☆ 4.6 Article

Urethane dimethacrylate-based photopolymerizable resins for stereolithography 3D printing: A physicochemical characterisation and biocompatibility evaluation

DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Effect of Different Vat Polymerization Techniques on Mechanical and Biological Properties of 3D-Printed Denture Base

Hao-Ern Lee et al.

Summary: Three-dimensional printing is increasingly used in dentistry to fabricate denture bases. This study examined the effects of different vat polymerization techniques on the mechanical and biological properties of 3D-printed denture bases made from NextDent denture base resin. The results showed that SLA had the highest flexural strength, while DLP and LCD had higher water sorption and solubility. The study confirmed that NextDent denture base resin designed for DLP can be printed using different vat polymerization techniques.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

Stereolithography of (meth)acrylate-based photocurable resin: Thermal and mechanical properties

Nader Zirak et al.

Summary: This study investigates the effects of different sub-build orientations on the thermal and mechanical properties of acrylate-based 3D printing SLA rapid-prototyping photosensitive resin during UV and thermal post-curing. Polymerization is shown to play a key role in determining the final mechanical and thermal properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Stereolithography-assisted fabrication of 3D printed polymeric film for topical berberine delivery: in-vitro, ex-vivo and in-vivo investigations

Dinesh Choudhury et al.

Summary: The development of 3D printed polymeric film for topical delivery of berberine (BBR) using stereolithography (SLA) was successful in enhancing local concentrations. The presence of PEG 400 facilitated BBR solubilization and permeation, leading to effective diffusion and non-irritant properties in in-vitro and in-vivo studies.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2022)

添加到收藏夹

Article Thermodynamics

A deep investigation into the thermal degradation of urethane dimethacrylate polymer

Rafael Turra Alarcon et al.

Summary: This study delves into the thermal degradation process of a urethane dimethacrylate (UDMA) polymer, revealing its structure, reactivity, and degradation mechanisms. The research found that the degradation time of UDMA polymer is 3 years at 100.0 degrees C, and techniques such as MIR and nuclear magnetic resonance helped to identify UDMA degradation by-products.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Review Pharmacology & Pharmacy

3D Printing: an appealing technology for the manufacturing of solid oral dosage forms

Giulia Pitzanti et al.

Summary: The use of three-dimensional printing (3DP) as an alternative strategy for the fabrication of solid oral dosage forms (SODFs) is growing. Different 3DP technologies and materials have been explored, resulting in the successful manufacture of various SODFs with complex geometries and compositions. However, only one 3DP SODF has reached the market so far. Despite its potential, there are still technical and regulatory challenges that need to be addressed for the widespread use of 3DP in the pharmaceutical sector.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Stereolithography 3D printed implants: A preliminary investigation as potential local drug delivery systems to the ear

Alessandro Triacca et al.

Summary: The current study investigates the use of stereolithography 3D printing technology for personalized medicines, focusing on delivering drugs locally to treat ear infections. Multiple prototypes of drug-loaded implants were created and characterized, and in vitro tests were conducted. The results demonstrate the effectiveness of this technology in drug release and antimicrobial activity.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu et al.

Summary: Vat photo-polymerization 3D printing technology offers high resolution and fast printing speeds, making it ideal for creating custom medical devices and drug delivery systems. Its adoption is expected to advance personalized healthcare systems.

JOURNAL OF CONTROLLED RELEASE (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery

Xiaoyan Xu et al.

Summary: This study introduces the use of stereolithography (SLA) 3D printing for manufacturing novel indwelling bladder devices that allow extended and localized delivery of lidocaine hydrochloride. The devices showed good blood compatibility, resistance to external forces, and sustained drug release capabilities. This new approach offers potential for personalized and revolutionary intravesical drug delivery for bladder diseases.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Optimization of Printing Parameters for Digital Light Processing 3D Printing of Hollow Microneedle Arrays

Essyrose Mathew et al.

Summary: The study introduced a digital light processing (DLP) method for 3D printing hollow microneedle arrays using commercial UV curable resin, optimizing print quality by evaluating the effect of print angle on needle geometries and conducting mechanical testing.

PHARMACEUTICS (2021)

添加到收藏夹

Article Polymer Science

UV-Light Curing of 3D Printing Inks from Vegetable Oils for Stereolithography

Anda Barkane et al.

Summary: In order to meet the demand for sustainability, some vegetable oils can be modified for use in UV-assisted additive manufacturing technologies. Optimizing formulation conditions can significantly improve the photopolymerization performance and thermal-mechanical properties of the resin.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks

Osman Konuray et al.

Summary: Versatile acrylate-epoxy hybrid formulations are widely used in 3D printing applications, with added coupling agents to mitigate phase separation. These hybrid materials show significant improvement in Young's modulus, and can be easily molded into complex shapes for easy shape recovery under mild temperatures after thermal curing.

MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Tailoring Materials with Specific Wettability in Biomedical Engineering

Lingyu Sun et al.

Summary: Wettability, as a fundamental feature of solid surfaces, plays an increasingly important role in various fields, with particular attention to its applications in biomedical engineering in recent years.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA

Chih-Hsin Lin et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

添加到收藏夹

Article Materials Science, Biomaterials

3D printed microneedles for anticancer therapy of skin tumours

Md Jasim Uddin et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Novel Urethane-Dimethacrylate Monomers and Compositions for Use as Matrices in Dental Restorative Materials

Izabela M. Barszczewska-Rybarek et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction

Xiaoyan Xu et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing

Gustavo Gonzalez et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method

Pamela Robles-Martinez et al.

PHARMACEUTICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications

Donald C. Aduba et al.

MATERIALS TODAY COMMUNICATIONS (2019)

添加到收藏夹

Article Polymer Science

Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical μ-3D Printing of Thermosets

Migle Lebedevaite et al.

POLYMERS (2019)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Drug-releasing biopolymeric structures manufactured via stereolithography

Sanja Asikainen et al.

BIOMEDICAL PHYSICS & ENGINEERING EXPRESS (2019)

添加到收藏夹

Article Thermodynamics

Use of DSC in degree of conversion of dimethacrylate polymers: easier and faster than MIR technique

Rafael Turra Alarcon et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique

Annalisa Chiappone et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Stereolithographic (SLA) 3D printing of oral modified-release dosage forms

Jie Wang et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printable Antimicrobial Composite Resins

Jun Yue et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

添加到收藏夹

Article Engineering, Biomedical

Mechanical properties and thermal behaviour of PEGDMA hydrogels for potential bone regeneration application

John A. Killion et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)

添加到收藏夹

Article Toxicology

Comparison of XTT and Alamar blue assays in the assessment of the viability of various human cancer cell lines by AT-101 (-/- gossypol)

Selim Uzunoglu et al.

TOXICOLOGY MECHANISMS AND METHODS (2010)

添加到收藏夹

Review Chemistry, Applied

Study on microstructure of UV-curable polyurethane acrylate films

F. Wang et al.

PROGRESS IN ORGANIC COATINGS (2008)

添加到收藏夹

Article Toxicology

Comparison of alamar blue and MTT assays for high through-put screening

R Hamid et al.

TOXICOLOGY IN VITRO (2004)

添加到收藏夹

Article Engineering, Biomedical

Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials

JP Fisher et al.

BIOMATERIALS (2002)

添加到收藏夹

Article Thermodynamics

Cure degree estimation of photocurable coatings by DSC and differential photocalorimetry

CSB Ruiz et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.