☆ 4.5 Article

Microstructure and properties of magnetic field assisted laser wire-filled welded 22MnB5 steel joints

MATERIALS RESEARCH EXPRESS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Laser welding of tailored blanks made of Al-Si-coated 22MnB5 steel using a filler wire and a variable energy distribution laser optics

Donato Coviello et al.

Summary: Laser welding of Al-Si-coated steels for hot stamping in automotive applications is problematic due to the mixing of the coating layers inside the molten pool that weakens the resulting weld seam. In this work, a novel approach consisting in joining as-received materials using a filler wire and an innovative variable energy distribution laser optics is introduced and tested on tailor welded blanks made of 22MnB5. The results show that this method can achieve higher tensile strength and hardness compared to traditional methods.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct laser-filler wire welding of Al-Si coated 22MnB5 steel without removing the Al-Si coating

Wei Xu et al.

Summary: A patented laser-filler wire welding process was developed to inhibit the formation of a-ferrite and achieve high quality laser weld in Al-Si coated 22MnB5 steels without removing the coating. The use of a designated filler wire reduced Al segregation and resulted in a microstructure of full martensite with high dislocation density. The tensile strength and elongation of the welded joint increased significantly compared to welding without a filler wire.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Review Optics

A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing

Amirhossein Sadeghian et al.

Summary: Laser welding is considered an ideal choice for EV battery manufacturing due to its non-contact nature and precise control over heat input, but the incompatible thermos-physical properties of dissimilar materials pose a significant challenge for achieving complete metallurgical bond. This paper reviews the fundamental difficulties and latest developments in dissimilar laser welding of various materials in EV battery pack manufacturing, discussing weld microstructure, common metallurgical defects, and joint properties.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Single-Pass Full Penetration Laser Welding of 10-mm-Thick EH40 Using External Magnetic Field

R. L. Wu et al.

Summary: This paper proposes a method of high-strength steel thick plate welding by coupling external magnetic field and single-pass full penetration laser welding, and investigates the effect of static magnetic field on the microstructure and mechanical properties of the welded joint. The results show that the appropriate magnetic field can effectively suppress periodic root humps and drop-out, and improve the mechanical properties of the welded joint.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

EBSD study on magnetic field altering crystal texture and grain growth during laser-hybrid welding

Chang Hu et al.

Summary: In this study, the evolution of microstructures and performance variations during laser-arc welding of 316L austenitic stainless steel were analyzed under the influence of a magnetic field. The magnetic field was found to refine austenite grains, suppress ferrite dendrite growth, and enhance the tensile strength of the material. The current, supercooling, and electromagnetic stirring were also investigated at different magnetic intensities, showing different effects on the microstructure evolution.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Filler Wire on Laser Lap Welding of Al-Si Coated 22MnB5 Hot Stamping Steel

Feng Zhao et al.

Summary: By using laser lap welding with filler wire, the accumulation of delta-ferrite can be suppressed and the dilution of the Al-Si coating can be adjusted, resulting in improved weld appearance and mechanical properties.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Automation & Control Systems

Influence of the magnetic field on the melting and solidification behavior of narrow-gap laser welding with filler wire

Juan Fu et al.

Summary: This study investigated the impact of magnetic induction intensity on the distribution of plasma electron temperature and the behavior of the molten pool flow. The results showed that as the magnetic induction intensity increased, the high-temperature center region of the plasma expanded and the electron temperature increased from the bottom to the edge of the groove. The magnetic field had a stirring effect on the molten pool, and certain magnetic field intensities resulted in a more uniform and stable flow of the pool.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Effect of welding speed on microstructure and mechanical behavior of laser welded Al-Si coated 22MnB5 steel

Wei Xu et al.

Summary: The effect of Al-Si coating on the weld bead formation, aluminum element distribution, microstructure, and mechanical properties of laser welded 22MnB5 steel joint was studied. It was found that increasing welding speed helped to reduce the concavity depth of the weld surface. The uneven distribution of aluminum element in the fusion zone during welding process resulted in softened weld and reduced hardness.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Status and Development Trend of Laser Welding Technology for Automotive Body

Wang Yu et al.

Summary: The automobile industry is a crucial pillar industry for national economic development, heavily invested in high-tech and high-end equipment. The quality of automobiles, including their welding process, directly affects safety. Laser welding technology has gained popularity in recent years due to its advantages of high energy density, fast welding speed, low deformation, and good flexibility.

CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Significant Impact of the Characteristics of Granular Structure and Granular Bainite on the Mechanisms Contributing to Strength-Ductility Combination

X. N. Xu et al.

Summary: The study conducted a comprehensive analysis of granular structure (GS) and granular bainite (GB) in low-carbon alloy steel to elucidate their contribution to strength-ductility combination. It was found that specimens with GB exhibited higher tensile strength, ductility, and strain hardening compared to GS, with more apparent dislocation strengthening in GB and a higher volume fraction of M-A islands contributing to its strength. The improvement in ductility in GB may partly be attributed to sub-structural refinement and the presence of geometrically necessary dislocations array.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of external applied magnetic field on microstructures and mechanical properties of laser welding joint of medium-Mn nanostructured steel

R. Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Laser Beam Offset and Filler Wire on Laser Lap-Fillet Welding of Al-Si-Coated 22MnB5 Steel

Youqiong Qin et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Thermo-electromagnetic effect on weld microstructure in magnetically assisted laser welding of austenite steel

Xin Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Materials for Automotive Lightweighting

Alan Taub et al.

Annual Review of Materials Research (2019)

添加到收藏夹

Article Engineering, Industrial

Effect of welding parameters on microstructure and mechanical properties of laser welded Al-Si coated 22MnB5 hot stamping steel

Xi He et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring

Xiangmeng Meng et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Thermodynamics

Influence of the external magnetic field on fluid flow, temperature profile and humping bead in high speed gas metal arc welding

Lin Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Mechanics

A coupled phase field/diffusion model for upper and lower bainitic transformation

Martin Duesing et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Industrial

Magnetism aided mitigation of deformation and residual stress in dissimilar joint 316L with EH36

Youmin Rong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Effect of filler wire on laser welded blanks of Al-Si-coated 22MnB5 steel

Wenhu Lin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influences of hot stamping parameters on mechanical properties and microstructure of 30MnB5 and 22MnB5 quenched in flat die

Mu Yan-hong et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2018)

添加到收藏夹

Review Automation & Control Systems

Review on magnetically controlled arc welding process

Hong Wu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Optics

Three-dimensional transient thermoelectric currents in deep penetration laser welding of austenite stainless steel

Xin Chen et al.

OPTICS AND LASERS IN ENGINEERING (2017)

添加到收藏夹

Article Engineering, Industrial

Laser beam welding of aluminum to Al-base coated high-strength steel 22MnB5

M. Windmann et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of axial external magnetic field on cold metal transfer welds of aluminum alloy and stainless steel

Yibo Liu et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of a weak transverse magnetic field on solidification structure during directional solidification

X. Li et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Austenite grain growth modelling in weld heat affected zone of Nb/Ti microalloyed linepipe steel

G. Khalaj et al.

MATERIALS SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Thermodynamics

About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts

Marcel Bachmann et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Modeling the correlation between yield strength, chemical composition and ultimate tensile strength of X70 pipeline steels by means of gene expression programming

Gholamreza Khalaj et al.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2013)

添加到收藏夹

Article Computer Science, Artificial Intelligence

ANN-based prediction of ferrite fraction in continuous cooling of microalloyed steels

Gholamreza Khalaj et al.

NEURAL COMPUTING & APPLICATIONS (2013)

添加到收藏夹

Article Computer Science, Artificial Intelligence

PREDICTION OF MARTENSITE FRACTION OF MICROALLOYED STEEL BY ARTIFICIAL NEURAL NETWORKS

Gholamreza Khalaj et al.

NEURAL NETWORK WORLD (2013)

添加到收藏夹

Article Chemistry, Physical

Formation mechanism of granular bainite in a 30CrNi3MoV steel

Z. X. Qiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.