness had no significant influence.

ELECTROCHIMICA ACTA (2023)

添加到收藏夹

Article Chemistry, Physical

Synthesis and microstructure, properties characterization of Ni-Ti-Cu/Cu-Al functionally graded coating on Mg-Li alloy by laser cladding

Lipeng Jiang et al.

Summary: The Ni-Ti-Cu/Cu-Al functionally graded coating was proposed and successfully prepared on Mg-Li alloy, exhibiting excellent performance. The top-layer was unaffected by dilution and substrate evaporation, improving the corrosion and wear resistance of the alloy significantly.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Ceramics

Corrosion resistance mechanisms of detonation sprayed Fe-based amorphous coating on AZ31B magnesium alloy

Haimin Zhai et al.

Summary: The microstructure and corrosion mechanisms of detonation sprayed Fe-based amorphous coating on AZ31B magnesium alloy substrate were studied. The coating presented a typical amorphous structure and had a low porosity. Its excellent corrosion resistance was mainly attributed to its unique disordered structure, uniform chemical composition, and the formation of a uniform passive film on the surface.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High velocity air fuel (HVAF) spraying of nickel phosphorus-coated cubic-boron nitride powders for realizing high-performance tribological coatings

Sribalaji Mathiyalagan et al.

Summary: This study utilized high velocity air fuel spraying to develop high-performance large area tribological coatings of nickel phosphorus cladded cubic-boron nitride particles. The effects of different nozzle configurations and annealing on coating properties were investigated. The study also analyzed the wear mechanisms of the coatings and the impact of annealing on their performance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of cold sprayed aluminum bronze coating on MBLS10A-200 magnesium-lithium alloy

Simin Wan et al.

Summary: The research comprehensively analyzed aluminum bronze coatings, demonstrating their potential in improving the surface properties of magnesium-lithium alloys. The prepared aluminum bronze coatings were found to have higher hardness and wear resistance, as well as excellent corrosion resistance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructures, wear resistance and corrosion resistance of CoCrFeNi high entropy alloys coating on AZ91 Mg alloy prepared by cold spray

Jian Zhu et al.

Summary: A fully dense CoCrFeNi high entropy alloys (HEAs) coating with uniform microstructure was successfully prepared on AZ91 alloy by cold spray, exhibiting excellent corrosion resistance and surface protection for Mg alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and electrical conductivity of electroless copper plating layer on magnesium alloy micro-arc oxidation coating

Tao Li et al.

Summary: Electroless copper plating was performed to impart electrical conductivity to the magnesium alloy micro-arc oxidation (MAO) coating. The optimized plating temperature and complexing agent concentration were found to be 60 degrees C and 30 g/L, respectively. The plated specimen achieved a square resistance of 0.03 Omega/ after the third stage, indicating excellent electrical conductivity without significantly reducing its corrosion resistance.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufactured high entropy alloys: A review of the microstructure and properties

Wei Zhang et al.

Summary: This article summarizes the microstructure characteristics, mechanical properties, and functional properties of additive manufactured high entropy alloys (HEAs), providing a fundamental understanding of this research field. The article also discusses the current challenges and future work in this area.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Optics

In-situ synthesis of NiCoCrMnFe high entropy alloy coating by laser cladding

F. K. Shi et al.

Summary: In-situ synthesis of a NiCoCrMnFe high entropy alloy coating on H13 die steel through multilayer laser cladding can significantly improve the surface microhardness, wear resistance, and especially hot erosion resistance of the steel.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Design and characterization of AlNbMoTaCux high entropy alloys laser cladding coatings

S. S. Liu et al.

Summary: AlNbMoTaCu(x) high entropy alloy coatings were successfully synthesized on Ti6Al4V through laser cladding. The addition of copper effectively suppressed porosity and crack defects. The increase in copper content resulted in improved toughness and reduced micro-hardness of the coatings. The wear resistance of AlNbMoTaCu coatings was significantly enhanced, with the AlNbMoTaCu0.4 coatings exhibiting excellent wear resistance.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

HVAF deposition mechanism of γ-TiAl-based coating containing β phase

Yichuan Yin et al.

Summary: The study shows that the coordinated deformation between Ti-Al particles and Al alloy matrix is crucial for the deposition of the coating. Both mechanical and metallurgical bonding exist between the spraying particles during the coating formation process, and beta phase grains can form typical structures.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation conditions of vortex-like intermixing interfaces in cold spray

Shuo Yin et al.

Summary: The experimental investigation explored the formation conditions and mechanisms of the unexplained intermixing phenomenon at the substrate-coatings interface. Severe plastic deformation at the interface is crucial for intermixing, with low deposition efficiency and material properties identified as critical factors. The hypothesis of the intermixing interface formation mechanism is proposed based on the experimental analyses.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wear and corrosion properties of B4C-added CoCrNiMo high-entropy alloy coatings with in-situ coherent ceramic

Di Jiang et al.

Summary: In this study, a coherent ceramic strengthening wear-corrosion resistant CoCrNiMo high entropy alloy coating was successfully fabricated on 304 stainless steel through laser cladding. By evaluating the microstructure, chemical composition, hardness, wear resistance, and corrosion resistance, it was found that a critical content of 2-3 at.% of B4C exists for achieving the best wear-corrosion tradeoff of the coating. This strategy can be valuable in the development of equipment that is both wear- and corrosion-resistant in marine environments.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mg17Al12 phase refinement and the improved mechanical performance of Mg?6Al alloy with trace erbium addition

K. Korgiopoulos et al.

Summary: The study demonstrates that the mechanical properties of Mg-6wt% Al casting alloy can be significantly improved by adding low levels of Er, due to the modifying effect of Er on Mg17Al12 precipitates and α-Mg. The presence of Er influences the formation temperature of Al2Er Laves, affecting the inoculating effect of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Fabrication of FeCoCrNiMnAl0.5-FeCoCrNiMnAl gradient HEA coating by laser cladding technique

Yan Cui et al.

Summary: In this study, a gradient high-entropy alloy coating was fabricated by laser cladding, showing excellent balance between strength and toughness and reducing cracking tendency during high temperature compression, thus extending the service life of the coating surface.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Characterization and elevated-temperature tribological performance of AC-HVAF-sprayed Fe-based amorphous coating

Dandan Liang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Enhancing structural integrity, corrosion resistance and wear properties of Mg alloy by heat treated cold sprayed Al coating

Sumera Siddique et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Design of [Al-(FeCoNi)12]AlxCr3-x HEAs based on cluster-plus-glue-atom model and its coating fabricated by laser cladding

Hongwei Lan et al.

INTERMETALLICS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Chlorine-induced high-temperature corrosion and erosion-corrosion of HVAF and HVOF-sprayed amorphous Fe-based coatings

Esmaeil Sadeghi et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and corrosion resistance of warm sprayed titanium coatings with polymer sealing for corrosion protection of AZ91E magnesium alloy

B. Moronczyk et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A physical-based yield strength model for the microstructural degradation of G115 steel during long-term creep

Bo Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Crystallography

Synthesis and Characterization of AlCoCrFeNiNbx High-Entropy Alloy Coatings by Laser Cladding

Hui Jiang et al.

CRYSTALS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of oxidation related structural defects on localized corrosion in HVAF-sprayed Fe-based metallic coatings

J. Wu et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the evolution of substrate's residual stress during cold spray process: A parametric study

Bahareh Marzbanrad et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of cold and detonation thermal spraying processes on the microstructure and properties of Al-based composite coatings on Mg alloy

Qiang Wang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

On the study of thermal-sprayed Ni0.2Co0.6Fe0.2CrSi0.2AlTi0.2 HEA overlay coating

Wei-Lin Hsu et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Isothermal oxidation behavior of HVAF-sprayed Ni and NiCr coatings in H2-H2O environment

E. Sadeghimeresht et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Thermally sprayed alumina and ceria-doped-alumina coatings on AZ91 Mg alloy

Sanjeet Kumar et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bi-layer nano-TiO2/FHA composite coatings on Mg-Zn-Ce alloy prepared by combined physical vapour deposition and electrochemical deposition methods

H. R. Bakhsheshi-Rad et al.

VACUUM (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Magnesium Alloys Developed for Biomedical Application: A Review

Nan Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and wear resistance of molybdenum based amorphous nanocrystalline alloy coating fabricated by atmospheric plasma spraying

X. B. Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Magnesium casting technology for structural applications

Alan A. Luo

JOURNAL OF MAGNESIUM AND ALLOYS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy

S. G. Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of Corrosion-Resistant Conversion Coatings for Magnesium and Its Alloys

X. B. Chen et al.

CORROSION (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Electroless nickel plating on ZM6 (Mg-2.6Nd-0.6Zn-0.8Zr) magnesium alloy substrate

Yanrui Gao et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys

K. Spencer et al.

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Physical

Mechanical characterization of the alloy Mg-14% Ti-1% Al-0.9% Mn (wt%) synthesized by physical vapour deposition

G Garcés et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.