☆ 4.7 Article

Nanophase transformation and strengthening- Toughening mechanism of the Cu-15Ni-8Sn alloy during aging

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

The localization of plastic deformation in the precipitate free zone of an Al-Mg-Si-Mn alloy

M. Mansouri Arani et al.

Summary: This study quantitatively investigated the strain localization in precipitate free zones (PFZ) of an Al-Mg-Si-Mn alloy using digital image correlation (DIC) and crystal plasticity simulations. The results showed that the thickness of PFZ and the orientation of the grain boundary relative to the loading axis were key factors affecting the level of strain localization.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

The effects of Nb additions on the microstructure evolution in Cu-9Ni-6Sn alloy

Siyang Xu et al.

Summary: By doping Nb in Cu-9Ni-6Sn alloy, the growth of discontinuous precipitation is suppressed, leading to increased lamellar spacing and decreased growth rate of DP.

INTERMETALLICS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A comparative study of Cu-15Ni-8Sn alloy prepared by L-DED and L-PBF: Microstructure and properties

Jibing Wang et al.

Summary: In this paper, dense Cu-15Ni-8Sn alloy blanks were fabricated by laser-directed energy deposition (L-DED). The L-DED sample showed smaller grain size, finer microstructure, and better mechanical properties compared to the laser-powder bed fusion (L-PBF) sample, but with a lower cooling rate.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improving strength and elongation combination of Cu-9Ni-6Sn-(0.2Nb) alloys by pre-annealing and aging treatment

Siyang Xu et al.

Summary: A Cu-9Ni-6Sn-0.2Nb alloy with a good combination of strength and ductility was achieved by adding Nb, pre-annealing, and aging treatment. The grain size was refined and the mechanical properties were optimized through these processes. This study provides insight into improving the comprehensive properties of Cu-Ni-Sn alloys and controlling their microstructure and mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Recrystallization behavior and mechanical properties of a Cu-15Ni-8Sn(P) alloy during prior deformation and aging treatment

Yufan Shi et al.

Summary: The study revealed that cold deformation affects the aging process of Cu-15Ni-8Sn and Cu-15Ni-8Sn-0.2P alloys, with the joint effects of DP and recrystallization leading to mechanical property deterioration, where DP has a more significant impact. The addition of P in the alloy inhibits recrystallization reactions and enhances hardness and yield strength.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical property of Cu-15Ni-8Sn-0.2Nb alloy during aging treatment

Nan Wang et al.

Summary: This study characterized the microstructure evolution of a Cu-15Ni-8Sn-0.2Nb alloy aged at 400 degrees C using transmission electron microscopy, revealing modulated structures, ordering precipitates, and discontinuous precipitation. The coherence between the two ordering phases and matrix resulted in the maximum hardness of the alloy. These findings highlight the importance of aging treatment on structural evolution and mechanical property of Cu-based alloys for extensive engineering applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The formation mechanism, growth, and effect on the mechanical properties of precipitate free zones in the alumina-forming austenitic stainless steel Fe-20Cr-30Ni-2Nb-5Al during creep

Andrew Peterson et al.

Summary: The mechanisms of formation and growth of L12 precipitate-free zones in Fe-20Cr-30Ni-2Nb-5Al austenitic stainless steel during creep were studied. PFZs are formed after the dissolution of L12 precipitates due to depletion of nickel and aluminum, and little growth occurs until grain boundaries are covered by Laves phase and B2 precipitates leading to the depletion of surrounding elements. The presence of micro-cracks in PFZs suggests their weakness in the microstructure and their role as initiation points for fracture.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of P addition on spinodal decomposition and discontinuous precipitation in Cu-15Ni-8Sn alloy

Chengjun Guo et al.

Summary: The microstructure and phase transformations of Cu-15Ni-8Sn alloy can be influenced by a minor addition of phosphorus, resulting in the formation of the hexagonal Ni10SnP3 phase. The addition of phosphorus increases the atomic size factor, promoting spinodal decomposition and ordering in the alloy.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Chemistry, Physical

Suppression of discontinuous precipitation in age-hardening Cu-15Ni-8Sn alloy by addition of V

Zhongkai Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Optimization of strength and ductility in an as-extruded Cu-15Ni-8Sn alloy by the additions of Si and Ti

Chao Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu-15Ni-8Sn alloy

Zhongkai Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inhibition of discontinuous precipitation and enhanced properties of Cu-15Ni-8Sn alloy with Fe addition

Chengjun Guo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cu-Ni-Sn-Si alloys designed by cluster-plus-glue-atom model

Q. X. Yu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Properties of a Cu-Ni-Sn Alloy Treated by Two-Stage Thermomechanical Processing

Yexin Jiang et al.

JOM (2019)

添加到收藏夹

Article Chemistry, Physical

The effect of cold rolling on age hardening of Cu-3Ti-3Ni-0.5Si alloy

Jia Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Environmentally assisted degradation spinodal copper alloy C72900

Roy Johnsen et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Nb addition on the microstructures and mechanical properties of a precipitation hardening Cu-9Ni-6Sn alloy

Minqiang Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and tribological properties of plasma sprayed Cu-15Ni-8Sn coatings

Jin-Kun Xiao et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity

Yaping Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion

Yi Ouyang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

添加到收藏夹

Article Chemistry, Physical

Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium

Chao Zhao et al.

MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural effects on tension behavior of Cu-15Ni-8Sn sheet

Joshua Caris et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoscale characterization of the transfer layer formed during dry sliding of Cu-15 wt.% Ni-8 wt.% Sn bronze alloy

J. B. Singh et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Chemistry, Physical

A new investigation of the system Ni-Sn

Clemens Schmetterer et al.

INTERMETALLICS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.