☆ 4.7 Review

Effect of nanoparticles on creep behaviour of metals: A review

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Deformation mechanism in particulate metal matrix composites

M. Rezayat

Summary: A new approach based on modified stress and strain, combined with micromechanics and dislocation theory, has been developed to study the deformation mechanism in particulate metal matrix composites during hot deformation. The impact of influential processing parameters and reinforcement characteristics were successfully considered in the calculation of deformation activation energy and stress exponent. The developed formulation was validated through investigation of different aluminum matrix particulate composites with varying particle sizes and volume fractions.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and creep behaviour of Zn-10Al alloy with V additives at ambient temperature

Xinyi Liu et al.

Summary: The effect of V alloying on the creep properties of Zn-10Al alloy was investigated, resulting in grain refinement and the observation of a new Al3V phase. The creep resistance was improved by the dispersed Al3V, which pinned dislocations and hindered grain boundary migration.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Synergic effect of Te, Ni and MWCNT on creep behavior and microstructural evolution of Sn-1.0Ag-0.7Cu low-Ag solder

A. A. El-Daly et al.

Summary: In this study, composite solders were developed by incorporating MWCNT, Ni, and Te into SAC107 alloy. The results show that the addition of MWCNT and Cu leads to the formation of core multi-shell particles composed of Te atoms, linking MWCNT with the solder matrix. These structural variations significantly improve the creep resistance and creep life time of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Review on study of internal load transfer in metal matrix composites using diffraction techniques

Pooja Maurya et al.

Summary: This systematic review enhances the understanding of metal matrix composites (MMCs) and their micromechanics by examining different diffraction-based methods of internal load transfer. Internal load transfer is significant in conventional MMCs with high volume fractions of reinforcement particles, and its mechanism depends on various factors. Advanced diffraction-based techniques, such as neutron diffraction and synchrotron X-ray diffraction, have successfully been used to study internal load transfer in MMCs, allowing the measurement of elastic lattice strains and the calculation of phase stress. The information obtained about deformation and damage within the composite material contributes to the overall understanding of MMCs.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of novel 7075 aluminum powders with internally dispersed TiC nanoparticles

Tianqi Zheng et al.

Summary: 7075 aluminum alloy is widely used in the aerospace and defense industries due to its superior mechanical performance. However, it is challenging to manufacture high-strength AA7075 using selective laser melting (SLM) due to issues such as hot cracking and elemental vaporization. In this study, specially designed AA7075 powders containing TiC nanoparticles were successfully printed using SLM, resulting in dense parts with homogeneous microstructures and improved mechanical properties.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Research on high strength and creep behavior of in-situ (Al2O3+ZrB2)/7055 Al nanocomposites

Luyao Huang et al.

Summary: In this study, in-situ Al2O3 and ZrB2 nanoparticles were introduced into 7055 aluminum alloy to achieve high strength, high ductility, and good creep resistance. The nanoparticles were tightly bonded with the aluminum matrix and had orientation relationships with it. The nanoparticles and precipitates showed both promotion and inhibition effects on the recrystallization process. The (Al2O3 + ZrB2)/7055 Al nanocomposites exhibited improved mechanical performance and high-temperature creep resistance compared to the matrix.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of creep resistance of pure magnesium by magnesiothermic reaction with TiO2 nanoparticles

H. Kang et al.

Summary: The creep resistance of magnesium used in automotive powertrain components is a significant mechanical property. Adding metallic oxide particles through a magnesiothermic reaction can effectively enhance creep resistance. The study investigates the influence of MgO nanoparticles produced from decomposed oxygen atoms on the creep resistance in the Mg matrix with embedded TiO2 nanoparticles. The research findings suggest that lattice diffusion may dominate the creep deformation in magnesium, and the nanoparticles formed during creep deformation can suppress Coble creep, even at low temperatures and high stresses.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile and creep properties under different temperature conditions of titanium matrix composites reinforced by TiB and TiC

Yunfei Zheng et al.

Summary: In this paper, the microstructure, tensile properties, and creep behaviors of titanium matrix composites reinforced with different vol% (TiB + TiC) were systematically studied under different temperature conditions. The results showed that the addition of reinforcements improved the mechanical properties of the composites, and the creep mechanism was determined to be dislocation climbing.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

On the current research progress of metallic materials fabricated by laser powder bed fusion process: a review

Walaa Abd-Elaziem et al.

Summary: This article provides a translation of a review on the recent developments in laser powder bed fusion (LPBF) technique, focusing on process parameters, defects, microstructure evolution, metallurgical phenomena, and microselective laser melting processing. It discusses the impact of powder-related and laser-related properties on LPBF process, describes the types, formation mechanisms, and suppression strategies of metallurgical defects in LPBF products, and introduces the microselective laser melting processing for miniaturized part production.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Engineering, Biomedical

Zinc-Based Biodegradable Materials for Orthopaedic Internal Fixation

Yang Liu et al.

Summary: Traditional inert materials used in internal fixation have caused complications and usually need to be removed with secondary surgeries. Biodegradable materials like magnesium, iron, and zinc alloys offer a new solution. Zinc alloys have comparable mechanical properties to traditional metals and a moderate degradation rate, making them a good candidate for internal fixation materials. Research on zinc-based biodegradable materials, including in vitro and in vivo studies, is progressing towards clinical applications in fracture fixation.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synchrotron x-ray diffraction and crystal plasticity modeling study of martensitic transformation, texture development, and stress partitioning in deep-drawn TRIP steels

Peijun Hou et al.

Summary: This study investigated the micromechanics of formability of a lean duplex TRIP steel using S-XRD measurements and CPFEM modeling. It found that the ferrite phase plays a significant role in reducing stress concentrations in the martensite phase, while the austenite texture affects the distribution of the martensite phase. Deep-drawing processes and evaluations of phase fraction, texture, and residual stress distributions revealed that load partitioning to the ferrite phase in duplex TRIP steel leads to significantly reduced tensile hoop residual stresses in the alpha' martensite phase, resulting in improved formability.

MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing mechanical properties of squeeze-cast AZ91 magnesium alloy by combined additions of Sb and SiC nanoparticles

Sourav Ganguly et al.

Summary: The addition of Sb element and Sb+SiC nanoparticles can reduce the grain size and decrease the β-Mg17Al12 phase in the AZ91 alloy, leading to improved compression properties and creep resistance.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Micromechanics and indentation creep of magnesium carbon nanotube nanocomposites: 298 K-573 K

J. Thornby et al.

Summary: This study investigated the time-dependent plastic deformation (creep) response of magnesium/CNT nanocomposites containing 0.25, 0.5, and 0.75 vol% of CNTs. Mg reinforced with 0.25-0.5 vol% CNTs showed the best creep resistance. Multiple creep mechanisms were identified at elevated temperatures, with diffusion creep mechanisms expected to prevail when temperatures exceed 573 K. These materials have promising applications in aerospace, automotive, military, and other industrial fields.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of stress and temperature on creep behavior of a (TiB + TiC + Y2O3)/ α-Ti composite

Lijuan Xu et al.

Summary: The microstructure evolution, high temperature tensile properties, and creep behavior of TiB, TiC, and Y2O3/α-Ti composite were investigated. It was found that reinforcements could effectively impede the movement of dislocations and improve the creep resistance. The dominant mechanism of creep process was dislocation climbing at both 650 degrees C and 700 degrees C.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanisms of creep deformation in a rapidly solidified Al-Fe-V-Si alloy

M. Zhang et al.

Summary: Creep experiments on a rapidly solidified Al-8.5 wt% Fe-1.3 wt% V-1.7 wt% Si alloy suggest that it exhibits similar or superior deformation resistance compared to other high temperature Al alloys. Stress reduction results show that FVS0812 exhibits similar creep characteristics to those of other dispersion-strengthened alloys under constant structure conditions following stress reductions, even though the creep mechanism is determined to be significantly different. The role of the particles is to carry a portion of the applied load rather than causing dislocation detachment, local climb, or general climb.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

First-principles calculations of diffusion activation energies for designing anti-self-aging biodegradable zinc alloys

Shihao Fan et al.

Summary: This study investigates lattice diffusion in Zn alloys by calculating activation energies, finding a strong correlation between activation energy and solute atom size and d-electron number. The trend to improve thermostability using the Nabarro-Herring model is predicted, and the results are verified with an anti-self-aging Zn-Cu alloy preparation experiment.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoparticles Enabled Mechanism for Hot Cracking Elimination in Aluminum Alloys

Maximilian Sokoluk et al.

Summary: By incorporating TiC and TiB2 nanoparticles into hot crack susceptible aluminum alloys 7075, 6061, and 2024, it was found that the principal mechanism of hot cracking elimination is attributed to the unusual modification of both grains and intermetallic phases, as well as a higher liquid fraction at the final stage of solidification.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of nano-Y2O3 addition on the creep behavior of an as-cast near-α titanium alloy

Zhuangzhuang Zheng et al.

Summary: This study discussed the influence of nano-Y2O3 addition on the creep properties and fracture behavior of an as-cast near-alpha titanium alloy, showing that Y2O3 addition can increase creep life and reduce stress concentration of alpha/beta boundaries. Additionally, Y2O3 plays a role in dislocation strengthening and load transfer strengthening, demonstrating a positive effect on creep resistance. The fracture mechanism involves voids nucleation and crack formation due to Y2O3 particles, interface debonding, and grain boundaries deformation.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superplastic behavior of an in-situ TiB2 particle reinforced aluminum matrix composite processed by elliptical cross-section torsion extrusion

Shilin Zhao et al.

Summary: In this study, a severe plastic deformation method, E-TE, was used to achieve superplasticity in an in-situ TiB2/Al-Zn-Mg-Cu composite by optimizing the microstructure. Tensile tests revealed that the composite showed excellent superplastic behavior at specific temperatures and strain rates, achieving elongations up to 420%. The deformation and failure mechanisms of the composite varied with temperature, with different mechanisms observed at different temperature ranges.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High performance carbon nanotube-reinforced magnesium nanocomposite

Yunpeng Ding et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of (B4C+Al2O3)/Al composites designed for neutron absorbing materials with both structural and functional usages

Y. N. Zan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure, mechanical properties and creep behaviour of extruded Zn-xLi (x=0.1, 0.3 and 0.4) alloys for biodegradable vascular

Suming Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Haiping Jia et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of heat treatment on the microstructural evolution and creep resistance of Elektron21 alloy and its nanocomposite

Hong Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructure evolution and deformation mechanisms of β phase in TiBw/Ti60 composites studied by reconstructing grain during the hot deformation

H. B. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Welding and additive manufacturing with nanoparticle-enhanced aluminum 7075 wire

Daniel Oropeza et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffraction

X. X. Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep behavior of high-pressure die-cast AlSi10MnMg aluminum alloy

Cheolmin Ahn et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and characterization of bioresorbable zinc/WC nanocomposite springs for short bowel syndrome treatment

Jasmine Li et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High strength and high creep resistant ZrB2/Al nanocomposites fabricated by ultrasonic-chemical in-situ reaction

Xizhou Kai et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing the creep resistance of AlN/Al nanoparticles reinforced Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy by a high shear dispersion technique

Hong Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep properties of biodegradable Zn-0.1Li alloy at human body temperature: implications for its durability as stents

Suming Zhu et al.

MATERIALS RESEARCH LETTERS (2019)

添加到收藏夹

Review Engineering, Biomedical

Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility

Guannan Li et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Significantly enhancing the strength plus ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes

Jiangtao Hou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Microstructure Control and Performance Evolution of Aluminum Alloy 7075 by Nano-Treating

Min Zuo et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Magnesium nanocomposites: An overview on time-dependent plastic (creep) deformation

M. Haghshenas et al.

DEFENCE TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Hot deformation behavior of in-situ nanosized TiB2 particulate reinforced AZ91 Mg matrix composite

Peng Xiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure Evolution and Improved Creep Behavior of Mg-Al-Si Alloy Matrix Composite Reinforced with SiC Nanoparticles

Ming Li et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constructing two-scale network microstructure with nano-Ti5Si3 for superhigh creep resistance

Y. Jiao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep properties and failure mechanisms of aluminum alloy and aluminum matrix silicon oxide nano-composite under working conditions in engine pistons

Mohammad Azadi et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Bulk ultrafine grained/nanocrystalline metals via slow cooling

Chezheng Cao et al.

SCIENCE ADVANCES (2019)

添加到收藏夹

Article Automation & Control Systems

Ambient and non-ambient temperature depth-sensing indentation of Mg-Sm2O3 nanocomposites

M. Haghshenas et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Self-hardening of low-alloyed zinc for biodegradable application

Krzysztof Piela et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Composites

Depth sensing indentation of magnesium/boron nitride nanocomposites

M. Haghshenas et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Microstructure evolution and tensile creep behavior of Sn-0.7Cu lead-free solder reinforced with ZnO nanoparticles

A. F. Abd El-Rehim et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075

Maximilian Sokoluk et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Indentation-based characterization of creep and hardness behavior of magnesium carbon nanotube nanocomposites at room temperature

J. Thornby et al.

SN APPLIED SCIENCES (2019)

添加到收藏夹

Article Engineering, Manufacturing

A new model for the description of creep behaviour of aluminium-based composites reinforced with nanosized particles

Stefano Spigarelli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of SiC nanoparticleS addition on microstructure and creep behavior of squeeze-cast AZ91-Ca-Sb magnesium alloy

Sourav Ganguly et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced elevated-temperature mechanical properties of Al-Mn-Mg containing TiC nano-particles by pre-strain and concurrent precipitation

Qinglong Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Impression creep behaviour of ultrasonically processed in-situ Al3Ti reinforced aluminium composite

Rahul Gupta et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep Properties of Squeeze-Infiltrated Carbon Nanotube and Aluminum Borate Whisker Reinforced AS52 Mg Metal Matrix Composites

Sang Hyun Park et al.

METALS AND MATERIALS INTERNATIONAL (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

An Overview of Key Challenges in the Fabrication of Metal Matrix Nanocomposites Reinforced by Graphene Nanoplatelets

Abdollah Saboori et al.

METALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superior creep resistance of 0.3 wt% nano-sized TiCp/Al-Cu composite

Wei-Si Tian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy

Xiongxiong Gao et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Chemistry, Physical

Effect of Solution Treatment on Precipitation Behaviors, Age Hardening Response and Creep Properties of Elektron21 Alloy Reinforced by AlN Nanoparticles

Abdollah Saboori et al.

MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of AZ91 alloy reinforced by carbon nanotubes coated with MgO

Qiu-hong Yuan et al.

CARBON (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy

A. K. S. Bankoti et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring

Lydia Katsarou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

High Strength Magnesium Alloys Through Precipitation Hardening and Micro Alloying: Considerations for Alloy Design

C. L. Mendis et al.

JOM (2015)

添加到收藏夹

Article Chemistry, Physical

Creep behavior and wear resistance of Al 5083 based hybrid composites reinforced with carbon nanotubes (CNTs) and boron carbide (B4C)

Ali Alizadeh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Magnesium-based nanocomposites: Lightweight materials of the future

M. Gupta et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synthesis and characterization of high performance low volume fraction TiC reinforced Mg nanocomposites targeting biocompatible/structural applications

Ganesh Kumar Meenashisundaram et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Microstructure, Tensile Properties, and Creep Resistance

Suming Zhu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamics-Based Selection and Design of Creep-Resistant Cast Mg Alloys

Saeideh Abaspour et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles

Lian-Yi Chen et al.

NATURE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced ductility of Mg-3Al-1Zn alloy reinforced with short length multi-walled carbon nanotubes using a powder metallurgy method

Muhammad Rashad et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced ductility of Mg-3Al-1Zn alloy reinforced with short length multi-walled carbon nanotubes using a powder metallurgy method

Muhammad Rashad et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Manufacturing

High-temperature deformation behavior of carbon nanotube (CNT)-reinforced aluminum composites and prediction of their high-temperature strength

W. J. Kim et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites

Mui Hoon Nai et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural characterization and creep resistance of nano-silicon carbide reinforced Sn-1.0Ag-0.5Cu lead-free solder alloy

A. A. El-Daly et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of aging on the tensile properties and microstructures of a near-alpha titanium alloy

Weiju Jia et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep behavior of AS41 alloy matrix nano-composites

Harish Kumar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep Properties in TiO2 Nanoparticle Reinforced Aluminum Matrix Composites

Jaehyuck Shin et al.

ADVANCED ENGINEERING MATERIALS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents

Patrick K. Bowen et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

In situ synthesis of CNTs in Mg powder at low temperature for fabricating reinforced Mg composites

Fujun Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Creep Behavior of AZ91 Magnesium Alloy

A. Srinivasan et al.

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys

Christopher Booth-Morrison et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep and microstructure in powder metallurgy 15 vol.% SiCp-2009 Al composite

Zhigang Lin et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Novel Fe-containing Sn-1Ag-0.5Cu lead-free solder alloy with further enhanced elastic compliance and plastic energy dissipation ability for mobile products

Dhafer Abdul-Ameer Shnawah et al.

MICROELECTRONICS RELIABILITY (2012)

添加到收藏夹

Article Chemistry, Physical

Development of new magnesium based alloys and their nanocomposites

Md Ershadul Alam et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influence of thermomechanical processing on microstructural evolution of Ti600 titanium alloy

Yuanfei Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

Microstructure, thermal analysis and hardness of a Sn-Ag-Cu-1 wt% nano-TiO2 composite solder on flexible ball grid array substrates

Asit Kumar Gain et al.

MICROELECTRONICS RELIABILITY (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep properties of aluminum-based composite containing multi-walled carbon nanotubes

H. J. Choi et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Engineering, Biomedical

Synchrotron X-ray diffraction study of load partitioning during elastic deformation of bovine dentin

A. C. Deymier-Black et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep behavior of hot extruded Al-Al2O3 nanocomposite powder

A. Hosseini Monazzah et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep and thermomechanical fatigue properties of in situ Cu6Sn5 reinforced lead-free composite solder

F. Tai et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Load partitioning in Al2O3-Al composites with three-dimensional periodic architecture

M. L. Young et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Materials Science, Composites

Creep behaviors and stress regions of hybrid reinforced high temperature titanium matrix composite

Lv Xiao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Physical

Strengthening mechanism of SiC-particulate reinforced Sn-3.7Ag-0.9Zn lead-free solder

X. Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep behavior of in situ TiCP/2618 aluminum matrix composite

F. Ji et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Intragranular Deformation Mechanisms during Ambient-Temperature Creep in Hexagonal Close-Packed Metals

Tetsuya Matsunaga et al.

MATERIALS TRANSACTIONS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep Behavior of In-Situ Formed AlN Reinforced Mg-5Al Nanocomposite at Low Temperatures and Low Stresses

Maung Aye Thein et al.

NANOSCIENCE AND NANOTECHNOLOGY LETTERS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Threshold stress and load partitioning during creep of metal matrix composites

Ricardo Fernandez et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Chemistry, Physical

Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates

Q. B. Nguyen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of SiC nanoparticle additions on microstructure and microhardness of Sn-Ag-Cu solder alloy

Ping Liu et al.

JOURNAL OF ELECTRONIC MATERIALS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites

Z. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Creep properties of composite solders reinforced with nano- and microsized particles

Yaowu Shi et al.

JOURNAL OF ELECTRONIC MATERIALS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7 pct Al alloy

R. S. Kottada et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel

M. L. Young et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation of in situ TiCP/LY12 composite and its microstructure and mechanical properties

X. W. Zeng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep behavior of nanostructured Mg alloy at ambient and low temperature

B. W. Chua et al.

MATERIALS RESEARCH BULLETIN (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Load sharing in tungsten fiber reinforced Kanthal composites

B Clausen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength

Z Zhang et al.

SCRIPTA MATERIALIA (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Compression creep of PM aluminum matrix composites reinforced with SiC short fibres

MF Moreno et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep deformation mechanisms in high-pressure die-cast magnesium-aluminum-base alloys

W Blum et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Residual stresses and stress partitioning measurements by neutron diffraction in Al/Al-Cu-Fe composites

F Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading

JC Haran et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Review Materials Science, Composites

Nanocomposites in context

ET Thostenson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation behavior of a modified 5083 aluminum alloy

R Kaibyshev et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites

R Sinclair et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Assessment of back stress and load transfer approaches for rationalizing creep of short fiber reinforced aluminum alloys

A Yawny et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Accelerated coarsening of precipitates in crept Al-Cu alloys

T Nakajima et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Progress in structural materials for aerospace systems

JC Williams et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

An objective study of substructural boundary alignment in aluminium

PJ Hurley et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

An investigation on the microstructure of an AM50 magnesium alloy

RM Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures and dislocations in the stressed AZ91D magnesium alloys

RM Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Engineering, Multidisciplinary

Some aspects of damage and failure mechanisms at high strain-rate and elevated temperatures of particulate magnesium matrix composites

YES Essa et al.

COMPOSITES PART B-ENGINEERING (2003)

添加到收藏夹

Review Materials Science, Multidisciplinary

Creep resistant magnesium alloys for powertrain applications

MO Pekguleryuz et al.

ADVANCED ENGINEERING MATERIALS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature creep behavior of TiC particulate reinforced Ti-6Al-4V alloy composite

ZY Ma et al.

ACTA MATERIALIA (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys

DN Seidman et al.

ACTA MATERIALIA (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anomalous creep in Sn-rich solder joints

HG Song et al.

MATERIALS TRANSACTIONS (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

A neutron diffraction study of creep and damage occurrence in an A359/SiC composite

A Madgwick et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep and substructure in 5 vol.% SiC-2124 Al composite

ZG Lin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

添加到收藏夹

Article Engineering, Electrical & Electronic

Creep behavior of eutectic Sn-Cu lead-free solder alloy

CML Wu et al.

JOURNAL OF ELECTRONIC MATERIALS (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep properties of an Al-2024 composite reinforced with SiC particulates

S Spigarelli et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep behaviour and creep microstructures of a high-temperature titanium alloy Ti-5.8Al-4.0Sn-3.5Zr-0.7Nb-0.35Si-0.06C (Timetal 834) - Part 1. Primary and steady-state creep

M Es-Souni

MATERIALS CHARACTERIZATION (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep of magnesium strengthened with high volume fractions of yttria dispersoids

BQ Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

Magnesium strengthened by SiC nanoparticles

H Ferkel et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

A synchrotron X-ray study of a Ti/SiCf composite during in situ straining

E Maire et al.

ACTA MATERIALIA (2001)

添加到收藏夹

Article Materials Science, Composites

Creep deformation characteristics of discontinuously reinforced aluminium-matrix composites

ZY Ma et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

An investigation of the isothermal creep response of Al-based composites by neutron diffraction

HMA Winand et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.