期刊
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
卷 27, 期 -, 页码 436-448出版社
ELSEVIER
DOI: 10.1016/j.jmrt.2023.09.289
关键词
Phase transformation; Ductile to brittle transition; Atomic size difference; Transgranular mode
By reducing the Zr concentration, the mechanical properties of the equimolar TiVNbZr alloy at high temperatures can be improved. The fabricated Zrx alloys showed higher strength than TiVNbZr at temperatures above 800 degrees C, but exhibited some special mechanical responses at 800 degrees C, including cracks along grain boundaries and brittle fracture. Local stress concentration and phase transformation were responsible for these responses.
Single-phase body-centered cubic (BCC) lightweight Ti-V-Nb-Zrx solid-solution alloys were fabricated by reducing the Zr concentration within the range of 0-5 at% to improve the mechanical properties of equimolar TiVNbZr alloy at elevated temperatures. The fabricated Zrx alloys indeed exhibited greater strength above 800 degrees C than TiVNbZr, but some special mechanical responses occurred at 800 degrees C: (i) superficial cracks with different lengths and amounts along the high-angle grain boundaries (HAGBs) on the compressed sample surface, and (ii) near-brittle fracture of the tensile stress-strain curves. Based on the analysis of the deformed and undeformed surface, local stress concentration and phase transformation were responsible for the cracks and difference in compression behavior, and atmospheric oxygen, deformation localization and phase transformation were mainly responsible for the tensile fracture difference at 800 degrees C. Phase transformation promote stress dispersion, combined with better oxidation resistance, which make the Zr-containing alloys fractured via the transgranular mode in tensile test. In particular, the Zr3 alloy exhibited work hardening and tensile ductility. Based on the tensile and compression properties of the Zrx alloys, it was found that at RT and 600 degrees C, atomic size difference (d) governed alloy strength; from 800 to 1000 degrees C, d and melting temperature (Tm) co-operatively governed alloy strength; at 1200 degrees C, alloy strength was independent of d, but dependent on Tm. The fabricated Ti-V-Nb-Zrx alloys have medium mechanical properties but a small strength loss at high temperatures, and are suitable for various RT deformation processing methods.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据