☆ 4.6 Article

Characterizing the As-Fabricated State of Additively Fabricated IN718 Using Ultrasonic Nondestructive Evaluation

APPLIED SCIENCES-BASEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Investigation of temperature distribution and solidification morphology in multilayered directed energy deposition of Al-0.5Sc-0.5Si alloy

Amit Kumar Singh et al.

Summary: In this study, the temperature distribution, melt pool size, and solidification parameters were computed using a heat transfer and material flow model for the directed energy deposition process. The calculated results were compared with experimental measurements, showing good agreement in terms of thermal cycles, melt pool size, and solidification morphology.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Heat Treatment on Direct Laser Fabricated Stainless Steel 420-Inconel 718 Alloy Multi-material Structures

Beytullah Aydogan et al.

Summary: This study investigates the laser DED fabrication and heat treatment of multi-material structures made from stainless steel 420 and Inconel 718. By devising a specialized heat treatment method, the performance of the multi-material regions was improved.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Acoustics

Nonlinear ultrasonic technique for the characterization of microstructure in additive materialsa)

Aurelio Bellotti et al.

Summary: This study uses nonlinear ultrasonic techniques to track microstructural changes in additively manufactured metals, finding that the acoustic nonlinearity parameter beta is highly sensitive to dislocations and has a good correlation with hardness in these metals.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)

添加到收藏夹

Article Chemistry, Physical

Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition

Yong Chen Yeoh et al.

Summary: This study investigates microstructure variations in Inconel 718 produced by powder-blown DED with different deposition rates. High deposition rates lead to significant microstructure heterogeneity, affecting part performance, and standard heat treatments are found to be ineffective in homogenizing the microstructure.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of Compositionally Graded Interface on Microstructure and Compressive Deformation of 316L Stainless Steel to Al12Si Aluminum Alloy Bimetallic Structures

Yanning Zhang et al.

Summary: The study focused on processing SS 316L to Al12Si bimetallic structures using an additive manufacturing process, creating a compositionally graded interface to address mismatch issues. Different processing parameters influenced microstructural variations and intermetallic phase formations. After heat treatment, changes in microhardness and compression strength were observed, with minimal impact on compression strength due to heat treatment.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Acoustics

Ultrasound in situ characterization of hybrid additively manufactured Ti6Al4V

Luz D. Sotelo et al.

Summary: Quality control is a major barrier for the full utilization of metal additive manufacturing technologies, and in situ real time nondestructive monitoring is desirable. Ultrasonic NDE can quantify characteristics such as geometrical accuracy, porosity, defect size and content, and material properties. Ultrasonic measurement system has been used to collect real-time measurements during the manufacturing of samples made with a hybrid process, providing insight on various effects related to geometry, material, and process.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)

添加到收藏夹

Article Acoustics

Ultrasonic mapping of hybrid additively manufactured 420 stainless steel

Luz D. Sotelo et al.

Summary: Metal hybrid additive manufacturing processes can create complex structures that enhance engineering performance, posing challenges for nondestructive evaluation of functional gradients. Research shows that linear ultrasound measurements are effective in assessing the properties and microstructure of hybrid AM samples, highlighting their potential as an efficient and accessible nondestructive characterization method.

ULTRASONICS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

New insights into the origin of fine equiaxed microstructures in additively manufactured Inconel 718

I Cazic et al.

Summary: Fine equiaxed grain regions are frequently observed in additively manufactured Inconel 718 alloy. Through experimental proof, it has been shown that the grain refinement is caused by ISRO-mediated nucleation mechanism, expanding perspectives on microstructure control in additive manufacturing of Ni-based superalloys.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications

David Svetlizky et al.

Summary: Directed energy deposition (DED) is a branch of additive manufacturing (AM) processes that allows for site-specific deposition and repair, alloy design, and complex shape printing. This review critically examines recent advances in laser-material interactions, melt pool thermal behavior, and monitoring techniques, while also discussing critical processing variables, defect formation mechanisms, and high-end applications and challenges associated with DED processing.

MATERIALS TODAY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition

Beytullah Aydogan et al.

Summary: Multi-material structures require careful investigation into compatibility and behavior of constituent materials, with different compositions and ratios of alloys showing varying levels of performance.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: Integrated experimental and computational approach

Sameehan S. Joshi et al.

Summary: In this study, additive manufacturing of H13 steel was conducted using laser-aided directed energy deposition (L-DED) technique, with a focus on examining the microstructure and phase evolution under different processing parameters. The complex thermokinetics experienced during the L-DED process were simulated using a 3-dimensional multiphysics process model, which predicted important parameters related to microstructural morphology and cooling rate during solidification. The microstructure analysis revealed the presence of cellular morphology, carbide-rich precipitates, and bainite-like morphology within the ferrite/martensite grain structure, with a decrease in retained austenite and an increase in hardness observed with higher laser fluence and build height.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition

S. Pratheesh Kumar et al.

Summary: DED is a highly researched and rapidly growing additive manufacturing technique that has significant impact on the production of alloys like Inconel 625 and 718, particularly in critical applications in aerospace and automobile industries. This review analyzes the properties of these alloys, summarizes the important mechanical characteristics, relationships with DED processing variables, and suggests future research directions.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Build location effect on the single-track pore characteristics formed with the laser powder bed fusion process

Subin Shrestha et al.

Summary: The study shows that the build location significantly affects porosity in laser powder bed fusion, with the horizontal location being more important than the build height. Single tracks formed at a corner away from the build chamber window and towards the dispenser have the highest pore number and volume.

MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of laser post-processing on pore evolution of Ti-6Al-4V alloy by laser powder bed fusion

Bingnan Shen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing

A. Chabot et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phased array ultrasonic testing of micro-flaws in additive manufactured titanium block

Xiaohui Wang et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of energy density on the interface evolution of stainless steel 316L deposited upon INC 625 via directed energy deposition

D. R. Feenstra et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Review Chemistry, Physical

A Review on Metallic Alloys Fabrication Using Elemental Powder Blends by Laser Powder Directed Energy Deposition Process

Yitao Chen et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Assessment of grain structure evolution with resonant ultrasound spectroscopy in additively manufactured nickel alloys

Jeff Rossin et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Review Acoustics

A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control

F. Honarvar et al.

ULTRASONICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallographic texture and velocities of ultrasonic waves in a Ni-based superalloy manufactured by laser powder bed fusion

Amal Khabouchi et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Overview of non-destructive evaluation techniques for metal-based additive manufacturing

Catalin Mandache

MATERIALS SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design

Adrita Dass et al.

COATINGS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Comprehensive Microstructural Evaluation of Precipitation in Inconel 718

Davuluri Sindhura et al.

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Multi-material Additive Manufacturing of Metamaterials with Giant, Tailorable Negative Poisson's Ratios

Da Chen et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Standard method for microCT-based additive manufacturing quality control 4: Metal powder analysis

Anton du Plessis et al.

METHODSX (2018)

添加到收藏夹

Article Engineering, Mechanical

Analytical modelling of residual stress in additive manufacturing

O. Fergani et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)

添加到收藏夹

Article Acoustics

Ultrasonic attenuation of polycrystalline materials with a distribution of grain sizes

Andrea P. Arguelles et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Grain boundary precipitation in Inconel 718 and ATI 718Plus

Bilal Hassan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of selective laser melting (SLM) Inconel 718 part surface improvement by electrochemical polishing

Zhang Baicheng et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Metal Additive Manufacturing: A Review of Mechanical Properties

John J. Lewandowski et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)

添加到收藏夹

Article Chemistry, Physical

Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling

Yuan Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Proceedings Paper Physics, Applied

On- and Offline Ultrasonic Characterization of Components Built by SLM Additive Manufacturing

Hans Rieder et al.

42ND ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 6TH EUROPEAN-AMERICAN WORKSHOP ON RELIABILITY OF NDE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural and texture development in direct laser fabricated IN718

Lakshmi L. Parimi et al.

MATERIALS CHARACTERIZATION (2014)

添加到收藏夹

Article Optics

Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction

Fencheng Liu et al.

OPTICS AND LASER TECHNOLOGY (2013)

添加到收藏夹

Article Acoustics

Ultrasonic backscattering in polycrystals with elongated single phase and duplex microstructures

O. I. Lobkis et al.

ULTRASONICS (2012)

添加到收藏夹

Article Acoustics

Shape effect of elongated grains on ultrasonic attenuation in polycrystalline materials

L. Yang et al.

ULTRASONICS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263

G. V. S. Murthy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels

C. Hakan Gur et al.

MATERIALS CHARACTERIZATION (2007)

添加到收藏夹

Article Acoustics

Ultrasonic attenuation due to grain boundary scattering in copper and copper-aluminum

XG Zhang et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.