相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Phase-Change-Enabled, Rapid, High-Resolution Direct Ink Writing of Soft Silicone
Yiliang Wang et al.
ADVANCED MATERIALS (2022)
Biomimetic Flow Sensor for Detecting Flow Rate and Direction as an Application for Maneuvering Autonomous Underwater Vehicle
Le-Giang Tran et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)
A Systematic Approach for Developing 3D High-Quality PDMS Microfluidic Chips Based on Micromilling Technology
Amin Javidanbardan et al.
MICROMACHINES (2022)
A low-cost and simple-fabricated epidermal sweat patch based on cut-and-paste manufacture
Teng Sun et al.
SENSORS AND ACTUATORS B-CHEMICAL (2022)
The Focused Electrode Ring for Electrohydrodynamic Jet and Printing on Insulated Substrate
Zeshan Abbas et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2022)
All-Printed Flexible and Stretchable Electronics with Pressing or Freezing Activatable Liquid-Metal-Silicone Inks
Lu-yu Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Inkjet Pattern-Guided Liquid Templates on Superhydrophobic Substrates for Rapid Prototyping of Microfluidic Devices
Xiaochen Lai et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Ievgenii Liashenko et al.
NATURE COMMUNICATIONS (2020)
Superelastic, Sensitive, and Low Hysteresis Flexible Strain Sensor Based on Wave-Patterned Liquid Metal for Human Activity Monitoring
Jing Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method
Xiang Chi et al.
SENSORS (2020)
Surface roughness improvement of 3D printed microchannel
Kunpeng Zhang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2020)
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Ruitao Su et al.
SCIENCE ADVANCES (2020)
Hierarchically Molecular Imprinted Porous Particles for Biomimetic Kidney Cleaning
Hanxu Chen et al.
ADVANCED MATERIALS (2020)
Low-cost and simple FDM-based 3D-printed microfluidic device for the synthesis of metallic core-shell nanoparticles
Lucas P. Bressan et al.
SN APPLIED SCIENCES (2020)
Multiscale 3D-printing of microfluidic AFM cantilevers
Robert C. L. N. Kramer et al.
LAB ON A CHIP (2020)
Emerging trends in multiscale modeling of vascular pathophysiology: Organ-on-a-chip and 3D printing
Karli Gold et al.
BIOMATERIALS (2019)
3D Printing of Bioinspired Structural Materials with Fibers Induced by Doctor Blading Process
Luquan Ren et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports
Andre D. Castiaux et al.
ANALYTICAL CHEMISTRY (2019)
Silicones for Stretchable and Durable Soft Devices: Beyond Sylgard-184
Sungjune Park et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Micro-optics for microfluidic analytical applications
Hui Yang et al.
CHEMICAL SOCIETY REVIEWS (2018)
Capillary microfluidics in microchannels: from microfluidic networks to capillaric circuits
Ayokunle Olanrewaju et al.
LAB ON A CHIP (2018)
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Hyunwoo Yuk et al.
ADVANCED MATERIALS (2018)
Vacuum filling of complex microchannels with liquid metal
Yiliang Lin et al.
LAB ON A CHIP (2017)
A Review on 3D Printed Smart Devices for 4D Printing
Jeongwoo Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
3D Printing: It's Microfluidic Functions and Environmental Impacts
Abhishek Sharma et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Design and fabrication of a 3D printed miniature pump for integrated microfluidic applications
Muhd Nazrul Hisham Zainal Alam et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
Direct Writing of Microfluidic Footpaths by Pyro-EHD Printing
Sara Coppola et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D-printed microfluidic devices: fabrication, advantages and limitations-a mini review
Chengpeng Chen et al.
ANALYTICAL METHODS (2016)
3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels
Dishit P. Parekh et al.
LAB ON A CHIP (2016)
An integrated design and fabrication strategy for entirely soft, autonomous robots
Michael Wehner et al.
NATURE (2016)
Laser-assisted direct ink writing of planar and 3D metal architectures
Mark A. Skylar-Scott et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Multiprocess 3D printing for increasing component functionality
Eric MacDonald et al.
SCIENCE (2016)
Skin-inspired hydrogel-elastomer hybrids with robust interfaces and functional microstructures
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS (2016)
Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Kimberly A. Homan et al.
SCIENTIFIC REPORTS (2016)
3D printed fluidic valves for remote operation via external magnetic field
Seokbeom Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Patterned Polydiacetylene-Embedded Polystyrene Nanofibers Based on Electrohydrodynamic Jet Printing
Chiho Song et al.
MACROMOLECULAR RESEARCH (2015)
A multi-scale PDMS fabrication strategy to bridge the size mismatch between integrated circuits and microfluidics
Melaku Muluneh et al.
LAB ON A CHIP (2014)
High-Throughput Printing via Microvascular Multinozzle Arrays
Christopher J. Hansen et al.
ADVANCED MATERIALS (2013)
Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting
Chuang Wei et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
A study of the production and reversible stability of EGaIn liquid metal microspheres using flow focusing
Jacob Thelen et al.
LAB ON A CHIP (2012)
Fabrication of circular microfluidic channels by combining mechanical micromilling and soft lithography
Mary E. Wilson et al.
LAB ON A CHIP (2011)
Microfluidic stretchable RF electronics
Shi Cheng et al.
LAB ON A CHIP (2010)
Templateless prototyping of polydimethylsiloxane microfluidic structures using a pulsed CO2 laser
Hao-Bing Liu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Microfluidics: Applications for analytical purposes in chemistry and biochemistry
Ken-ichi Ohno et al.
ELECTROPHORESIS (2008)
High-resolution electrohydrodynamic jet printing
Jang-Ung Park et al.
NATURE MATERIALS (2007)
Developing optofluidic technology through the fusion of microfluidics and optics
Demetri Psaltis et al.
NATURE (2006)