☆ 4.5 Article

Modelling Crack Growth in Additively Manufactured Inconel 718 and Inconel 625

METALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A framework for automating the parameter determination of crack growth models

Athanasios Iliopoulos et al.

Summary: Motivated by the need for efficient fatigue crack growth prediction, this paper presents the development of an automated computational framework for determining crack growth model parameters. It explores and compares various global optimization methods for parameter determination, evaluates their performance using synthetic and actual data, and introduces the concept of total least-squares minimization in crack growth modeling. Open-source software and an application implementing this approach are also described and made available for distribution.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Chemistry, Physical

Fatigue Crack Growth Rate Description of RF-Plasma-Sprayed Refractory Metals and Alloys

Ondrej Kovarik et al.

Summary: A fitting method was developed to describe fatigue crack growth rate (FCGR) data, which can be used to quantify the fracture behavior of RF-plasma-sprayed materials. The method categorized the materials into two distinct sets based on their FCGR parameters. One set consisted of deposits made from brittle refractory metals with a wide range of fatigue crack growth thresholds, while the other set consisted of deposits with suppressed defects and different fracture toughness values based on the reinforcement particles.

MATERIALS (2023)

添加到收藏夹

Article Crystallography

Computing the Durability of WAAM 18Ni-250 Maraging Steel Specimens with Surface Breaking Porosity

Daren Peng et al.

Summary: The durability assessment of additively manufactured parts must consider both surface-breaking material discontinuities and porosity, and how these factors interact with as-built parts. The authors have previously shown how the Hartman-Schijve variant of the NASGRO crack growth equation can predict the durability of wire arc additively manufactured specimens with surface-breaking cracks due to surface roughness. This paper demonstrates that the same equation can also be used to predict the durability of specimens with failure caused by surface-breaking porosity.

CRYSTALS (2023)

添加到收藏夹

Article Engineering, Mechanical

A damage tolerance approach for structural integrity of truck trailers

Pu Huang et al.

Summary: A framework based on the damage tolerance concept was proposed to investigate fatigue cracking in heavy truck trailers and improve fatigue resistance through local geometric modifications. The approach was shown to be effective in monitoring structural integrity and designing trailers with longer life and lighter weight.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Mechanics

Development and implementation of a simultaneous fatigue crack growth test setup for polymeric hybrid laminates

Gabriel Riedl et al.

Summary: Delamination is a common failure mode in laminated structures. This study developed a novel fatigue test setup for simultaneous characterization of multiple specimens, which is important for evaluating cyclic debonding resistance and adhesive formulation development.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Near-threshold fatigue crack growth in laser powder bed fusion produced alloy 718

Halsey E. Ostergaard et al.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Mechanical

Assessment of mechanical and fatigue crack growth properties of wire plus arc additively manufactured mild steel components

Muhammad Shamir et al.

Summary: A study was conducted to evaluate the mechanical and fatigue crack propagation properties of wire + arc additively manufactured ER70S-6 components. The hardness values were slightly higher at the bottom and top of the wall. There was a marginal difference in mechanical properties between orientations. The crack growth rates of both deposition strategies were found to be very similar, and the NASGRO crack growth equation can capture the variability in crack growth histories reasonably well.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Crack closure of Ni-based superalloy 718 at high negative stress ratios

Sarah A. Paluskiewicz et al.

Summary: This study investigates the fatigue crack growth mechanisms in nickel-based superalloys under high, negative stress ratios, challenging the classical crack tip shielding and closure concepts. The fatigue crack growth rates and closure levels were evaluated for nickel-based superalloy 718 specimens with single edge notches at 100 degrees C under different stress ratios. Multiple methods were used to calculate the effective driving force for crack growth rates, and the relationships between the effective driving forces, experimentally-measured crack closure levels, and fractographic evidence of damage mechanisms are discussed.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Effect of aging on the fatigue crack growth properties of carbon-polyamide 6 thermoplastic composites using the multi ΔG-control method

Mael Arhant et al.

Summary: This study focuses on the fatigue crack growth behavior of C/PA6 composites under hydrolytic aging at different temperatures. The results show that aging significantly affects the fatigue crack growth properties of the material, and the properties are highly dependent on the molar mass. It is also found that the traditional Paris law cannot fully describe the material's behavior.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Mechanical

Computing the durability of WAAM 18Ni 250 maraging steel specimens

Daren Peng et al.

Summary: This paper illustrates the durability analysis required to certify an additively manufactured part by using the examples of durability tests performed on two wire arc additively manufactured (WAAM) 18Ni 250 Maraging steel specimens.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Crack growth in conventionally manufactured pure nickel, titanium and aluminum and the cold spray additively manufactured equivalents

Rhys Jones et al.

Summary: Recent studies have shown that the da/dN versus ΔK curves associated with crack growth in different manufacturing methods can collapse onto a single master curve, indicating the independence of crack growth behavior from manufacturing processes.

ADDITIVE MANUFACTURING LETTERS (2022)

添加到收藏夹

Article Engineering, Mechanical

Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition

Xiaobin Yu et al.

Summary: This study demonstrates that different heat treatments on LDED IN718 can alter its microstructural characteristics and affect its FCG resistance. By carefully selecting heat treatment conditions, the FCG threshold of IN718 can be significantly increased, making it comparable to wrought IN718.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review

Niloofar Sanaei et al.

Summary: Additive manufacturing is emerging as an alternative method for producing unique and complex parts, with fatigue performance being a key consideration. Defects such as Lack of Fusion, porosities, and un-melted particles can affect fatigue performance, but can be minimized through process optimization and post-processing. Analytical techniques can reduce the need for costly fullscale testing for assessing reliability in fatigue performance.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Mechanics

Defect-based fatigue life prediction of L-PBF additive manufactured metals

Niloofar Sanaei et al.

Summary: This work presents a computational framework for predicting the fatigue life of two metal specimens, considering different treatment conditions and defect sizes. Unlike the commonly assumed crack growth mode in the literature, the appropriate crack growth mode based on the observed failure mechanism is used for fatigue life predictions. Good correlations between experimental results and prediction curves are demonstrated by using Extreme Value Statistics and equivalent defect size based on Murakami's method for approximation of the initial defect size.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Crack growth in adhesives: Similitude and the Hartman-Schijve equation

R. Jones et al.

Summary: This study examines fatigue crack growth in toughened epoxy adhesives used in automotive and aerospace industries, finding that crack growth curves are related to adhesive layer thickness, but this dependency disappears when considering crack-driving force. Similar observations are recorded when effects of test temperature are considered, suggesting that the parameter Delta kappa appears to be a valid similitude parameter.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Physical

Modelling the Variability and the Anisotropic Behaviour of Crack Growth in SLM Ti-6Al-4V

Rhys Jones et al.

Summary: The study examines the variability in crack growth in AM Ti-6Al-4V specimens and highlights the ability of the Hartman-Schijve crack growth equation to capture this variability and anisotropic behavior. Despite the large variability in crack growth, the intrinsic crack growth equation remains unchanged, with changes in both the fatigue threshold and cyclic fracture toughness accounting for the variability and anisotropy observed in the test program.

MATERIALS (2021)

添加到收藏夹

Article Mechanics

Characterising and representing small crack growth in an additive manufactured titanium alloy

Muhammad Shamir et al.

Summary: The study applied the modified Hartman-Schijve equation to predict small crack growth rate in additive manufactured titanium Ti-6Al-4V, with material constants determined by long crack test data. A small fatigue crack test validated the fitted equation, and the predicted fatigue life of a specimen under bending load matched well with the test result. This work suggests that it may be possible to predict both small and long crack growth rates using the modified Hartman-Schijve equation with material constants obtained from long crack tests.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Damage tolerance assessment of AM 304L and cold spray fabricated 316L steels and its implications for attritable aircraft

Rhys Jones et al.

Summary: The study shows that crack growth in AM stainless steels can be represented by the same equation as that of conventionally manufactured materials when taking into account the changes in threshold and toughness due to the fabrication and annealing processes. Cold spray fabricated 316L parts may be suitable for attritable aircraft.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Fatigue crack growth in epoxy polymer nanocomposites

Anthony J. Kinloch et al.

Summary: This paper presents detailed analyses of experimental data on the cyclic-fatigue behavior of epoxy nanocomposite polymers. It establishes key materials parameters and their relationship to the observed fracture and fatigue behavior of these materials, providing insights for material development, selection, design, and service-life prediction in engineering applications.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2021)

添加到收藏夹

Article Chemistry, Physical

Computing the Fatigue Life of Cold Spray Repairs to Simulated Corrosion Damage

Daren Peng et al.

Summary: This paper summarises a study on the durability of cold spray repairs to simulated corrosion damage in AA7075-T7351 aluminium alloy specimens, demonstrating how to perform the mandatory durability analysis of repaired corroded structures in accordance with specified requirements.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Describing crack growth in additively manufactured Scalmalloy

Rhys Jones et al.

Summary: This study investigates crack growth in AM Scalmalloy (R) and demonstrates that the curves essentially collapse onto a single curve associated with the growth of cracks in aluminum alloy AA7075-T7351, potentially simplifying the process for determining upper bound growth curves required for the certification of AM space parts in NASA HDBK-5010.

ADDITIVE MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Engineering, Mechanical

On the fatigue crack growth behaviour of selective laser melting fabricated Inconel 625: Effects of build orientation and stress ratio

Xiaoan Hu et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Feasibility study on Hartman-Schijve data analysis for mode II fatigue fracture of adhesively bonded wood joints

Gaspard Clerc et al.

INTERNATIONAL JOURNAL OF FRACTURE (2020)

添加到收藏夹

Review Chemistry, Physical

Review of Requirements for the Durability and Damage Tolerance Certification of Additively Manufactured Aircraft Structural Parts and AM Repairs

Sudip Kundu et al.

MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Further Studies into Crack Growth in Additively Manufactured Materials

Athanasios P. Iliopoulos et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion

Sumin Kim et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Effect of chemical composition and microstructure on the fatigue crack growth resistance of pearlitic steels for railroad application

L. B. Godefroid et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Mechanics

Nearly Mode I Fracture Toughness and Fatigue Delamination Propagation in a Multidirectional Laminate Fabricated by a Wet-Layup

T. Chocron et al.

PHYSICAL MESOMECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Lessons from a fatigue prediction challenge for an aircraft wing shear tie post

B. Main et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-directional composite laminates: fatigue delamination propagation in mode I-a comparison

Leslie Banks-Sills et al.

INTERNATIONAL JOURNAL OF FRACTURE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Corrosion-Fatigue Evaluation of Uncoated Weathering Steel Bridges

Yu Zhang et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Engineering, Mechanical

Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity

J-R Poulin et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Mechanics

Delamination fatigue growth in polymer-matrix fibre composites: A methodology for determining the design and lifing allowables

Liaojun Yao et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Review Mechanics

Crack growth: Does microstructure play a role?

R. Jones et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape

A. Yadollahi et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of different crack driving forces for describing the fatigue crack growth behaviour of PET-G

A. J. Cano et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Mechanical

On the growth of cracks from etch pits and the scatter associated with them under a miniTWIST spectrum

D. Tamboli et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Mechanical

Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions

J. -R. Poulin et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Mechanical

Representing crack growth in additively manufactured Ti-6Al-4V

R. Jones et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Aerospace

Crack Growth in a Range of Additively Manufactured Aerospace Structural Materials

Athanasios Iliopoulos et al.

AEROSPACE (2018)

添加到收藏夹

Article Engineering, Mechanical

Crack growth at fastener holes containing intergranular cracking

M. Lo et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Mode I delamination propagation and R-ratio effects in woven composite DCB specimens for a multi-directional layup

Ido Simon et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Mechanics

Delamination growth in polymer-matrix fibre composites and the use of fracture mechanics data for material characterisation and life prediction

R. Jones et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

A. J. Brunner et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

Prediction of fatigue life in aluminium alloy (AA7050-T7451) structures in the presence of multiple artificial short cracks

J. T. Tan et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)

添加到收藏夹

Review Engineering, Mechanical

Fatigue crack growth and damage tolerance

R. Jones

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Survey of Formulas Used to Describe the Fatigue Crack Growth Rate

D. Rozumek

MATERIALS SCIENCE (2014)

添加到收藏夹

Article Engineering, Mechanical

Compression precracking methods to generate near-threshold fatigue-crack-growth-rate data

J. C. Newman et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.