☆ 4.6 Article

Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis

JOURNAL OF MANUFACTURING PROCESSES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Effect of droplet transition on the dynamic behavior of the keyhole during 6061 aluminum alloy laser-MIG hybrid welding

Yue Li et al.

Summary: The simulation method in laser-MIG hybrid welding reveals the complex physical phenomena and dynamic behavior of the molten pool keyhole. The experimental results show that the droplet transition behavior affects the formation of the keyhole, with the smallest keyhole formed when the droplet comes into contact with the molten pool. Additionally, droplet transition brings external momentum and energy to the molten pool, contributing to an increase in the flow rate of the molten pool.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Minimizing defects and controlling the morphology of laser welded aluminum alloys using power modulation-based laser beam oscillation

Jing Han et al.

Summary: This study investigates the use of Full Domain Power Modulation (FDPM) system in laser welding of aluminum alloys. It is found that the Gradient Power (GP) mode produces welds with the lowest porosity and the largest equiaxed crystal ratio. The strong stirring effect in GP mode helps remove pores and improve the microstructure of the molten pool.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Optics

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Wenchao Ke et al.

Summary: This paper presents a numerical framework and methods to suppress porosity formation in laser beam oscillating welding. The study found that porosity decreased and was fully inhibited when using an infinity-oscillating path with a frequency of 200 Hz. The developed multi-physics model aids in understanding keyhole-induced porosity formation during laser beam oscillating welding of 5A06 aluminum alloy.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Optics

Adjustable Ring Mode (ARM) laser welding of stainless steels

Lin Wang et al.

Summary: The adjustable ring mode (ARM) laser, combining annular and gaussian laser beams, shows promising potential for stabilizing laser-based welding processes. Experimental investigation of laser-material processing under different laser modes revealed varying effects on keyhole entrance characteristics and fusion efficiency. Plasma intensity was found to have a positive relationship with keyhole geometry in different shaped laser beam welding, impacting fusion efficiency across weld cross-sections.

OPTICS AND LASERS IN ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of laser oscillating frequency on energy distribution, molten pool morphology and grain structure of AA6061/AA5182 aluminum alloys lap welding

Lin Chen et al.

Summary: This paper investigated lap welding of 1.5 mm AA6061 and AA5182 aluminum alloy sheets with laser beam circular oscillation. The effects of oscillating frequency on weld formation, grain structure, and mechanical properties were studied through experiments and numerical simulations. Increasing frequency led to changes in heat input, energy distribution, and keyhole depth, affecting the molten pool shape, grain size, and internal hardness distribution in the weld.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Optics

Optimization of weld strength for laser welding of steel to PMMA using Taguchi design method

Yijie Huang et al.

Summary: The dissimilar joining of 304 stainless steel to PMMA was achieved using a Nd:YAG pulsed laser, with optimized welding parameters leading to a maximum weld strength of 974N. Various bead profiles and fracture models were proposed based on the experimental results.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Lin Shi et al.

Summary: By investigating the suppression mechanism of keyhole-induced porosity in oscillating laser beam welding through numerical simulation and experimental verification, it was found that controlling the energy balance of the keyhole and melt pool can effectively reduce the weld porosity of 304 stainless steel. Additionally, two mechanisms were identified for porosity suppression: the stirring effect of the oscillating beam and the timely absorption of bubbles by the dynamic keyhole.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Review Automation & Control Systems

Research and prospect of welding monitoring technology based on machine vision

Xi'an Fan et al.

Summary: This paper outlines the technical points of welding status monitoring based on machine vision, which includes hardware and software, as well as image processing techniques. It also discusses intelligent models and optimization methods for recognition and classification in visual monitoring, along with potential research challenges and future research opportunities in welding visual monitoring.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Effects of energy density attenuation on the stability of keyhole and molten pool during deep penetration laser welding process: A combined numerical and experimental study

Yilin Wang et al.

Summary: This study investigates the influence of energy density attenuation on the welding process using innovative characterizing methods and a multiphase model. It reveals the phenomenon of alternate melting between the keyhole wall and bottom due to energy density attenuation, as well as its correlation with molten pool fluctuations. Regulating the movement of protrusions can improve molten pool stability. Adjusting beam defocus and inclination is proposed as an optimization method to enhance welding stability.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Optics

Monitoring of keyhole entrance and molten pool with quality analysis during adjustable ring mode laser welding

Lin Wang et al.

APPLIED OPTICS (2020)

添加到收藏夹

Article Engineering, Manufacturing

A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties

Shangren Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of circular oscillating beam on heat transfer and melt flow of laser melting pool

Chen Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Manufacturing

Weld formation mechanism of fiber laser oscillating welding of dissimilar aluminum alloys

Cong Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Thermodynamics

Sinusoidal oscillating laser welding of 7075 aluminum alloy: Hydrodynamics, porosity formation and optimization

Tongtong Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism study on the effects of power modulation on energy coupling efficiency in infrared laser welding of highly-reflective materials

Jie Ning et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Data-Driven Detection of Laser Welding Defects Based on Real-Time Spectrometer Signals

Yanxi Zhang et al.

IEEE SENSORS JOURNAL (2019)

添加到收藏夹

Article Engineering, Industrial

Correlation analysis of penetration based on keyhole and plasma plume in laser welding

Yi Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Numerical study of keyhole instability and porosity formation mechanism in laser welding of aluminum alloy and steel

Lijin Huang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Effect of magnesium content on keyhole-induced porosity formation and distribution in aluminum alloys laser welding

Lijin Huang et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Thermodynamics

Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys

Runqi Lin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Automation & Control Systems

Modulated fiber laser welding of high reflective AZ31

Lin-Jie Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Review Engineering, Manufacturing

Problems and issues in laser beam welding of aluminum-lithium alloys

Rongshi Xiao et al.

JOURNAL OF MANUFACTURING PROCESSES (2014)

添加到收藏夹

Article Physics, Applied

Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding

Haiyan Zhao et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)

添加到收藏夹

Article Physics, Applied

Melt pool and keyhole behaviour analysis for deep penetration laser welding

R. Fabbro

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

添加到收藏夹

Review Materials Science, Multidisciplinary

Problems and issues in laser-arc hybrid welding

B. Ribic et al.

INTERNATIONAL MATERIALS REVIEWS (2009)

添加到收藏夹

Article Physics, Applied

Modelling of gas jet effect on the melt pool movements during deep penetration laser welding

E. H. Amara et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Suppression of porosity in beam weaving laser welding

X Zhang et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Marangoni effect in laser deep penetration welding of steel

T Fuhrich et al.

JOURNAL OF LASER APPLICATIONS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.