☆ 4.6 Article

Synthesizing an inorganic-rich solid electrolyte interphase by tailoring solvent chemistry in carbonate electrolyte for enabling high-voltage lithium metal batteries

JOURNAL OF ENERGY CHEMISTRY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Applied

Lithium nitrate regulated carbonate electrolytes for practical Li-metal batteries: Mechanisms, principles and strategies

Kun Wang et al.

Summary: Li-metal batteries (LMBs) are attracting research attention again due to their high-energy requirements. Commercial carbonate electrolytes have unfavorable reactions with the Li-metal anode, leading to the formation of unstable solid electrolyte interphase (SEI) and Li dendrites. However, the incorporation of lithium nitrate (LiNO3) into commercial carbonate electrolytes can successfully stabilize the SEI and enable dendrite-free Li-metal anode, making LMBs practical.

JOURNAL OF ENERGY CHEMISTRY (2023)

添加到收藏夹

Article Chemistry, Physical

Cationic Size Effect Promoting Dissolution of Nitrate Anion in Ester Electrolyte for Lithium-Metal Batteries

Zhijie Guo et al.

Summary: In this study, it is demonstrated that the cationic size effect promotes the dissolution of NO3- in an ester electrolyte and a SEI layer containing Li3N is successfully constructed. By adjusting the size of quaternary ammonium, a high solubility of tetraethylammonium nitrate in ethylene carbonate is achieved, thereby improving the cycling life of lithium metal batteries and lithium-ion batteries.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Applied

Evaluation on a 400 Wh kg-1 lithium-sulfur pouch cell

Ge Ye et al.

Summary: This paper systematically evaluates high-energy-density Li-S pouch cells, revealing the working and failure mechanism of Li-S batteries under practical conditions. The study found considerable lithium polysulfides in the electrolyte with high capacity retention in sulfur redox reactions, and identified severe morphology change in lithium metal anode with substantial active lithium supporting subsequent cycles.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Organic-inorganic composite SEI for a stable Li metal anode by in-situ polymerization

Wenzhuo Cao et al.

Summary: A new organic-inorganic composite solid electrolyte interface (SEI) membrane has been developed, which effectively improves the side reactions between Li metal anode and electrolyte, enhancing the safety and cycling performance of the battery.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing Self-Adapting Electrostatic Interface on Lithium Metal Anode for Stable 400 Wh kg-1 Pouch Cells

Peiyu Zhao et al.

Summary: The stable and flexible electrostatic self-adapting PBM interface effectively regulates lithium-ion deposition to achieve dendrite-free lithium metal batteries under harsh conditions, with high Coulombic efficiency and cycling stability. The PBM interface also features a low reduction potential and long-term stability, enabling high energy density and cycling stability in realistic conditions.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

Facile and scalable fabrication of lithiophilic CuxO enables stable lithium metal anode

Yanmei Nie et al.

Summary: This study presents a facile method to synthesize a stable lithium metal anode material, which allows for the homogeneous deposition and stripping of lithium metal, improving the performance of lithium metal batteries. The findings provide guidelines for the design and fabrication of lithiophilic 3D matrixes, promoting the practical use of lithium metal batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Engineering, Chemical

Lithiophilicity: The key to efficient lithium metal anodes for lithium batteries

Yahao Li et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Article Engineering, Chemical

Protein-modified SEI formation and evolution in Li metal batteries

Chenxu Wang et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Article Engineering, Chemical

Diluent decomposition-assisted formation of LiF-rich solid-electrolyte interfaces enables high-energy Li-metal batteries

Junbo Zhang et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Review Chemistry, Applied

Artificial interphases enable dendrite-free Li-metal anodes

Qiankui Zhang et al.

Summary: This review summarizes strategies developed recently to stabilize the Li/electrolyte interface by constructing protective interphases on Li-metal anodes. It outlines the current understanding of the instability of the Li/electrolyte interface, illustrates artificial interphases constructed recently, and prospects possible approaches to acquire more efficiently protective interphases.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Long-Life and High-Rate-Charging Lithium Metal Batteries Enabled by a Flexible Active Solid Electrolyte Interphase Layer

Da Zhang et al.

Summary: This study introduces a simple method of adding multifunctional fluorosulfonate to commercial electrolytes to increase inorganic LiF content in the SEI of lithium metal batteries. The formation of a flexible interface layer inhibits the growth of lithium dendrites, leading to stable fast charge cycles. This innovative approach provides insights into the practical application of the new electrolyte and offers a new idea for building a stable SEI in commercial lithium metal batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid Electrolyte with Dual-Anion-Aggregated Solvation Sheath for Stabilizing High-Voltage Lithium-Metal Batteries

Xianshu Wang et al.

Summary: This study proposed a dual-salt electrolyte with LiPF6 and LiNO3 to stabilize high-voltage LMBs, improving Li plating/stripping kinetics with a unique Li+ solvation and forming a uniform solid electrolyte interface (SEI) layer. The electrolyte system enabled large Li deposits with high Coulombic efficiency and excellent lifespan in full batteries at 4.3 V.

ADVANCED MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review on Li Deposition in Working Batteries: From Nucleation to Early Growth

Xiao-Ru Chen et al.

Summary: Lithium metal as a promising alternative anode material for high-energy-density batteries is crucial in the new era of advanced energy storage. Understanding the deposition mechanism from nucleation to early growth is essential for improving battery performance and dendrite-free deposition behavior. Various models have been proposed to enhance the insight into the lithium deposition process, opening up new possibilities for practical lithium metal batteries.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Inorganic-Rich Solid Electrolyte Interphase for Advanced Lithium-Metal Batteries in Carbonate Electrolytes

Sufu Liu et al.

Summary: In this study, an inorganic-rich solid electrolyte interphase (SEI) was designed on the Li-metal surface in carbonate electrolytes to reduce the bonding energy with Li metal, enabling high Li plating/stripping efficiency and cycling performance. The weak bonding of the SEI to Li promotes Li diffusion and prevents Li dendrite penetration, resulting in a high Coulombic efficiency during cycling.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Visualizing Lithium Dendrite Formation within Solid-State Electrolytes

Minghao Sun et al.

Summary: The study provides important insights into the growth mechanisms of lithium dendrites within a working lithium battery through in situ microscopic observation of lithium deposition inside the solid-state electrolyte (SSE). It revealed the direct nucleation and propagation of Li within the SSE, leading to structural cracking, possibly caused by crystalline defects present in the SSE.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

How Does External Pressure Shape Li Dendrites in Li Metal Batteries?

Xin Shen et al.

Summary: External pressure has a significant impact on the morphology and performance of Li metal batteries, affecting the electroplating reactions and the shape of dendrites. A phase diagram of routine electrolytes under various external pressures has been established, providing rational guidance for designing pressure management systems in batteries.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase

Jian Tan et al.

Summary: Rechargeable lithium batteries have transformed energy storage technology, but their further commercialization is hindered by short lifetime and safety issues, mainly due to the unstable solid-electrolyte interphase (SEI) and uncontrolled lithium dendrite growth. Research on SEI worldwide has focused on its debated structure and composition, particularly the role of the main component LiF. This review covers the development history of the SEI model, fundamental understanding of SEI, categorization of anode materials generating LiF in SEI, characterization techniques of SEI layers, transport mechanism of Li+ ions within SEI, physical properties of LiF, and analysis of LiF sources, offering insights for future research directions to promote large-scale applications of lithium metal batteries.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Robust Cycling of Ultrathin Li Metal Enabled by Nitrate-Preplanted Li Powder Composite

Dahee Jin et al.

Summary: A composite electrode with preplanted LiNO3 on Li metal powder (LN-LMP) was designed to stabilize the LMP surface and enhance the performance of Li metal batteries (LMBs). The LN-LMP electrode showed excellent cycling performance and outperformed cells with LiNO3-containing electrolytes.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Applied

Gallium-based anodes for alkali metal ion batteries

Wenjin Yang et al.

Summary: Alkali metal ion batteries are crucial in the energy revolution due to their large capacity/power density and abundance of alkali metal ions. Gallium-based materials with impressive capacity utilization and self-healing ability offer a potential solution to the inherent deficiencies of current anodes.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Lithium Metal Batteries Enabled by Synergetic Additives in Commercial Carbonate Electrolytes

Nan Piao et al.

Summary: By introducing lithium nitrate (LiNO3) and fluoroethylene carbonate (FEC) into commercial 1 M LiPF6/EC-DMC electrolytes, an inorganic-enhanced LiF-Li3N SEI was designed to improve the Li plating/stripping Coulombic efficiency to 99.6% in 100 cycles. This strategy enabled a lithium metal anode cell to achieve an average CE of 99.7% and a capacity retention of 90.8% after 150 cycles, demonstrating high performance in commercial carbonate electrolytes.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Self-Limited Free-Standing Sulfide Electrolyte Thin Film for All-Solid-State Lithium Metal Batteries

Gao-Long Zhu et al.

Summary: An ultrathin, flexible, and chemically compatible Argyrodite SSE film was designed in this study, using a self-limited strategy with cellulose membrane as the skeleton to enhance its mechanical properties and ionic conductivity. The SSE film exhibited stable performance and high-rate capability in various types of all-solid-state lithium metal batteries, indicating its potential for high-energy-density applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Fluoride in Electrolyte for Stable and Safe Lithium-Metal Batteries

Yi-Hong Tan et al.

Summary: Electrolyte engineering with fluorinated additives has the potential to enhance cycling stability and safety of high-energy Li-metal batteries. The electrolyte developed in this study utilizing a porous lithium fluoride strategy demonstrated nonflammability and high electrochemical performance, leading to stable cycling of Li-metal anodes even at high current densities. This new electrolyte engineering strategy offers promise for stable and safe Li-metal batteries.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A Multifunctional Dual-Salt Localized High-Concentration Electrolyte for Fast Dynamic High-Voltage Lithium Battery in Wide Temperature Range

Shuangshuang Lin et al.

Summary: This study introduces a multifunctional high-concentration electrolyte containing fluorocarbonate, which shows excellent performance under high voltage and low temperature conditions, providing a new approach for designing high-performance lithium batteries.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Elemental Foil Anodes for Lithium-Ion Batteries

Brian T. Heligman et al.

Summary: Aluminum, indium, tin, and lead are identified as promising candidates for alloying anodes, offering a potential 40-50% improvement in energy density over current graphite-based systems. These materials not only have high capacities but also show remarkable formation efficiencies, laying the groundwork for designing stable foil anodes for high-energy-density batteries.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode

Anjun Hu et al.

Summary: An artificial hybrid SEI layer composed of lithium-antimony alloy and lithium fluoride was constructed to reduce electron tunneling between the Li anode and SEI, resulting in uniform Li deposition and stable Li plating/stripping behaviors at an ultrahigh rate. This work uncovers the internal mechanism of Li+ transport within the SEI component, providing a pathway to stabilize the Li anode under practical high-rate conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enabling High-Voltage Lithium Metal Batteries by Manipulating Solvation Structure in Ester Electrolyte

Yulin Jie et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Colossal Granular Lithium Deposits Enabled by the Grain-Coarsening Effect for High-Efficiency Lithium Metal Full Batteries

Weidong Zhang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Investigation of polysulfone film on high-performance anode with stabilized electrolyte/electrode interface for lithium batteries

Yuyan Ma et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Applied

PIM-1 as an artificial solid electrolyte interphase for stable lithium metal anode in high-performance batteries

Qiuli Yang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithiophilic Zn Sites in Porous CuZn Alloy Induced Uniform Li Nucleation and Dendrite-free Li Metal Deposition

Shang-Sen Chi et al.

NANO LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Engineering Wavy-Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li-Metal Full Batteries

Weidong Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

The origin of sulfuryl-containing components in SEI from sulfate additives for stable cycling of ultrathin lithium metal anodes

Jin-Xiu Chen et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries

Jiale Fu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Engineering, Chemical

A review on the failure and regulation of solid electrolyte interphase in lithium batteries

Jun-Fan Ding et al.

Journal of Energy Chemistry (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Lithium Metal-Based Composite: An Emerging Material for Next-Generation Batteries

Ying Huang et al.

MATTER (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Combining theory and experiment in lithium-sulfur batteries: Current progress and future perspectives

Xiang Chen et al.

MATERIALS TODAY (2019)

添加到收藏夹

Article Chemistry, Physical

Tuning the LUMO Energy of an Organic Interphase to Stabilize Lithium Metal Batteries

Weidong Zhang et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Regulating Anions in the Solvation Sheath of Lithium Ions for Stable Lithium Metal Batteries

Xue-Qiang Zhang et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in Interfaces between Li Metal Anode and Electrolyte

Xue-Qiang Zhang et al.

ADVANCED MATERIALS INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Robust Pinhole-free Li3N Solid Electrolyte Grown from Molten Lithium

Yanbin Li et al.

ACS CENTRAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Voltage Lithium-Metal Batteries Enabled by Localized High-Concentration Electrolytes

Shuru Chen et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Electronic and Ionic Channels in Working Interfaces of Lithium Metal Anodes

Xin-Bing Cheng et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries

Chong Yan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode

Yayuan Liu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.