☆ 4.7 Article

Effect of phase transformation on the ductile to brittle transition behavior of Ti-V-Nb-Zrx body-centered cubic high-entropy alloys at elevated temperatures

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Spinodal decomposition and the pseudo-binary decomposition in high-entropy alloys

Hengwei Luan et al.

Summary: In this study, the thermodynamic mechanism and general behavior of spinodal decomposition in high-entropy alloys (HEAs) were investigated. Contrary to the high mixing entropy theory, it was found that increasing the number of elements could increase the possibility of spinodal decomposition. The effects of temperature, entropy, and enthalpy were also clarified, and the high entropy effect on pseudo-binary decomposition was proposed. These findings provide a necessary paradigm for understanding and utilizing spinodal decomposition in HEAs.

ACTA MATERIALIA (2023)

添加到收藏夹

Article Chemistry, Physical

Phase transition and mechanical performance evolution in TiVZr-Nbx alloys

Y. Jiang et al.

Summary: This study analyzes the crystal structure, microstructure, and mechanical performance of TiVZr-Nbx alloys to investigate the transformation from a ternary alloy to a quaternary alloy. The use of high-performance and lightweight materials is crucial for the aerospace industry's technological advancements.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Designing lightweight dual-phase refractory VNbTiSi-based eutectic high-entropy alloys for use at elevated temperatures

Mingxu Wu et al.

Summary: This study designs a novel lightweight and refractory high-entropy alloy with the possibility of optimizing materials based on the high-entropy strategy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solving oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering

Zhengqi Wang et al.

Summary: In this study, large plasticity and high strength were achieved in NbMoTaW RHEAs through grain boundary engineering and the addition of metalloid B or C. The room-temperature brittleness of as-cast NbMoTaW RHEA was found to be caused by grain boundary segregation of oxygen, which was alleviated by the added metalloids, leading to a change in fracture morphology.

MATERIALS TODAY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system

Pramote Thirathipviwat et al.

Summary: Chemical compositions in the TiNbHfTaZr HEA system were found to have significant effects on lattice distortion and solid solution strengthening, with lattice distortion levels being proportional to atomic size misfit.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Intermediate temperature embrittlement in a precipitation-hardened high-entropy alloy: The role of heterogeneous strain distribution and environmentally assisted intergranular damage

B. X. Cao et al.

Summary: This study investigates the embrittlement of high-entropy alloys at intermediate temperatures, revealing the temperature-dependent tensile failure mechanism and emphasizing the role of heterogeneous strain distribution and environmental attack.

MATERIALS TODAY PHYSICS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

High temperature tensile properties of as-cast and forged CrMnFeCoNi high entropy alloy

Jie Sun et al.

Summary: This paper investigates the high temperature tensile properties of a single-phase FCC high entropy alloy and reveals that hot forging can refine the grain size and improve the tensile strength. The alloy exhibits different mechanical behaviors and fracture modes at different temperatures.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Overcoming the strength-ductility trade-off in refractory medium-entropy alloys via controlled B2 ordering

N. Yurchenko et al.

Summary: Controlled Al-induced B2 ordering helps overcome the strength-ductility dilemma in refractory medium-entropy alloys due to solid solution and short-range strengthening coupled with the dislocation motion changing.

MATERIALS RESEARCH LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures

J. X. Hou et al.

Summary: In this study, a novel high-entropy alloy (HEA) was designed using computation-aided thermodynamic modeling, which maintained a stable coherent precipitation microstructure. It was found that increasing the concentration of Cr in the alloy improved both the strength and ductility at room temperature, and eliminated intergranular embrittlement at high temperatures, resulting in a transition from brittleness to ductility.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Precipitation enhancing strain hardening capability of ductile AlTiVZrNb high-entropy alloys upon dynamic loading

Xutao Wang et al.

Summary: Strain softening upon dynamic loading is a roadblock for BCC structured HEAs, but in this study, precipitation of alpha 2 phase was applied to enhance strain hardening capability. The alpha 2 precipitates with BOR interface effectively reduce slip length and generate high density dislocations for hardening.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Rui Feng et al.

Summary: High-entropy alloys show promising applications at high temperatures and a single-phase alloy with high-temperature strength can be designed based on intrinsic material characteristics. The high-temperature strength retention is attributed to mechanisms such as large atomic-size and elastic-modulus mismatches, insensitive temperature dependence of elastic constants, and dominance of non-screw character dislocations caused by strong solute pinning.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Heterogenous columnar-grained high-entropy alloys produce exceptional resistance to intermediate-temperature intergranular embrittlement

B. X. Cao et al.

Summary: This study demonstrated a novel heterogenous columnar-grained (HCG) approach that can effectively overcome the severe intergranular embrittlement issue of high-entropy alloys (HEAs) at intermediate temperatures. The newly developed HCG-HEA exhibits exceptionally high resistance to intergranular fractures and shows a combination of high tensile ductility and yield strength at 800 degrees C. This finding provides a new insight into innovative design of high-temperature materials with extraordinary mechanical properties.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of the valence electron concentration on the yield strength of Ti-Zr-Nb-V high-entropy alloys

Jie Wang et al.

Summary: This study investigated the effect of valence electron concentration on the yield strength of high-entropy alloys (HEAs) by designing and preparing a series of Ti-Zr-Nb-V HEAs. Experimental results showed that alloys with a low V/Zr ratio exhibited a single-phase body-centered cubic (BCC) solid solution structure, while alloys with a high V/Zr ratio contained a small amount of V2Zr phase. The yield strength of the alloys increased with an increasing V/Zr ratio.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys

T. Yang et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Microband-induced plasticity in a Ti-rich high-entropy alloy

S. Zherebtsov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High temperature strength of refractory complex concentrated alloys

O. N. Senkov et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Counting electrons - A new approach to tailor the hydrogen sorption properties of high-entropy alloys

Magnus Moe Nygard et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

B. Schuh et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compositional variation effects on the microstructure and properties of a refractory high-entropy superalloy AlMo0.5NbTa0.5TiZr

O. N. Senkov et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Physical

Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy

Mingqing Liao et al.

INTERMETALLICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation-strengthened refractory Al0.5CrNbTi2V0.5 high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Force-matched empirical potential for martensitic transitions and plastic deformation in Ti-Nb alloys

Robert C. Ehemann et al.

PHYSICAL REVIEW B (2017)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al

H. Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy

Norihiko L. Okamoto et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling solid solution hardening in high entropy alloys

Isaac Toda-Caraballo et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Chemistry, Physical

Empirical design of single phase high-entropy alloys with high hardness

Fuyang Tian et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Chemistry, Physical

Structure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys

N. D. Stepanov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Al on structure and mechanical properties of AlxNbTiVZr (x=0, 0.5, 1, 1.5) high entropy alloys

N. D. Stepanov et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Properties of Aluminum-Containing Refractory High-Entropy Alloys

O. N. Senkov et al.

JOM (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: Microstructure and phase analysis

O. N. Senkov et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system

O. N. Senkov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solid-solution phase formation rules for multi-component alloys

Yong Zhang et al.

ADVANCED ENGINEERING MATERIALS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.