Microstructure and Mechanical Properties in a Gd-Modified Extruded Mg-4Al-3.5Ca Alloy

In the present study, the microstructure and mechanical properties of a new Mg-4Al-3.5Ca-2Gd (AXE432) alloy are investigated. The microstructure of the as-cast AXE432 alloy consists of alpha-Mg, C14 (Mg2Ca), and C36((Mg, Al)(2)Ca) phases. After the heat treatment at 480 C-circle for 8 h, the C14 with fine lamellar structure changes from narrow stripes to micro-scale particles, and part of the C36 and the C14 dissolve into the alpha-Mg matrix, with many short needle-shaped C15 (Al2Ca) phase precipitating in the primary a-Mg grains. The AXE432 alloy extruded at a temperature as high as 420 C-circle exhibits a refined dynamically recrystallized (DRXed) microstructure with grain sizes less than 1.5 +/- 0.5 mu m and a strong {0001}< 10 $(1) over bar $0 > basal texture with a maximum intensity of 5.62. A complex combination of the effects from grain size, texture, second-phase particles, and strain hardening results in balanced mechanical properties, with the tensile yield strength (TYS), ultimate tensile strength (UTS), elongation (El), compressive yield strength (CYS), and ultimate compressive strength (UCS) of 331.4 +/- 2.1 MPa, 336.9 +/- 3.8 MPa, 16.1 +/- 2.3%, 270.4 +/- 1.6 MPa and 574.5 +/- 12.4 MPa, respectively.

Automated summary

The microstructure and mechanical properties of a new Mg-4Al-3.5Ca-2Gd (AXE432) alloy were investigated. After heat treatment, the alloy exhibited a refined microstructure with small grain sizes and a strong basal texture. The alloy also demonstrated balanced mechanical properties due to a combination of factors such as grain size, texture, second-phase particles, and strain hardening.