☆ 4.7 Review

Advances in the Fabrication of Nanoporous Anodic Aluminum Oxide and Its Applications to Sensors: A Review

NANOMATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Screen-printed graphene-carbon ink based disposable humidity sensor with wireless communication

Ajay Beniwal et al.

Summary: This article presents a flexible, cost-effective, and disposable humidity sensor developed on a paper substrate. The sensor demonstrates good sensing performance, high flexibility, stability, repeatability, short response/recovery time, and good reproducibility. The sensor's efficacy is evaluated for spatial humidity monitoring, respiration rate monitoring, and soil moisture monitoring, showing its potential applications in environmental, agricultural, and healthcare fields.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

添加到收藏夹

Article Materials Science, Ceramics

Formation of ferroelectric multi-domains and electrical conduction in epitaxial BiFeO3 nanodots fabricated with AAO nanotemplates

Yoonho Ahn et al.

Summary: The conduction properties of ferroelectric domains formed in nanoscale BiFeO3 (BFO) dots were evaluated for non-volatile memory applications. Different sizes of BFO dots were fabricated on Nb-doped SrTiO3 substrates, and the domain wall current and polarization-dependent current were measured. Multiple ferroelectric domains were found within one BFO dot, and a large current was observed at the domain wall location. The electrical resistance state depended on the presence or absence of domain walls.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Review Chemistry, Analytical

Advances in Humidity Nanosensors and Their Application: Review

Chin-An Ku et al.

Summary: With the advancement of technology revolution and industrialization, the development of humidity nanosensors has become crucial for various applications such as industry production line, food preservation, chemistry, agriculture, and environmental monitoring. Extensive research has been carried out on the design and synthesis of nanomaterials to enhance sensor performance, especially humidity sensing. Different nanomaterials including ceramics, polymers, semiconductors, sulfides, carbon-based materials, triboelectrical nanogenerators, and MXene have been studied for humidity sensing with various nanostructures. This review focuses on the sensing mechanism, fabrication methods, nanomaterial geometry, and recent advances in humidity nanosensors. Capacitive, resistive, and optical humidity nanosensors are discussed, and the similarities and differences in humidity-sensitive mechanisms of different materials are summarized. Future advancements include applications in IoT, environmental monitoring, and human-body monitoring.

SENSORS (2023)

添加到收藏夹

Article Chemistry, Physical

AAO-Assisted Nanoporous Platinum Films for Hydrogen Sensor Application

Melike Sener et al.

Summary: The effects of porosity and thickness on hydrogen sensing ability are demonstrated with a comparison of compact and nanoporous platinum film sensors. Anodic aluminum oxide (AAO) nanotubes were used as a template to fabricate nanoporous Pt films through an anodization method. Nanoporous Pt showed higher sensitivity and surface scattering phenomenon explained the hydrogen sensing mechanism.

CATALYSTS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Templated Synthesis of Diamond Nanopillar Arrays Using Porous Anodic Aluminium Oxide (AAO) Membranes

Chenghao Zhang et al.

Summary: In this study, ordered diamond nanopillar arrays were synthesized through a bottom-up approach using porous anodic aluminium oxide (AAO) templates. Commercial ultrathin AAO membranes were used as the growth template, and a three-step fabrication process involving chemical vapor deposition (CVD) was employed. After removing the AAO template, ordered arrays of submicron and nanoscale diamond pillars with diameters of around 325 nm and 85 nm, respectively, were successfully released.

NANOMATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thickness-dependent resistive switching memory characteristics of NiO nanodisks fabricated by AAO nanotemplate

Yoonho Ahn et al.

Summary: This study investigated the thickness-dependent resistive switching properties of NiO nanodisks and found that the forming voltage and set/reset operating voltage of the nanodisks decreased with a decrease in thickness. The electric field enhancement in localized regions appeared to contribute to the reduction in forming voltage. Additionally, the use of the C-AFM tip strengthened the local electric field in NiO nanodisk RRAM cells, leading to a reduction in set/reset voltage with decreased thickness.

CURRENT APPLIED PHYSICS (2023)

添加到收藏夹

Article Chemistry, Physical

Unique high-performance metal-nanoparticle-free SERS substrate with rapid-fabricated hybrid 3D-Nano-Micro-Cavities anodic alumina for label-free detection

C. K. Chung et al.

Summary: A new type of SERS substrate is proposed, which does not require the use of metal nanoparticles. The substrate is fabricated by electrochemically micromachining aluminum foil to create a roughened surface with randomly-distributed 3D over-etched cavities and nanopores of anodized aluminum oxide (AAO). This SERS substrate demonstrates high analytical enhancement and low detection limit, making it suitable for rapid detection of substances such as methylene blue.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Analytical

An Effective Resistive-Type Alcohol Vapor Sensor Using One-Step Facile Nanoporous Anodic Alumina

Chen-Kuei Chung et al.

Summary: A simple and effective resistive-type alcohol vapor sensor using one-step anodic aluminum oxide (AAO) is proposed in this study. The sensor has advantages of fast manufacturing and good detection limits, and can quickly distinguish whether the subject is drinking in a human breath test.

MICROMACHINES (2023)

添加到收藏夹

Review Chemistry, Analytical

Design, Fabrication, and Applications of SERS Substrates for Food Safety Detection: Review

Ding-Yan Lin et al.

Summary: Sustainable and safe food is a global concern, but traditional chemical methods of food safety testing have drawbacks such as high cost and long testing time. Current food safety analysis relies on various methods that require extensive training. Surface-enhanced Raman spectroscopy (SERS) has emerged as a promising tool for food safety testing, offering portability, non-destructiveness, and lower cost.

MICROMACHINES (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design of Robust Lubricant-Infused Surfaces for Anti-Corrosion

Junghoon Lee et al.

Summary: This study examines the effect of a specially designed bottle-shaped nanopore on the retentivity and anti-corrosion efficacy of lubricant oil on surfaces. The results show that the bottle-shaped pore helps to immobilize the oil and enhance its robustness and anti-corrosion properties. The increased oil capacity in the pore also allows for effective coverage of the underlying metallic surface at cracks, improving damage tolerance and self-healing capability. The use of higher viscosity oil further enhances these benefits and increases anti-corrosion efficacy.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Complementary Metal-Oxide-Semiconductor Compatible 2D Layered Film-Based Gas Sensors by Floating-Gate Coupling Effect

Po-Hung Tan et al.

Summary: A gas detector based on 2D SnSe2 layered film, with high sensitivity, wide dynamic range, and real-time response, is proposed in this study. The detector's performance is comparable to other state-of-the-art gas sensors.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Analytical

Microwave detection with various sensitive materials for humidity sensing

Xiao Wang et al.

Summary: The study focused on cooperative research on microwave detection with different types of sensitive materials to enhance performance and understand operation mechanisms. Using a double split-ring resonator as the sensitive electrode, various sensitive materials including polymer, ceramic, and metal composites were tested. The results showed that doping strong-polarity TiO2 nanoparticles into PI improved dielectric properties, achieving higher sensitivity, while the introduction of Ag nanoparticles facilitated water vapor adsorption and desorption, showing increased sensitivity.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

添加到收藏夹

Article Chemistry, Analytical

Pd/Ni nanowire film coated SAW hydrogen sensor with fast response

Xinyu Wang et al.

Summary: In this study, a Pd/Ni nanowires film-coated surface acoustic wave (SAW) device was developed for fast response hydrogen sensing. The experimental results demonstrate that the sensor has fast response time, high sensitivity, and low detection limit at room temperature, as well as excellent selectivity and stability.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interconnected three-dimensional anodized aluminum oxide (3D-AAO) metamaterials using different waveforms and metal layers for RGB display technology applications

Cristina Manzano et al.

Summary: The study investigates the influence of different waveforms on the optical and morphological properties of 3D-AAO metamaterials and explains the effect of waveform on colors and hues through a theoretical model. Additionally, the research examines how color can be enhanced by depositing a thin metal layer on top of 3D-AAO and develops a theoretical model for the thickness of the metal layer.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

添加到收藏夹

Article Chemistry, Physical

Novel irregular pore peripheral plasmonic mechanism of nanocomposite metal-nanoporous AAO using new facile one-step anodization and pore widening for high SERS enhancement

C. Y. Yu et al.

Summary: In this study, a new SERS substrate based on irregular nanopore anodic aluminum oxide with platinum-metal-film coating was proposed. The SERS mechanism was explained by the peripheral plasmonic mechanism of the substrate. Experimental results showed that the substrate achieved high enhancement factor and low limit of detection for detecting pollutants and sanitizing water.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Simulation, analysis, fabrication and characterization of tunable AAO membrane for microfluidic filtration

Saher Manzoor et al.

Summary: Microfluidic filtration is crucial in biomedical applications, but visualizing the process is challenging. This study utilizes ANSYS Fluent for system design and fuzzy simulations to optimize flow rate and velocity for Anodized Aluminium oxide membrane. By studying the relation between driving force, membrane area, and fluid flow, the researchers were able to manipulate flow rate during filtration and address other challenges that arise.

JOURNAL OF INTELLIGENT & FUZZY SYSTEMS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication and characterization of well-ordered PbS nanowires in aluminum oxide template by sulfurization and vacuum injection molding processes

Shao-Fu Chang et al.

Summary: Lead nanowire arrays were fabricated using anodic aluminum oxide templates, and lead sulfide nanowires were synthesized via sulfurization. The formation mechanism and properties of the nanowires were investigated using various techniques.

NANOTECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of the Anodizing Temperature on Microstructure and Tribological Properties of 6061 Aluminum Alloy Anodic Oxide Films

Feng Guo et al.

Summary: Anodizing is a simple and effective method to improve the wear resistance of 6061 aluminum alloy. This study investigated the effect of electrolyte temperature on the microstructure and friction performance of the oxide films. The results showed that the temperature significantly influenced the surface structure and thickness of the oxide films, and also affected their friction properties.

COATINGS (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Chemical vapor deposition of 2D materials: A review of modeling, simulation, and machine learning studies

Sayan Bhowmik et al.

Summary: Chemical vapor deposition (CVD) is widely used in the production of large-area two-dimensional materials. This article surveys the literature on modeling and simulation of CVD growth of 2D materials, focusing on graphene, hBN, and transition metal dichalcogenides. The article discusses the use of density functional theory, kinetic Monte Carlo, and reactive molecular dynamics simulations to understand the thermodynamics and kinetics of vapor-phase synthesis. It also explores the application of machine learning in studying growth mechanisms and outcomes, and highlights the knowledge gaps in the field.

ISCIENCE (2022)

添加到收藏夹

Article Chemistry, Analytical

Development and Analysis of Electrochemical Reactor with Vibrating Functional Element for AAO Nanoporous Membranes Fabrication

Urte Cigane et al.

Summary: A new electrochemical reactor with a vibrating element is proposed for the fabrication of nanoporous AAO membranes. The possibility of exciting five resonant modes in the AAO membrane at different frequencies is theoretically demonstrated and experimentally confirmed. Moreover, nanoporous AAO membranes are successfully synthesized with specific pore diameters and porosity.

SENSORS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Powered Carbon Ink/Filter Paper Flexible Humidity Sensor Based on Moisture-Induced Voltage Generation

Xiaoqiang Li et al.

Summary: In this study, a self-powered humidity sensor based on cellulose paper was proposed. The sensor was fabricated using a simple method and demonstrated a wide sensing range, good linearity, high sensitivity, and excellent flexibility. It showed successful applications in monitoring human health and air humidity.

LANGMUIR (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cation-Selective Oxide Semiconductor Mesoporous Membranes for Biomimetic Ion Rectification and Light-Powered Ion Pumping

Li Li et al.

Summary: Inspired by the cyclic ion transport in purple bacteria, researchers have developed a bilayer inorganic membrane that mimics the functions of ion channels and ion pumps. This membrane allows for ion rectification and light-powered ion pumping, and its asymmetric charge distribution and built-in electric field enable control of ion transport direction and concentration.

SMALL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wettability tailored superhydrophobic and oil-infused slippery aluminium surface for improved anti-corrosion performance

Alina Peethan et al.

Summary: Inspired by superhydrophobic surfaces in nature, researchers have fabricated superhydrophobic and liquid-infused porous surfaces (SLIPS) to solve engineering problems, including metal corrosion. The study shows that the H-SLIPS, a hydrophobic, superhydrophobic, hydrophobic lubricant-infused surface, exhibits better self-healing properties and lubricant layer stability compared to the SH-SLIPS. The research emphasizes the importance of infused oil stability for applications like anti-corrosion properties and provides insights into the development of new materials for corrosion resistance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

A newly designed Ni-P duplex coating on friction stir welding joint of 6061-T6 aluminum

Jiahuan Chen et al.

Summary: A newly designed duplex Ni-P coating was fabricated on friction stir welded joints to improve durability through enhanced adhesion and corrosion resistance. The experimental results showed that the duplex Ni-P coating exhibited superior adhesion and anti-corrosion properties.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Review Chemistry, Analytical

Advances in Novel Nanomaterial-Based Optical Fiber Biosensors-A Review

Muyang Li et al.

Summary: This article concisely summarizes the current advancements in novel nanomaterial-based optical fiber biosensors and highlights the wide application of optical and biological properties of nanomaterials in biosensing. By enhancing sensitivity, limit of detection, specificity, response time, and signal-to-noise ratio, nanomaterials improve the performance of fiber optic biosensors.

BIOSENSORS-BASEL (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Continuous and Real-Time Measurement of Plant Water Potential Using an AAO-Based Capacitive Humidity Sensor for Irrigation Control

Sanghoon Han et al.

Summary: This article presents the development of a water potential measurement system using sensors for water stress analysis in tomato plants, providing better irrigation plan feedback. The system uses capacitive sensing to measure humidity and records capacitance data. Calibration data derived from superabsorbent polymer and deionized water mixtures accurately represent the water potential value. This continuous water potential sensing system allows for quantitative monitoring of plant stem water stress and setting irrigation schedules for high-quality agricultural products.

ACS APPLIED ELECTRONIC MATERIALS (2022)

添加到收藏夹

Review Biochemistry & Molecular Biology

Progress in Laser Ablation and Biological Synthesis Processes: Top-Down and Bottom-Up Approaches for the Green Synthesis of Au/Ag Nanoparticles

Zhiwen Jiang et al.

Summary: This article focuses on the progress of two synthesis methods for Au/Ag NPs: laser ablation and biological synthesis, emphasizing their fabrication fundamentals and potential applications in biology, tumor diagnosis and treatment, and other fields.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Article Engineering, Chemical

Interaction of tetradecyltrimethylammonium bromide with bovine serum albumin in different compositions: Effect of temperatures and electrolytes/urea

Joynal Abedin et al.

Summary: The study investigated the interaction between BSA and TTAB in different solvents, finding changes in critical micelle concentration and spontaneity of micellization process. The addition of salt decreased the cmc value in mixed systems, while temperature and additives influenced the dissociation degree and fraction of ion binding. The free energy of micellization was found to be negative, indicating energetically spontaneous micellization process.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Optical Aptamer-Based Sensors for Detecting Plant Hormones

Silu Feng et al.

Summary: This paper introduces a new chip equipped with sensors for screening and detecting hormones in plant samples, which can automatically deliver samples to sensors on the chip and detect five plant hormones in as little as 1 μl samples within less than 30 minutes with high specificity and sensitivity. The chip offers a suitable platform for rapid, sensitive, and inexpensive screening and identification of plant hormones in raw plant samples.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Advanced VLS growth of gold encrusted silicon nanowires Mediated by porous Aluminium Oxide template

Bagur R. Deepu et al.

Summary: A highly efficient technique was developed for generating dense and homogeneous Au-nanodroplets using Anodic Aluminium Oxide template (AAO) to fabricate single crystal gold encrusted array of silicon nanowires (SiNWs). By tearing up the Au-thin film and removing the AAO template before VLS growth, smaller Au-nanodroplets were obtained, leading to a denser array of SiNWs under specific experimental conditions.

VACUUM (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Nanoporous Anodic Alumina: Principles, Engineering, and Applications

Jakub T. Domagalski et al.

Summary: The development of aluminum anodization technology has gone through many stages and evolved into a iconic nanofabrication technique with wide applications. Nanoporous anodic alumina can be used for templates, photonic structures, membranes, drug delivery platforms, nanoparticles, and more. The advancement in this technology would not be possible without decades of consecutive findings and a deeper understanding of the process.

NANOMATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Harnessing Slow Light in Optoelectronically Engineered Nanoporous Photonic Crystals for Visible Light-Enhanced Photocatalysis

Siew Yee Lim et al.

Summary: Spectrally tunable nanoporous anodic alumina distributed Bragg reflectors (NAA-DBRs) modified with titanium dioxide (TiO2) coatings were used as optoelectronic platforms to utilize slow light for photocatalysis. The performance of the photocatalysts is influenced by the spectral position of the photonic stop band (PSB) and thickness of the semiconductor, with optimal performance achieved when the red edge of the PSB is close to the red or blue boundary of the absorbance band of methylene blue (MB).

ACS CATALYSIS (2021)

添加到收藏夹

Review Chemistry, Analytical

PDMS Microfabrication and Design for Microfluidics and Sustainable Energy Application: Review

Lin Lin et al.

Summary: PDMS is widely used in various fields due to its unique properties, including transparency, flexibility, biocompatibility, and hydrophobicity. However, issues with hydrophobic recovery on its surface limit its applications in capillary microchips. The dual-tone PDMS-to-PDMS casting and the use of PDMS in TENG are crucial for addressing these challenges.

MICROMACHINES (2021)

添加到收藏夹

Article Chemistry, Analytical

Enhanced Capacitive Humidity Sensing Performance at Room Temperature via Hydrogen Bonding of Cyanopyridone-Based Oligothiophene Donor

Salman Ali et al.

Summary: Cyanopyridone-based oligothiophene donors with both hydrophobic and hydrophilic characters were evaluated for humidity sensing. Surface studies revealed a nanofibrous network for CP6, leading to favorable sensing performance with high sensitivity, quick response/recovery, wide working range, low hysteresis, recyclability, and long-term stability. Hydrophilicity and hydrogen bonding appear to play a vital role in enhancing humidity sensing performance.

CHEMOSENSORS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optical Platform to Analyze a Model Drug-Loading and Releasing Profile Based on Nanoporous Anodic Alumina Gradient Index Filters

Pankaj Kapruwan et al.

Summary: A methodology utilizing NAA-GIFs optical properties to evaluate and measure the release dynamics of a model drug filling the pores has been developed. This method serves as a tool for studying drug delivery from porous nanostructures.

NANOMATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Large-pores anodizing of 5657 aluminum alloy in phosphoric acid: an in-situ electrochemical study

A. Gasco-Owens et al.

Summary: The study shows that under appropriate chemical and electrochemical conditions, it is possible to fabricate AAO layer with large and regular pores on complex commercial aluminum alloys. The presence of alloying elements induces morphological specificities, such as the cyclic accumulation/dissolution of noble elements leading to the formation of regularly spaced transversal pores.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Cost-effective technique to fabricate a tubular through-hole anodic aluminum oxide membrane using one-step anodization

Yu-Chin Chien et al.

Summary: This study successfully prepared tubular through-hole anodic aluminum oxide (AAO) membranes with larger nanotube pore size and thinner thickness by improving the manufacturing processes.

MICROELECTRONIC ENGINEERING (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Ordered nanostructures arrays fabricated by anodic aluminum oxide (AAO) template-directed methods for energy conversion

Huanming Zhang et al.

Summary: Ordered nanostructures arrays fabricated by AAO template-directed methods have shown higher efficiency and structural controllability in mechanical energy, solar energy, electrical energy, and chemical energy conversions.

NANOTECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Analytical

A high-and-rapid-response capacitive humidity sensor of nanoporous anodic alumina by one-step anodizing commercial 1050 aluminum alloy and its enhancement mechanism

C. K. Chung et al.

Summary: A high-performance humidity sensor was fabricated using commercial large-area low-purity aluminum 1050 alloy through hybrid-pulse anodization in 0.3 M oxalic acid at 20 V at 25 degrees C. The sensor exhibited high response, quick response-recovery time, low cost, short fabrication time, and high capacitance.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

添加到收藏夹

Article Chemistry, Analytical

A new and facile route to prepare gold nanoparticle clusters on anodic aluminium oxide as a SERS substrate

Tugba Tezcan et al.

Summary: A new SERS-active gold nanoparticle clusters with flower-shape were easily prepared on nano porous anodic aluminium oxide (AAO) without complex production steps, providing enhanced Raman signal for label-free nitrate ion measurements. The method demonstrated high sensitivity with a detection limit of 1.03 ppm and remarkable recoveries for nitrate spiked into drinking water samples. The sensor platform showed good inter-day and intra-day precisions, making it a cost-effective alternative for SERS based sensing applications.

TALANTA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulation, synthesis and band-gap engineering of 2nd group doped ZnO nanostructures

Ghulam Sarwar et al.

Summary: This study explores the effect of 2nd group element doping in ZnO nanostructures on band-gap and particle size. Results show that the addition of Be, Mg, Ca and Sr elements in ZnO nano-crystals leads to a decrease in rod length and an increase in band-gap. Fuzzy logic rule based system proves to be effective in simulating the experimental results.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visible Photoluminescence of Variable-Length Zinc Oxide Nanorods Embedded in Porous Anodic Alumina Template for Biosensor Applications

Uldis Malinovskis et al.

Summary: The study presents a method to synthesize aligned ZnO nanorods with variable length in pores of porous anodic aluminum oxide through atomic layer deposition. The intensity variation of different color photoluminescence components correlates with the anti-reflective properties of the composite film, offering a way to selectively enhance or suppress color components of hybrid fluorescent emitters by tuning only geometric parameters. As an application example, the composite film was tested for sensing of VEGF using fluorescence microscopy setup, where the yellow and green PL components decreased with increased VEGF concentrations while the blue component remained constant.

COATINGS (2021)

添加到收藏夹

Article Chemistry, Physical

Preparation and Characterization of Pure SiC Ceramics by HTPVT Induced by Seeding with SiC Nanoarrays

Yu-Chen Deng et al.

Summary: Dense SiC ceramics were fabricated using SiC nanoarrays as crystal seeds in a HTPVT growth process, achieving high density, large grain size, high hardness, high flexural strength, and good thermal conductivity.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

High-throughput fabrication of high aspect ratio Ag/Al nanopillars for optical detection of biomarkers

Ainash Garifullina et al.

Summary: Nanostructures based on nanomaterials offer high precision and detection limits for biomarker detection, but challenges persist in mass production due to complexity and costs. New cost-effective nanofabrication techniques are essential for advancing nanotechnology in healthcare applications.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Collagen Nanofibers and Silanization on the Interaction of HaCaT Keratinocytes and 3T3 Fibroblasts with Alumina Nanopores

Deepanjalee Dutta et al.

Summary: The modification of nanoporous anodic aluminum oxide (AAO) membranes with biochemical features such as collagen nanofibers or amino groups has shown promising results in promoting cell adhesion for potential wound healing applications. Both 3T3 fibroblasts and HaCaT keratinocytes exhibited comparable metabolic activities on bare and silanized AAO pores until 72 h, but showed reduced proliferation on AAO with collagen nanofibers. The functionalization strategies have high potential to specifically control molecular signaling and cell migration, indicating a promising direction for further development of alumina nanopores for wound healing.

ACS APPLIED BIO MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Creating anodic alumina nanochannel arrays with custom-made geometry

Chih-Yi Liu et al.

JOURNAL OF THE CHINESE CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Large Scale Fabrication of Ordered Gold Nanoparticle-Epoxy Surface Nanocomposites and Their Application as Label-Free Plasmonic DNA Biosensors

Tomas Lednicky et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Tailor-made porous striped gold-silver nanowires for surface enhanced Raman scattering based trace detection of β-hydroxybutyric acid

Yanisa Sanguansap et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

On-spot surface enhanced Raman scattering detection of Aflatoxin B1 in peanut extracts using gold nanobipyramids evenly trapped into the AAO nanoholes

Bingyong Lin et al.

FOOD CHEMISTRY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Resistive- and capacitive-type humidity and temperature sensors based on a novel caged nickel sulfide for environmental monitoring

Muneeb-ur-Rahman et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Total effective surface area principle for enhancement of capacitive humidity sensor of thick-film nanoporous alumina

C. K. Chung et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cauliflower-Like Nanostructured Localized Surface Plasmon Resonance Biosensor Chip for Cytokine Detection

Xi Luo et al.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2020)

添加到收藏夹

Article Chemistry, Physical

Reliable DC voltage generation based on the enhanced performance triboelectric nanogenerator fabricated by nanoimprinting-poling process and an optimized high efficiency integrated circuit

Donghyeon Yoo et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Capacitive humidity sensors based on mesoporous silica and poly(3,4-ethylenedioxythiophene) composites

Rongrong Qi et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Analytical

Aptamer-Capped nanoporous anodic alumina for Staphylococcus aureus detection

Luis Pla et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

High-level expression of aryl-alcohol oxidase 2 from Pleurotus eryngii in Pichia pastoris for production of fragrances and bioactive precursors

Nina Jankowski et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Silver loaded anodic aluminum oxide defective photonic crystals and their application for surface enhanced Raman scattering

Xiao-Gang Wang et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Vertical Flow Assay for Inflammatory Biomarkers Based on Nanofluidic Channel Array and SERS Nanotags

Ruipeng Chen et al.

SMALL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Investigation of surface and mechanical properties of Anodic Aluminium Oxide (AAO) developed on Al substrate for an electronic package enclosure

Muralidharan Sundararajan et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Applied

Effect of hydrothermal treatment on porous anodic alumina generated by one-step anodization

Yongzhao Li et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Analytical

Anodic alumina membrane capacitive sensors for detection of vapors

Stepan K. Podgolin et al.

TALANTA (2020)

添加到收藏夹

Article Chemistry, Analytical

Environmental Copper Sensor Based on Polyethylenimine-Functionalized Nanoporous Anodic Alumina Interferometers

Simarpreet Kaur et al.

ANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Fabrication of thin-film spherical anodic alumina oxide templates using a superimposed nano-micro structure

C. K. Chung et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Physics, Applied

Relative humidity sensing properties of indium nitride compound with oxygen doping on silicon and AAO substrates

Chih Chin Yang et al.

MODERN PHYSICS LETTERS B (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Long-term analysis of PV module with large-area patterned anti-reflective film

Daihong Huh et al.

RENEWABLE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Label-Free Exosome Detection Based on a Low-Cost Plasmonic Biosensor Array Integrated with Microfluidics

Xiaoqing Lv et al.

LANGMUIR (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Organic nanostructure sensing layer developed by AAO template for the application in humidity sensors

Rachmat Andika et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

A novel humidity and ammonia sensor based on nanofibers/polyaniline/polyvinyl alcohol

V. P. Anju et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

添加到收藏夹

Article Polymer Science

Bamboo-like nanostructures prepared using template-based wetting methods: Molecular arrangements of polyimide and carbon tubes in cylindrical nanopores

Yi-Hsuan Tu et al.

POLYMER (2019)

添加到收藏夹

Review Chemistry, Physical

Rational design of novel nanostructured arrays based on porous AAO templates for electrochemical energy storage and conversion

Qiliang Wei et al.

NANO ENERGY (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

A review of 2D and 3D plasmonic nanostructure array patterns: fabrication, light management and sensing applications

Sujan Kasani et al.

NANOPHOTONICS (2019)

添加到收藏夹

Article Chemistry, Applied

The effect of propylene glycol on the optical properties of iridescent porous anodic alumina films

Shi-Yuan Zhang et al.

JOURNAL OF POROUS MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anodized Aluminum Oxide/Polydimethylsiloxane Hybrid Mold for Roll-to-Roll Nanoimprinting

Sanghoon Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Engineering, Environmental

Repeatable replication method with liquid infiltration to fabricate robust, flexible, and transparent, anti-reflective superhydrophobic polymer films on a large scale

Seongmin Kim et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Physics, Applied

One-step nanoimprinted hybrid micro-/nano-structure for in situ protein detection of isolated cell array via localized surface plasmon resonance

Riyaz Ahmad Mohamed Ali et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-imprint moth-eye anti-reflective and self-cleaning film with enhanced resistance

Ivan Navarro-Baena et al.

NANOSCALE (2018)

添加到收藏夹

Article Chemistry, Analytical

Fabrication and Optimization of Bilayered Nanoporous Anodic Alumina Structures as Multi-Point Interferometric Sensing Platform

Mahdieh Nemati et al.

SENSORS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The nanoporous anodic alumina oxide formed by two-step anodization

Sevgi Ates et al.

THIN SOLID FILMS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Long- range ordered vertical III- nitride nanocylinder arrays via plasma- assisted atomic layer deposition

Ali Haider et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Plasmonic Biosensor Based on Vertical Arrays of Gold Nanoantennas

Stephanie Klinghammer et al.

ACS SENSORS (2018)

添加到收藏夹

Article Electrochemistry

Fabrication of Crystallized Porous Anodic Aluminum Oxide under Ultra-High Anodization Voltage

Shize Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Gecko-like Branched Polymeric Nanostructures from Nanoporous Templates

Iwona Blaszczyk-Lezak et al.

LANGMUIR (2018)

添加到收藏夹

Article Electrochemistry

Enhancement of Surface Raman Spectroscopy Performance by Silver Nanoparticles on Resin Nanorods Arrays from Anodic Aluminum Oxide Template

K. T. Tu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Electrochemistry

Role of Oxalate Anions on the Evolution of Widened Pore Diameter and Characteristics of Room-Temperature Anodic Aluminum Oxide

C. K. Chung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Analytical

Easy-to-Fabricate and High-Sensitivity LSPR Type Specific Protein Detection Sensor Using AAO Nano-Pore Size Control

Sae-Wan Kim et al.

SENSORS (2017)

添加到收藏夹

Article Chemistry, Physical

Surface characterization of nanoporous aluminium oxide films synthesized by single-step DC and AC anodization

Nagaraj M. Chelliah et al.

SURFACES AND INTERFACES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Impurity and temperature enhanced growth behaviour of anodic aluminium oxide from AA5052 Al-Mg alloy using hybrid pulse anodization at room temperature

C. K. Chung et al.

CORROSION SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of Anodic Aluminum Oxide with Branched and Meshed Pores

Byeol Kim et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of pre-anodization voltage on pore arrangement in anodic alumina produced by hard anodization

Malgorzata Norek et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of iridescent Ni-containing anodic aluminum oxide films by anodization in oxalic acid

Qin Xu et al.

OPTICAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Analytical

Optimization of porous anodic alumina nanostructure for ultra high sensitive humidity sensor

Kusum Sharma et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Characterization of Porous Anodic Aluminum Oxide Films by Luminescence Methods - A Review

Stevan Stojadinovic et al.

CURRENT NANOSCIENCE (2015)

添加到收藏夹

Article Chemistry, Analytical

Fabrication of porous anodic aluminium oxide layers on paper for humidity sensors

Mamadou Balde et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

添加到收藏夹

Article Chemistry, Analytical

Effect of oxalic acid concentration on the magnetically enhanced capacitance and resistance of AAO humidity sensor

C. K. Chung et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

AAO-assisted synthesis of highly ordered, large-scale TiO2 nanowire arrays via sputtering and atomic layer deposition

Zhao Yao et al.

NANOSCALE RESEARCH LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

Growth of porous anodized alumina on the sputtered aluminum films with 2D-3D morphology for high specific surface area

M. W. Liao et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fabrication of porous anodic aluminum oxide by hybrid pulse anodization at relatively high potential

C. K. Chung et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2014)

添加到收藏夹

Article Chemistry, Analytical

Sensitivity evolution and enhancement mechanism of porous anodic aluminum oxide humidity sensor using magnetic field

S. W. Chen et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

添加到收藏夹

Article Chemistry, Analytical

Optically Optimized Photoluminescent and Interferometric Biosensors Based on Nanoporous Anodic Alumina: A Comparison

Abel Santos et al.

ANALYTICAL CHEMISTRY (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

On characteristics of pore size distribution in hybrid pulse anodized high-aspect-ratio aluminum oxide with Taguchi method

C. K. Chung et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Capacitive humidity sensors based on large diameter porous alumina prepared by high current anodization

M. Almasi Kashi et al.

SENSORS AND ACTUATORS A-PHYSICAL (2012)

添加到收藏夹

Article Chemistry, Physical

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

Melinda Vargova et al.

APPLIED SURFACE SCIENCE (2011)

添加到收藏夹

Article Electrochemistry

Fabrication of enhanced anodic aluminum oxide performance at room temperatures using hybrid pulse anodization with effective cooling

C. K. Chung et al.

ELECTROCHIMICA ACTA (2011)

添加到收藏夹

Article Electrochemistry

Anodic alumina membranes with defined pore diameters and thicknesses obtained by adjusting the anodizing duration and pore opening/widening time

Leszek Zaraska et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of pulse voltage and aluminum purity on the characteristics of anodic aluminum oxide using hybrid pulse anodization at room temperature

C. K. Chung et al.

THIN SOLID FILMS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of temperature and voltage mode on nanoporous anodic aluminum oxide films by one-step anodization

C. K. Chung et al.

THIN SOLID FILMS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Anodization of Aluminum for Nanotechnology Applications

Woo Lee

JOM (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly ordered porous alumina with tailor-made pore structures fabricated by pulse anodization

Woo Lee et al.

NANOTECHNOLOGY (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced humidity sensitivity of nanoporous alumina films by controlling the concentration and type of impurity in pore wall

Zenghua He et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2010)

添加到收藏夹

Article Electrochemistry

Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures

Grzegorz D. Sulka et al.

ELECTROCHIMICA ACTA (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hybrid pulse anodization for the fabrication of porous anodic alumina films from commercial purity (99%) aluminum at room temperature

C. K. Chung et al.

NANOTECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Analytical

Capacitive humidity sensor design based on anodic aluminum oxide

Youngdeuk Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlled Assembly of Highly Raman-Enhancing Silver Nanocap Arrays Templated by Porous Anodic Alumina Membranes

Teng Qiu et al.

SMALL (2009)

添加到收藏夹

Article Electrochemistry

Pore diameter control of anodic aluminum oxide with ordered array of nanopores

Allen Bai et al.

ELECTROCHIMICA ACTA (2008)

添加到收藏夹

Article Chemistry, Physical

An application of AAO template: orderly assembled organic molecules for surface-enhanced Raman scattering

Zhixun Luo et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

添加到收藏夹

Article Spectroscopy

Laser-MBE of nickel nanowires using AAO template: A new active substrate of surface enhanced Raman scattering

Lisheng Zhang et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2008)

添加到收藏夹

Article Chemistry, Physical

An investigation of the surface-enhanced Raman scattering effect from new substrates of several kinds of nanowire arrays

Lisheng Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)

添加到收藏夹

Article Chemistry, Physical

Surface enhanced Raman scattering of biospecies on anodized aluminum oxide films

C. Zhang et al.

CHEMICAL PHYSICS LETTERS (2007)

添加到收藏夹

Article Chemistry, Analytical

Magnetron sputtering of silver nanowires using anodic aluminum oxide template: A new active substrate of surface enhanced Raman scattering and an investigation of its enhanced mechanism

Lisheng Zhang et al.

ANALYTICA CHIMICA ACTA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of film thickness and annealing temperature on hillock distributions in pure Al films

Soo-Jung Hwang et al.

SCRIPTA MATERIALIA (2007)

添加到收藏夹

Article Electrochemistry

A study of anodization process during pore formation in nanoporous alumina templates

Z. Wu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

添加到收藏夹

Article Chemistry, Physical

Fast fabrication of long-range ordered porous alumina membranes by hard anodization

Woo Lee et al.

NATURE MATERIALS (2006)

添加到收藏夹

Article Physics, Applied

Nanoimprinting using Ni molds prepared from highly ordered anodic porous alumina templates

Takashi Yanagishita et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2006)

添加到收藏夹

Article Electrochemistry

Epitaxial growth of Cu nanodot arrays using an AAO template on a Si substrate

T Shimizu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Colour properties of barrier anodic oxide films on aluminium and titanium studied with total reflectance and spectroscopic ellipsometry

S Van Gils et al.

SURFACE & COATINGS TECHNOLOGY (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of free-standing nanoscale alumina membranes with controllable pore aspect ratios

CS Toh et al.

NANO LETTERS (2004)

添加到收藏夹

Article Chemistry, Physical

Surface enhanced Raman scattering from transition metal nano-wire array and the theoretical consideration

JL Yao et al.

SURFACE SCIENCE (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Titanium oxide nanotube arrays prepared by anodic oxidation

D Gong et al.

JOURNAL OF MATERIALS RESEARCH (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure of thermal hillocks on blanket Al thin films

D Kim et al.

THIN SOLID FILMS (2000)

添加到收藏夹

Article Chemistry, Analytical

Study of the performance degradation of thin film aluminum oxide sensor at high humidity

RK Nahar

SENSORS AND ACTUATORS B-CHEMICAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.