☆ 4.8 Article

Trimethylsilyl Compounds for the Interfacial Stabilization of Thiophosphate-Based Solid Electrolytes in All-Solid-State Batteries

ADVANCED SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Liquid-Phase Synthesis of Highly Deformable and Air-Stable Sn-Substituted Li3PS4 for All-Solid-State Batteries Fabricated and Operated under Low Pressures

Jehoon Woo et al.

Summary: The liquid-phase synthesis of sulfide solid electrolytes shows potential for mass production of all-solid-state Li batteries. However, the accessible compositions are mostly metal-free and suffer from high electronic conductivity due to carbon impurities, resulting in below-par performance. This study reports the liquid-phase synthesis of highly deformable and air-stable Li3+xP1-xSnxS4 electrolyte. The LS-SEs show remarkable enhancement in deformability and outperform conventional solid-state-synthesized SEs.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multifunctional Coatings on Sulfide-Based Solid Electrolyte Powders with Enhanced Processability, Stability, and Performance for Solid-State Batteries

Zachary D. Hood et al.

Summary: Sulfide-based solid-state electrolytes (SSEs) have high ionic conductivity and favorable mechanical properties, making them promising for next-generation solid-state batteries. Thin Al2O3 coatings grown on Li6PS5Cl powders using atomic layer deposition simultaneously address the stability issues and improve cell performance. These coated powders exhibit higher ionic conductivities, lower electronic conductivities, and improved stability at the Li-SSE interface, leading to significantly improved battery cycle life.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Organic-Additive-Derived Cathode Electrolyte Interphase Layer Mitigating Intertwined Chemical and Mechanical Degradation for Sulfide-Based Solid-State Batteries

Chanhyun Park et al.

Summary: Maintaining the integrity of the electrode-electrolyte interface is crucial for achieving longer cycle lives in solid-state batteries (SSBs). In this study, organic electrolyte additives are used in the cathode electrolyte interphase (CEI) layer to mitigate chemical and mechanical degradation in sulfide-based SSBs. The CEI layer derived from lithium difluorobis(oxalato)phosphate (LiDFBOP) exhibits dual functions by retarding chemical degradation at high charging potential and maintaining physical contact at low stack pressure. This research provides new perspectives and strategies for designing cathode coating materials in sulfide-based SSBs.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Review Energy & Fuels

Challenges in speeding up solid-state battery development

Juergen Janek et al.

Summary: Despite recent efforts to establish solid-state batteries as a safe and stable storage technology, challenges regarding long-term performance, power and economic viability still remain. This review highlights the importance of fast-conducting solid electrolytes, high-performance anodes, and diverse research approaches for the development of solid-state batteries. The authors emphasize the need to address the remaining key challenges for full-scale commercialization and implementation.

NATURE ENERGY (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress and Prospects of Inorganic Solid-State Electrolyte-Based All-Solid-State Pouch Cells

Changhong Wang et al.

Summary: All-solid-state batteries have attracted global attention due to their exceptional safety and high energy density. Significant progress has been made in achieving high room-temperature ionic conductivity and good air stability of solid-state electrolytes (SSEs), addressing challenges at the electrode-electrolyte interface, and developing feasible manufacturing processes. Inorganic all-solid-state pouch cells have been extensively studied and demonstrated, revealing their potential for industrial application.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

In situ modified sulfide solid electrolyte enabling stable lithium metal batteries

Jianwei Li et al.

Summary: Sulfide-based solid electrolytes with high ionic conductivity and wide electrochemical window are a research hotspot for all-solid-state lithium batteries. However, the interface problem between the sulfide electrolyte and lithium metal remains a challenge. In this study, coating the Li2S layer on the surface of the sulfide solid electrolyte successfully improved the stability of lithium metal batteries.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Water-Stable Sulfide Solid Electrolyte Membranes Directly Applicable in All-Solid-State Batteries Enabled by Superhydrophobic Li+-Conducting Protection Layer

Jieru Xu et al.

Summary: A universal method was developed to create water-stable sulfide solid electrolyte membranes through spray coating a Li+-conductive superhydrophobic protection layer, which demonstrates excellent superhydrophobicity and maintains high electrochemical performance even under extreme water exposure conditions.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Laidong Zhou et al.

Summary: A series of new lithium mixed-metal chlorospinels are reported as solid electrolytes for all-solid-state lithium batteries, which exhibit high ionic conductivity and low electronic conductivity, showing potential for high-performance all-solid-state lithium batteries.

NATURE ENERGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing Moisture Stability of Sulfide Solid-State Electrolytes by Reversible Amphipathic Molecular Coating

Zhaoxin Yu et al.

Summary: The all-solid-state battery (ASSB) is a promising energy storage technology for consumer electronics and electric vehicles. However, the poor moisture stability of sulfide solid-state electrolytes (SSEs) has hindered their mass production and application. In this study, a reversible surface coating strategy using amphipathic organic molecules is proposed to enhance the moisture stability of SSEs. This finding provides a new pathway for the deployment of moisture-sensitive SSEs and other energy materials.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel fluorescent covalent organic framework for the selective detection of fluoride ion

Yuxiang Zhao et al.

Summary: A novel fluorescent covalent organic framework COF-TMS was designed and prepared via the Povarov reaction for detecting fluorine ions. The electronic state of COF-TMS changed due to the replacement of trimethyl silicon with hydrogen atom, resulting in a noticeable fluorescence color change. The structure and optical property of COF-TMS remained unchanged in the presence of various anions, while the crystallinity significantly improved.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Thermal Runaway Behavior of Li6PS5Cl Solid Electrolytes for LiNi0.8Co0.1Mn0.1O2 and LiFePO4 in All-Solid-State Batteries

Taehun Kim et al.

Summary: The thermal stability of LPSCl with Ni-rich layered oxide cathode materials is poor, which can lead to thermal runaway. Combining LPSCl with LiFePO4 improves the thermal stability. In addition, despite its poor electrochemical activity for ASSBs, LiFePO4 shows excellent electrochemical performance.

CHEMISTRY OF MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Structural design strategies for superionic sodium halide solid electrolytes

Seungho Yu et al.

Summary: This study provides design principles for superionic sodium halide solid electrolytes (SEs) through systematic theoretical investigations. The study finds that certain structures of Na3MX6 compounds have high ionic conductivity, which can guide the development of high-voltage sodium all-solid-state batteries (ASSBs).

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Review Chemistry, Physical

Toward the Scale-Up of Solid-State Lithium Metal Batteries: The Gaps between Lab-Level Cells and Practical Large-Format Batteries

Lei Xu et al.

Summary: The scale-up process of solid-state lithium metal batteries is crucial for improving battery safety and energy density. While advanced approaches have shown success in lab-scale cells, challenges remain in applying these results to practical large-scale batteries. Promising opportunities to overcome these challenges are identified and feasible future strategies are proposed to guide further research.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

High-Pressure Studies of Trimethylsilane Azide by Raman Scattering and Synchrotron X-ray Diffraction

Yang Wen et al.

Summary: The high-pressure behavior of TMSiN3 was studied using in situ Raman scattering and synchrotron angle-dispersive X-ray diffraction techniques. The research revealed two liquid-liquid phase transitions and provided insights into the molecular structural evolution of organic azide under high pressure. These findings have implications for improving the formation of polynitrogen compounds with azides.

JOURNAL OF PHYSICAL CHEMISTRY B (2021)

添加到收藏夹

Article Chemistry, Physical

The Working Principle of a Li2CO3/LiNbO3 Coating on NCM for Thiophosphate-Based All-Solid-State Batteries

Felix Walther et al.

Summary: This study improves the performance of all-solid-state batteries (ASSBs) by using a Li2CO3/LiNbO3 coating, which suppresses the interfacial reaction between the cathode active material and solid electrolyte, leading to a significant enhancement in battery performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

On the Additive Microstructure in Composite Cathodes and Alumina-Coated Carbon Microwires for Improved All-Solid-State Batteries

Simon Randau et al.

Summary: The study investigates the influence of different morphologies and surface areas of carbon additives on the performance of all-solid-state batteries, revealing that fiber-shaped vapor-grown carbon additives can enhance cathode active material utilization, while particle-shaped carbons have minor effects. However, carbon additives generally lead to accelerated capacity loss and increased formation of solid electrolyte decomposition products. A protection concept involving alumina coating on carbon fibers is developed to minimize electrolyte degradation and enhance overall battery performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Deciphering Interfacial Chemical and Electrochemical Reactions of Sulfide-Based All-Solid-State Batteries

Changhong Wang et al.

Summary: The interfacial resistance in sulfide electrolyte-based all-solid-state lithium batteries is a major challenge, caused by oxygen loss from oxide cathodes oxidizing the electrolyte and inducing structural changes. High operating voltages also create non-oxygen species. Coating strategies are effective in mitigating some issues but not all.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes

Darren H. S. Tan et al.

Summary: The research successfully achieved stable operation of silicon anodes by using the interface passivating properties of sulfide solid electrolytes. Analysis showed that this approach eliminates continuous interfacial growth and irreversible lithium losses. The promising performance of microsilicon full cells can be attributed to the ideal interface properties between microsilicon and sulfide electrolytes and the unique chemomechanical behavior of the lithium-silicon alloy.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Ultra-thin free-standing sulfide solid electrolyte film for cell-level high all-solid-state lithium batteries

Gaozhan Liu et al.

Summary: By coating a thin, homogenous polydopamine layer on Li6PS5Cl electrolyte particles, this study successfully enhanced the energy density of all-solid-state lithium batteries while maintaining high cycling stability. The energy density of the full-cell was increased by reducing the thickness and weight of the electrolyte layer.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces

Rusong Chen et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

An electrolyte additive capable of scavenging HF and PF5 enables fast charging of lithium-ion batteries in LiPF6-based electrolytes

Jung-Gu Han et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Enhancement of the rate capabilities for all-solid-state batteries through the surface oxidation of sulfide solid electrolytes

Izuru Sasaki et al.

SOLID STATE IONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Eliminating the Detrimental Effects of Conductive Agents in Sulfide-Based Solid-State Batteries

Sixu Deng et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Energy & Fuels

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes

Yong-Gun Lee et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Experimental investigation on stability and thermal conductivity of dodecanethiol-coated copper nanofluids

Lu Zhou et al.

JOURNAL OF NANOPARTICLE RESEARCH (2020)

添加到收藏夹

Article Chemistry, Physical

Tailoring the Cation Lattice for Chloride Lithium-Ion Conductors

Yunsheng Liu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Functionalized Sulfide Solid Electrolyte with Air-Stable and Chemical-Resistant Oxysulfide Nanolayer for All-Solid-State Batteries

Wo Dum Jung et al.

ACS OMEGA (2020)

添加到收藏夹

Article Chemistry, Physical

Electro-chemo-mechanical evolution of sulfide solid electrolyte/Li metal interfaces: operando analysis and ALD interlayer effects

Andrew L. Davis et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Physical

Status and prospects of hydroborate electrolytes for all-solid-state batteries

Leo Duchene et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

A review of challenges and issues concerning interfaces for all-solid-state batteries

Hee-Dae Lim et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Visualization of the Interfacial Decomposition of Composite Cathodes in Argyrodite-Based All-Solid-State Batteries Using Time-of-Flight Secondary-Ion Mass Spectrometry

Felix Walther et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

On the Functionality of Coatings for Cathode Active Materials in Thiophosphate-Based All-Solid-State Batteries

Sean P. Culver et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Elucidating Reversible Electrochemical Redox of Li6PS5CI Solid Electrolyte

Darren H. S. Tan et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Degradation Mechanisms at the Li10GeP2S12/LiCoO2 Cathode Interface in an All-Solid-State Lithium-Ion Battery

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solid Halide Electrolytes with High Lithium-Ion Conductivity for Application in 4 V Class Bulk-Type All-Solid-State Batteries

Tetsuya Asano et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Advanced sulfide solid electrolyte by core-shell structural design

Fan Wu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Li3BO3-Li2CO3: Rationally Designed Buffering Phase for Sulfide All Solid-State Li-Ion Batteries

Sung Hoo Jung et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cation Mixing Properties toward Co Diffusion at the LiCoO2 Cathode/Sulfide Electrolyte Interface in a Solid-State Battery

Jun Haruyama et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A stable 3 V all-solid-state sodium-ion battery based on a closo-borate electrolyte

L. Duchene et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes

Raimund Koerver et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Structural and Electronic-State Changes of a Sulfide Solid Electrolyte during the Li Deinsertion-Insertion Processes

Takashi Hakari et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Interface Stability of Argyrodite Li6PS5Cl toward LiCoO2, LiNi1/3Co1/3Mn1/3O2, and LiMn2O4 in Bulk All-Solid-State Batteries

Jeremie Auvergniot et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Interface Stability in Solid-State Batteries

William D. Richards et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preferred Geometries and Energies of Sulfur Sulfur Interactions in Crystal Structures

Ivana S. Antonijevic et al.

CRYSTAL GROWTH & DESIGN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Gold surfaces and nanoparticles are protected by Au(0)-thiyl species and are destroyed when Au(I)-thiolates form

Jeffrey R. Reimers et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

添加到收藏夹

Article Energy & Fuels

High-power all-solid-state batteries using sulfide superionic conductors

Yuki Kato et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations

Yizhou Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Physical

Performance improvement of graphite/LiNi0.4Co0.2Mn0.4O2 battery at high voltage with added Tris (trimethylsilyl) phosphate

Haibo Rong et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bendable and Thin Sulfide Solid Electrolyte Film: A New Electrolyte Opportunity for Free-Standing and Stackable High-Energy All-Solid-State Lithium-Ion Batteries

Young Jin Nam et al.

NANO LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

A rocking chair type all-solid-state lithium ion battery adopting Li2O-ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte

Seitaro Ito et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Communication: Infrared spectroscopy of protonated allyl-trimethylsilane: Evidence for the β-silyl effect

Barbara Chiavarino et al.

JOURNAL OF CHEMICAL PHYSICS (2013)

添加到收藏夹

Article Chemistry, Physical

Tris(trimethylsilyl) borate as an electrolyte additive to improve the cyclability of LiMn2O4 cathode for lithium-ion battery

Yanbo Liu et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery

Atsushi Sakuda et al.

SCIENTIFIC REPORTS (2013)

添加到收藏夹

Article Chemistry, Physical

Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere

Hiromasa Muramatsu et al.

SOLID STATE IONICS (2011)

添加到收藏夹

Article Chemistry, Physical

Intefacial Observation between LiCoO2 Electrode and Li2S-P2S5 Solid Electrolytes of All-Solid-State Lithium Secondary Batteries Using Transmission Electron Microscopy

Atsushi Sakuda et al.

CHEMISTRY OF MATERIALS (2010)

添加到收藏夹

Article Electrochemistry

LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries

Narumi Ohta et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.