☆ 4.7 Article

Interfacial microstructure and mechanical properties of 2124 aluminum alloy reinforced by AlCoCrFeNi high entropy alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Achieving ultrahigh strength and ductility in high-entropy alloys via dual precipitation

J. M. Guo et al.

Summary: This study presents an innovative approach to achieve a high strength-ductility synergy by dual precipitation of sheared and bypassed precipitates. The (Ni2Co2FeCr)96-xAl4Nbx (at.%) alloys strengthened by nanoscale L12 particles and Laves precipitates exhibit a yield strength of more than 1400 MPa, an ultimate tensile strength of over 1800 MPa, and a uniform elongation of 18%, achieving a high strength-ductility synergy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mesoscopic-scale complexity in macroscopically-uniform plastic flow of an Al0.3CoCrFeNi high-entropy alloy

Jamieson Brechtl et al.

Summary: This study explores the mesoscale complexity of macroscopically smooth plastic flow and reveals transitions between different dynamical regimes in the deformation behavior of high-entropy alloys (HEAs). The findings provide significant new insights into the micro/macro transition in HEAs.

ACTA MATERIALIA (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical Surface Modification of Al8Co19Cr23Fe32Ni18 in H2SO4: A High-Entropy Alloy with High Pitting Corrosion Resistance and High Oxidation Resistance

Li Pao et al.

Summary: An Al8Co19Cr23Fe32Ni18 high-entropy alloy with solid solution of Al was prepared and its pitting corrosion resistance in 0.1 M NaCl and high-temperature oxidation resistance at 1273 K were assessed. The addition of Al resulted in a lower pitting potential, attributed to Al in the surface oxide film and Al nitride inclusions in the metal matrix. Moreover, potentiodynamic polarization in 1 M H2SO4 improved the pitting corrosion resistance of the Al8Co19Cr23Fe32Ni18 alloy without decreasing its high-temperature oxidation resistance.

MATERIALS TRANSACTIONS (2023)

添加到收藏夹

Article Chemistry, Physical

Microstructure and corrosion properties of AlxCuFeNiCoCr(x=0.5, 1.0, 1.5, 2.0) high entropy alloys with Al content

Rong Hu et al.

Summary: In this study, AlxCoCrFeNiCu high entropy alloy was prepared using the powder metallurgy method. The effect of Al content on the microstructure and corrosion properties of the alloy was systematically investigated. The results showed that increasing Al content promoted the formation of the BCC structural phase. The Al1.0CoCrFeNiCu high entropy alloy exhibited good electrochemical corrosion properties, with corrosion primarily starting in the form of spot corrosion. The FCC structural phase demonstrated better resistance to nitric acid corrosion compared to the BCC structural phase.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Engineering, Mechanical

Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors

Yun Zhang et al.

Summary: Al0.5CoCrFeNi high-entropy alloy particles reinforced aluminum matrix composites (HEAps/AMCs) with various reinforcement additions were fabricated and their wear properties were investigated. It was found that a moderate range of reinforcement exhibited lower coefficient of friction and wear rate compared to the matrix alloy. The HEA particles hindered plastic deformation and improved the crack resistance of the composites through tight interface and interaction with dislocations.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of strong yet malleable bulk porous high entropy laves intermetallics via chemical immersion dealloying of eutectic high entropy alloys

Xiang Gao et al.

Summary: In this study, we successfully fabricated porous high entropy intermetallic (HEI) with a Laves phase by chemical immersion dealloying. The dealloyed HEI showed malleability, ultra-fine ligament size, and exhibited a higher specific strength compared to many porous metals reported previously.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

Defect reconfiguration in a Ti-Al alloy via electroplasticity

Shiteng Zhao et al.

Summary: The study revealed that electropulsing enhances cross-slip and twinning during the mechanical deformation of Ti-Al (7% Al) alloy, preventing dislocations from localizing into planar slip bands and delaying the early failure of the alloy during tension.

NATURE MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical behavior of deformable particles reinforced Al matrix composites

Tan Xin et al.

Summary: The use of SiCp/2024Al composite particles as deformable reinforcement in metal matrix composites showed higher toughness and comparable tensile strength compared to SiCp/Al composites with the same SiC particle content. The main deformation mechanism shifts with the increase in matrix strength, and uniform strain distribution was observed in the deformable particle/2024Al composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of FeCoNi1.5CrCu/2024Al composites prepared by microwave sintering

Hongming Wang et al.

Summary: The study demonstrated that with increasing sintering time, FeCoNi1.5CrCu high-entropy alloy particles in the 2024 aluminum matrix composites diffuse uniformly and then agglomerate, forming a high-density dislocation ring around the interface. Nanoindentation technique showed excellent interface micro-domains with high mechanical strength.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Insight of high-entropy alloy particles-reinforced 2219 Al matrix composites via the ultrasonic casting technology

Yun Zhang et al.

Summary: The introduction of high-entropy AlCoCrFeNi alloy particles into 2219 Al alloys via ultrasonic casting technology significantly reduced the average grain size of the aluminum matrix composites and improved their mechanical properties. An optimal addition of approximately 1.5 wt% of HEAps demonstrated the highest tensile strength and maximum micro-hardness, with various strengthening mechanisms contributing to the enhancement in yield strength.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Core-shell structure mediated microstructure and mechanical properties of high entropy alloy CoCrFeNi/Al composites

Yunzi Liu et al.

Summary: The study used CoCrFeNi high entropy alloy as reinforcement in HEA/Al composites, forming a core-shell structure that significantly improved compressive strength. However, the shell is prone to cracking under load, leading to reduced ductility in the composite.

VACUUM (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of spark plasma sintered AlCoFeMnNi high entropy alloy (HEA)-carbon nanotube (CNT) nanocomposite

Abbas Bahrami et al.

Summary: This paper investigates the concept and possibility of synthesizing high entropy alloy (HEA)/carbon nanotube (CNT) nanocomposites. AlCoFeMnNi was chosen as the matrix with added 1 wt% CNT as reinforcement. The study shows that CNT addition significantly enhances the maximum shear strength of the alloy, and discusses the implications for mechanical properties and microstructure of HEA/CNT nanocomposites.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

An overview of Aluminium Matrix Composites: Particulate reinforcements, manufacturing, modelling and machining

Samadhan Deshmukh et al.

Summary: Aluminium based metal matrix composites (MMCs) are in high demand for lightweight structures due to their superior properties. Researchers have contributed to the field of aluminium matrix composites (AMCs) through techniques like stir casting and Finite Element Analysis (FEA). This article provides an overview of the development and machining of MMCs, emphasizing the importance of simulation and research contributions.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigations on mechanical properties of Al-B4C metal matrix composites

S. Sathiyaraj et al.

Summary: The new aluminium boron carbide metal matrix composites are widely used in various fields, and stir casting is a simple and cost-effective manufacturing technique that has been employed for mass production. The mechanical properties of boron carbide aluminium reinforcement were analyzed, and the composites were distinguished by their hardness, tensile strength, and yield strength.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of B4C and SiC particles on aluminium metal matrix composites: A brief overview

Khoman Kumar et al.

Summary: This paper focuses on the enhancement of B4C and SiC improved workability of aluminium matrix composites, discussing the effect of reinforcement on metal matrix properties and highlighting the impact of different reinforcement percentages on mechanical properties and major applications of Al MMCs.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

New experimental studies on the phase diagram of the Al-Cu-Fe quasicrystal-forming system

Lilong Zhu et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving super-high strength in an aluminum based composite by reinforcing metallic glassy flakes

Z. Wang et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface modification of aluminum alloy by incorporation of AlCoCrFeNi high entropy alloy particles via underwater friction stir processing

Xiao Yang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites

Zhanwei Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Achieving room-temperature brittle-to-ductile transition in ultrafine layered Fe-Al alloys

Lu-Lu Li et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys

Peijian Shi et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, mechanical properties and machinability of particulate reinforced Al matrix composites: a comparative study between SiC particles and high-entropy alloy particles

Tiwen Lu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

Wenwen Sun et al.

SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Oxidation studies of Al alloys: Part I Al-Cu (liquid phase) alloy

G. Wu et al.

CORROSION SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles

Weiping Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing the deformation mechanisms of nanograins in gradient nanostructured Cu and CuAl alloys under tension

J. J. Wang et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity

Ge Wu et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation during high temperature aging of Al-Cu alloys: A multiscale analysis based on first principles calculations

H. Liu et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation

Lin Zhu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation

Shuhui Liu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strain-induced microstructure refinement in pure Al below 100 nm in size

W. Xu et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Zhifeng Lei et al.

NATURE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High dislocation density-induced large ductility in deformed and partitioned steels

B. B. He et al.

SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Study on microscopic ductile fracture of in-situ TiB2/2024 Al matrix composite

Su Jie et al.

21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular dynamics simulations of nano-indentation and wear of the γTi-Al alloy

Shuai Xu et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

添加到收藏夹

Article Engineering, Mechanical

Tribological response of AA 2024-T3 aluminium alloy coated with a DLC duplex coating

M. H. Staia et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optimizing the strength and ductility of spark plasma sintered Al 2024 alloy by conventional thermo-mechanical treatment

Ruixiao Zheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructures and mechanical properties of extruded 2024 aluminum alloy reinforced by FeNiCrCoAl3 particles

Zhi-wei Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

添加到收藏夹

Article Engineering, Mechanical

Fretting behaviour of glass-fibre-reinforced polypropylene composite against 2024 Al alloy

PV Antunes et al.

TRIBOLOGY INTERNATIONAL (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites

SJ Hong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.