☆ 4.7 Article

Voltage/Current Doubler Converter for Electric Vehicle Wireless Charging Employing Bipolar Pads

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Voltage/Current Doubler Converter for an Efficient Wireless Charging of Electric Vehicles With 400-V and 800-V Battery Voltages

Francesca Grazian et al.

Summary: This article proposes a wireless charging system that efficiently charges electric vehicles (EVs) with either 400V or 800V batteries at the same power level. The system only uses passive semiconductor devices on board the EV and consists of two sets of series-compensated coupled coils and dedicated H-bridge converters. The power transfer efficiency of the system is compared to a conventional one-to-one coil system at a power level of 7.2 kW, resulting in dc-to-dc efficiencies of 97.11% and 97.52% for 400V and 800V voltage outputs, respectively. The functionality of the V/I-D converter is proven for both even and uneven misalignments of the coupled coils.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2023)

添加到收藏夹

Article Automation & Control Systems

New Combined OBC and LDC System for Electric Vehicles With 800 V Battery

Dae-Woo Lee et al.

Summary: This article proposes a new vehicle charging system (VCS) that combines an on-board charger (OBC) and a low-voltage dc-dc converter (LDC) for electric vehicles with an 800 V battery system. The proposed VCS improves power density by integrating transformers and components, and reduces voltage to limit high voltage generated.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

添加到收藏夹

Article Automation & Control Systems

A Wireless Power Transfer System With Inverse Coupled Current Doubler Rectifier for High-Output Current Applications

Lixin Shi et al.

Summary: This article proposes a series-series wireless power transfer system combined with an inverse coupled current doubler rectifier, which is suitable for high-current applications. It provides a comprehensive comparison between the proposed system and the traditional WPT system with a full-bridge rectifier, highlighting the advantages of the proposed system in terms of volume reduction, overall efficiency, and power density.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Family of Hybrid IPT Couplers With High Tolerance to Pad Misalignment

Wei Zhao et al.

Summary: This article proposes a family of hybrid IPT couplers that can achieve high tolerance to magnetic pad misalignments and are applicable to all IPT compensation topologies. In addition, the design principles for hybrid couplers with different coil winding polarities are provided. Finally, a 3-kW IPT prototype is built to verify the analytical findings.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Charging Electric Vehicle Batteries: Wired and Wireless Power Transfer Exploring EV charging technologies

Hua (Kevin) Bai et al.

IEEE POWER ELECTRONICS MAGAZINE (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Si MOSFET-Based High-Power Wireless EV Charger With a Wide ZVS Operating Range

Wenwei Victor Wang et al.

Summary: This article proposes a new digitized modulation scheme suitable for high-power wireless electric vehicle chargers, focusing on steady-state operating principles and practical considerations. The proposed scheme achieves zero voltage switching and efficiently regulates power transfer over a wide load and coupling range. The system maintains an efficiency of 90% to 93% when controlling power transfer at 7.7 kW under varying coupling factors and battery voltages.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

800-V Electric Vehicle Powertrains: Review and Analysis of Benefits, Challenges, and Future Trends

Iman Aghabali et al.

Summary: The adoption of 800-V battery electric vehicles (BEVs) can lead to higher charging rates, but also requires careful consideration for the design of all electrical systems. This article reviews the current state of 800-V vehicle powertrain electrical design and discusses the benefits, challenges, and future trends associated with multiple vehicle powertrain components.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Decoupling Circuit for Automated Guided Vehicles IPT Charging Systems With Dual Receivers

Ruikun Mai et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Joint Control With Variable ZVS Angles for Dynamic Efficiency Optimization in Wireless Power Transfer System

Yongbin Jiang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Integrated Boost Active Bridge Based Secondary Inductive Power Transfer Converter

Gaurav R. Kalra et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Alternative IPT Pickup Controller for Material Handling Using a Current Doubler

Hui Zhi (Zak) Beh et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Analysis and Transmitter Currents Decomposition Based Control for Multiple Overlapped Transmitters Based WPT Systems Considering Cross Couplings

Yong Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Novel Integration Method for a Bipolar Receiver Pad Using LCC Compensation Topology for Wireless Power Transfer

Navid Rasekh et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Leakage Flux Control of Mismatched IPT Systems

Fei Yang Lin et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Power Up with 800-V Systems The benefits of upgrading voltage power for battery-electric passenger vehicles

Christian Jung

IEEE ELECTRIFICATION MAGAZINE (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Comparison Study on SS and Double-Sided LCC Compensation Topologies for EV/PHEV Wireless Chargers

Weihan Li et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2016)

添加到收藏夹

Article Automation & Control Systems

Integrated LCC Compensation Topology for Wireless Charger in Electric and Plug-in Electric Vehicles

Weihan Li et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigation of Multiple Decoupled Coil Primary Pad Topologies in Lumped IPT Systems for Interoperable Electric Vehicle Charging

Adeel Zaheer et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Evaluation of Magnetic Pad Sizes and Topologies for Electric Vehicle Charging

Fei Yang Lin et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

添加到收藏夹

Article Automation & Control Systems

A Bipolar Pad in a 10-kHz 300-W Distributed IPT System for AGV Applications

Adeel Zaheer et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2014)

添加到收藏夹

Article Automation & Control Systems

Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems

Mickel Budhia et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Analysis and Implementation of an Improved Current-Doubler Rectifier With Coupled Inductors

Tsai-Fu Wu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.